AG-82X9-S-09-0161 a 2.pdf

NSN 7540-01-152-8070 STANDARD FORM 30 (REV. 10-83)

Previous edition unusable Prescribed by GSA FAR (48 CFR) 53.243

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE USDA Forest Service Rocky Mountain Region AQM / Cody 808 Meadow Lane Avenue Cody, WY 82414

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATE (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACT/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MDE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying offices, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section heading, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of this document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

David H. Johnson, Contracting Officer

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C DATE SIGNED

(Signature of person authorized to sign)

(Signature of Contracting Officer)

General Decision Number: WY080008 05/22/2009 WY8

Superseded General Decision Number: WY20070008

State: Wyoming

Construction Type: Highway

Counties: Albany, Big Horn, Campbell, Carbon, Converse, Crook, Fremont, Goshen, Hot Springs, Johnson, Lincoln, Niobrara, Park, Platte, Sheridan, Sublette, Sweetwater, Teton, Uinta, Washakie and Weston Counties in Wyoming.

Modification Number Publication Date 0 02/08/2008 1 06/20/2008 2 05/22/2009

* SUWY2009-003 04/28/2009

Rates Fringes

CARPENTER........................$ 16.00 4.04

Concrete Finisher................$ 19.42 3.38

Ironworker.......................$ 18.00 13.00

LABORER (Other Than Tunnel & Underground Work) Group 1.....................$ 13.00 2.61 Group 2.....................$ 14.86 3.42

LABORER CLASSIFICATIONS

(Excluding Tunnel and Underground Work)

GROUP 1: Axman; Hand Faller; Bin Wall Installer Laborer;

Concrete Worker (Wet or Dry); Concrete Worker (Curing and Drying); Dumpman; Erector and Installer - includes the installation and erection of fences, snow fences, guardrails, median rails, median posts, signs, and right of way marker;

Flag Person (Traffic Control); Form stripper; Form Setter Laborer (Paving); General Laborer; Gunite Laborer; Heater Tender; Landscape Laborer; Material Handler (Lumber, Rods, Cement, Concrete); Nozzleman (Air and Water); Pilot Car Driver; Pipe setter Laborer (Non-metallic); Pipe setter Laborer (Corrugated); Pre-Watering, pre-setting, and pre-irrigation (all work); Riprap Man; Sandblaster Pot Tender;

Signal man, grade concrete, etc; Scissor man or hopper man;

Stake Jumper for equipment; Tar and Asphalt Pot Tender; and Wrecking and Demolition Crew.

GROUP 2: Asphalt Raker and Tamper; Bin Wall Installer, Cement Mason Tender; Chuck Tender; Concrete Saw; Form Setter (Paving); Gunite Nozzleman; Hand Operated Vibratory Roller;

High Scaler (Using air tools from bosn chair, swing stage lift belt, or block and tackle shall receive $.20 per hour more than the classified rate); Landscaper; Maintainer (Traffic Control); Mortar man on stone riprap; Operator of pneumatic, electric gas tamper, and similar mechanical tools; Pipe setter (corrugated, culvert pipe, sectional multi-plate and similar type); Pipe setter, Pipelayer (non-metallic); Pipe wrapper;

Powderman tender; Power type concrete buggy (Push ride); Power saw operator (clearing); Vibrator-concrete; Jackhammer and pavement breaker; Sandblaster nozzleman; Sewer pipe installer (non-metallic), clay, concrete, etc. (caulker, collarman, jointer, mortarman, rigger, jacker)

LABORER (Tunnel & Underground Work) Group 1.....................$ 15.32 Group 2.....................$ 33.40 9.28

LABORER CLASSIFICATION - TUNNEL AND UNDERGROUND WORK

GROUP 1: Powderman and Blaster; Wagon Drill; Air-Trac;

Diamond and Other Drills for Blasting Powder or Grouting.

GROUP 2: Miner (Driller); Machineman; Timberman; Steelman;

Drill Doctor; Form Setter and Mover; Spader; Tuggers; Spilling and/or Caisson Worker; Powderman; Jackhammerman; Finisher.

Line Construction (Underground Communication Work & All Motor Traffic Controlling, Street & Highway Lighting) Equipment Operator..........$ 20.00 Groundman...................$ 16.68 8.65 Inside Wireman (Load Side of Meter)...................$ 18.00 8.00 Lineman (Line Side of Meter)......................$ 25.98 6.48

PAINTER

Brush & Spray...............$ 18.25 2.00

POWER EQUIPMENT OPERATOR

Group 1.....................$ 21.10 4.72 Group 2.....................$ 21.10 4.72 Group 3.....................$ 23.82 5.38 Group 4.....................$ 23.82 5.38

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

ALL ELECTRICAL WORK IS EXCLUDED. FOR ELECTRICAL WORK, USE

EQUIPMENT OPERATOR CLASSIFICATION LISTED UNDER LINE

CONSTRUCTION.

GROUP 1: Auger Machine Operator (Post Holes, etc.); Air Compressor (Over 315 cu. ft. cap.); Backhoe (to 1.5 cu. yds.);

Batch Bin Weighman, Scissorman, or Hopperman; Brakeman; Broom Operator (Self-Propelled); Cableway Signalman (Bellboy); Chip Spreader Operator; Concrete Saw (Self-Propelled); Conveyor Belt Operator; Crusher Oiler; Front End Loader (to 1.5 cu.

yds.); Form Grader Operator; Fork Lift and Lumber Stacker;

Joint Machine Operator; Longitudinal Float Operator; Mixer, Operator Concrete (under 1 yard); Oiler, Utility; Power Loader, belt and buckle type; Pump Operator; Roller Operator, Self-Propelled, (Pneumatic, rubber tired, sheep foot, vibratory or combination type); Screed Operator; Screening Plant Operator; Tire Repairman; Tractor Operator: Farm, crawler, or wheel type (60 horsepower drawbar or less) with or without use of power attachments).

GROUP 2: Air Compressor, two or more machines or tunnels, shafts, raises, or Plant Operator; Asphalt Plant Operator;

Backhoe (1.5 cu. yds. to 3.5 cu. yds.); Bituminous Laydown Machine Operator; CMI Machine (Auto Grader); Concrete Batch Plant Operator; Concrete Finish Machine Operator; Concrete Multi Blade Span Saw (Hunt Process or Similar); Concrete Spreader and Paver Operator; Crusher Operator; Drilling Machine, Intergrated (Core, Rotary, Caisson, Diamond);

Elevating Grader Operator; Front End Loader (1.5 cu. yds. to

3.5 cu. yds.); Hydro-type Crane to 50 Tons; Mixer Operator, Base Course Pugmill Type I; Mixer Operator, Concrete (Over one yard); Motor Patrol Operator (All, excluding finish); Mucking Machine Operator (All Types); Mulching Machine Operator; Oiler (Crane and Shovels); Pavement Breaker, Hydro-Tamper and similar type machines; Pumpcrete Operator; Roller Operators (Tandem Steel Wheel, three axle or three wheel); Scraper Equipment (all types); Scraper Equipment (Multiple units, fifteen cents per hour additional per unit); Shovels, Draglines, Cranes, Piledrivers and Truck Mounted Cranes (Mfg.

rating: up to 3.5 cu. yds., or 50 tons, all attachments);

Shuttle Car Operator; Subgrade Machine Operator (power);

Tractor Operators: Cold Milling, all with use of power attachments and including pushcat, dozer, tournadozer, etc.

(the use of power attachments shall not include disking, pulling of rollers or similar unskilled actions); Trenching Machine Operator(Excludes Electrical Work); Wash Plant Operator; and Welder.

GROUP 3: Front End Loader (3.5 cu. yds. to 7 cu. yds.); Heavy Duty Mechanic, Machine Doctor; Hoist Operator (Two or more drums, shafts, or raises); Motor Patrol Operator (Finish);

Shovels, Draglines, Piledrivers, and Truck Mounted Cranes (Mft. rating: 3.5 cu. yds. to 7 cu. yds., or 50 to 90 tons, all attachments); and Wheel Excavator Operator

GROUP 4: Cableway Operator; Crane, 90 Tons and Over, (Whirley, gantry, stiffleg, overhead and traveling type);

Mixer Operator, (Dual Drum); Shovels, Draglines, Piledrivers and Truck Mounted Cranes (Mfg. rating: 7 cu. yds. and over, or 90 tons and over, all attachments).

TRUCK DRIVER: Tireperson Group 1.....................$ 17.25 3.56 Group 2.....................$ 18.11 2.09 Group 3.....................$ 18.27 2.79

TRUCK DRIVER CLASSIFICATIONS

GROUP 1: Pick-Up Truck Driver (When used for hauling); Dump Truck Driver (To and Including 7 cu. yds.); Snow Plow Truck Driver (the cu. yd. rate of the truck); Gravel Spreader; Flat Rack Material Truck Driver (Less than 2 Tons); Gang Truck Driver; Stringing Truck Driver (Single Axle Type); Water Truck Driver (2,500 Gal or Less); Fuel Service Truck Driver;

Greaseman, Tireman, Servicemen; Oil Distributor Truck Driver (2,500 Gal. or Less).

GROUP 2: Dump Truck Driver (Over 7 cu. yds. to and including 13 cu. yds.); Flat Rack Material Truck Driver (Over 2 Tons to 5 Tons); Utility Winch Truck Driver; "A" Frame Truck Driver;

Material Checker; Transit Mix or Wet Mix Truck Driver; Power Broom Driver; Water Truck Driver (Over 2,500 Gal. to and including 3,600 Gal.); Oil Distributor Truck Driver (Over 2,500 Gal. to and including 3,600 Gal.)

GROUP 3: Dump Truck Driver (Over 13 cu. yds. to and including 45 cu. yds.); Low Boy and Tandem Axle Float Driver; Multiple Axle Type Truck: Semi; Winch Trailer Truck Driver; Water Truck Driver (Over 3,600 Gal.); Oil Distributor Truck Driver (Over 3,600 Gal.); Truck Mechanics; and Flat Rack Material Truck Driver (Over 5 Tons).

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29 CFR 5.5(a)(1)(ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in he matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION