AG-7DF5-S-17-0004.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

7A86

HOT SPRINGS AR 71901

100 RESERVE STREET

OUACHITA NATIONAL FOREST

CODE 16. ADMINISTERED BYCODE

X

X

X

541370

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR7DF5

RFPIFB

10. THIS ACQUISITION ISCODE

RFQ

14. METHOD OF SOLICITATION

13b. RATING

NAICS:

SMALL BUSINESS

08/07/2017 1400 CT

07/06/2017

501-321-5324JAY TOBIN

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

AG-7DF5-S-17-0004

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 44 OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

15. DELIVER TO

LUFKIN TX 75904

2221 N RAGUEST STREET

NATIONAL FORESTS IN TEXAS

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

$15.00

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

11.

SEE SCHEDULE

12. DISCOUNT TERMS

THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

8(A)

USDA FOREST SERVICE

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

NATIONAL FORESTS AND GRASSLANDS IN TEXAS BOUNDARY

LINE MAINTENANCE SERVICES Per the Schedule of Items and Performance Work Statement

This solicitation includes four option years which if exercised could extend the period of performance through September 30, 2022. The period of performance for the base year will start at date of award or 09/01/2017, whichever is later.

Period of Performance: 09/01/2017 to 09/30/2018

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

XX

DATED

JAY G. TOBIN

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

OFFER

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT:

REF.

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 2/2012) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

001 Boundary line maintenance services

Product/Service Code: R404

Product/Service Description: SUPPORT-

PROFESSIONAL: LAND SURVEYS-CADASTRAL

(NON-CONSTRUCTION)

EQUAL OPPORTUNITY CLAUSE

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual's income is derived from any public assistance program. (Not all prohibited bases apply to all programs.)

Persons with disabilities who require alternative means for communication of program information

(Braille, large print, audiotape, etc.) should contact USDA's TARGET Center at (202)720-2600

(voice and TDD). To file a complaint of discrimination, write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, DC 20250-9410, or call (800) 795-3272

(voice) or (202) 720-6382 TDD). USDA is an equal opportunity provider and employer.

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

44 2 of

AG-7DF5-S-17-0004

Boundary Line Maintenance Services

National Forests and Grasslands in Texas

BOUNDARY LINE MAINTENANCE SERVICES

Headquarters/Supervisor’s Office (Lufkin, TX), Angelina National Forest (Zavalla, TX), Caddo / LBJ National Grasslands (Decatur, TX), Davy Crockett National Forest (Kennard, TX), Sabine National Forest Sabine, TX), Sam Houston National Forest (New Waverly, TX).

OVERVIEW

This solicitation will result in Performance Based, Indefinite Delivery - Indefinite Quantity (IDIQ) Multiple Award Task Order Contracts (MATOC) as best meets the needs of the Government as determined by the awarding Contracting Officer. These contracts will have a base period, which runs through September 30, 2018 and four option years, which if exercised could extend contract performance through September 30, 2022. There is no guarantee that any options will be exercised by the Government.

Individual task orders will normally be competed among MATOC awardees. The Government expressly reserves the right to limit competition in order to meet minimum contract obligations or as may otherwise be determined to be in its best interests. Prices are subject to negotiation on any competed task orders.

The Government reserves the right to adjust the quantity ordered on any task order based on the availability of funds.

SCHEDULE OF ITEMS

Base Year: Award thru September 30, 2018

ITEM

NO.

BOUNDARY LINE

MAINTENANCE

QTY

MILES

QTY

CORNERS

PRICE/

MILE

PRICE/

CORNER

TOTAL

PRICE

MILES

TOTAL

PRICE

CORNERS

TOTAL

PRICE

101 Angelina District 0 0 $ $ $ $ $

102 Caddo/LBJ District 9.54 35 $ $ $ $ $

103 Davy Crockett District 14.69 41 $ $ $ $ $

104 Sabine District 9.95 43 $ $ $ $ $

105 Sam Houston District 13.83 51 $ $ $ $ $

48.01 170 $ $ $

Quantities are estimated.

Option Year 1: October 1, 2018 thru September 30, 2019

BOUNDARY LINE

MAINTENANCE

QTY

MILES

QTY

CORNERS

PRICE/

MILE

PRICE/

CORNER

TOTAL

PRICE

MILES

TOTAL

PRICE

CORNERS

TOTAL

PRICE

201 Angelina District 50 50 $ $ $ $ $

202 Caddo/LBJ District 50 50 $ $ $ $ $

203 Davy Crockett District 50 50 $ $ $ $ $

204 Sabine District 50 50 $ $ $ $ $

205 Sam Houston District 50 50 $ $ $ $ $

250 250 $ $ $

Option Year 2: October 1, 2019 thru September 30, 2020

BOUNDARY LINE

MAINTENANCE

QTY

MILES

QTY

CORNERS

PRICE/

MILE

PRICE/

CORNER

TOTAL

PRICE

MILES

TOTAL

PRICE

CORNERS

TOTAL

PRICE

301 Angelina District 50 50 $ $ $ $ $

302 Caddo/LBJ District 50 50 $ $ $ $ $

303 Davy Crockett District 50 50 $ $ $ $ $

304 Sabine District 50 50 $ $ $ $ $

305 Sam Houston District 50 50 $ $ $ $ $

Option Year 3: October 1, 2020 thru September 30, 2021

BOUNDARY LINE

MAINTENANCE

QTY

MILES

QTY

CORNERS

PRICE/

MILE

PRICE/

CORNER

TOTAL

PRICE

MILES

TOTAL

PRICE

CORNERS

TOTAL

PRICE

401 Angelina District 50 50 $ $ $ $ $

402 Caddo/LBJ District 50 50 $ $ $ $ $

403 Davy Crockett District 50 50 $ $ $ $ $

404 Sabine District 50 50 $ $ $ $ $

405 Sam Houston District 50 50 $ $ $ $ $

Option Year 4: October 1, 2021 thru September 30, 2022

BOUNDARY LINE

MAINTENANCE

QTY

MILES

QTY

CORNERS

PRICE/

MILE

PRICE/

CORNER

TOTAL

PRICE

MILES

TOTAL

PRICE

CORNERS

TOTAL

PRICE

501 Angelina District 50 50 $ $ $ $ $

502 Caddo/LBJ District 50 50 $ $ $ $ $

503 Davy Crockett District 50 50 $ $ $ $ $

504 Sabine District 50 50 $ $ $ $ $

505 Sam Houston District 50 50 $ $ $ $ $

PERFORMANCE WORK STATEMENT

DIVISION 100 – GENERAL SPECIFICATIONS

110 – Scope of Contract The contractor shall provide all materials, labor, equipment, tools, transportation, supervision, expertise, and other incidentals necessary, except as otherwise provided, to successfully complete property boundary maintenance services “AS REQUIRED” in accordance with attached and referenced Specifications and Exhibits. The work may include, but is not limited to:

A. Marking and quantification of property lines along Forest Service administered lands.

B. Maintenance of previously marked property lines of Forest Service administered lands.

C. Identification and maintenance of land and/or property corners.

D. Preparation of Form 7100-52, Corner Record, for each Forest Service property corner as maintained.

PERFORMANCE OF SIMILAR WORK BY THE GOVERNMENT: Nothing in this contract restricts the Government from performing any of the work with its own organization and workforce.

120 – Description and Location The work is to perform boundary maintenance on the National Forests and Grasslands in Texas on the Caddo, Lyndon B. Johnson, Davy Crocket, Angelina, Sabine and Sam Houston Ranger Districts.

Supplemental exhibits for individual project work sites will be provided when necessary with the delivery or task orders issued by the Government.

130 – Government Furnished Property Unless directed otherwise, Government-furnished property will be stored at the work centers of the Ranger District on which the project is located and will be made available to the contractor, as needed, after effective date of the Notice to Proceed. Materials will be available for pick up Monday through Friday, except Federal holidays. The contractor shall coordinate with the designated Contracting Officer’s Representative (COR) 24 hours in advance for arrangements to access materials. The Government will furnish the following listed items:

A. Blank Corner Record cards, Form 7100-52

B. Property Boundary signs #54-2 or #54-7, Land Survey Monument sign #54-9, and #54-3 Bearing Tree Tags and all other signs designated by the COR

C. Treated wood posts and/or metal posts.

D. The Forest Service will make available to the Contractor ownership and corner search and evaluation information in its possession relative to the boundary lines to be maintained. However, any information provided the Contractor by the Forest Service shall be construed as being for informational purposes only and the sole responsibility for its accuracy, completeness, and/or verification rests with the Contractor.

140 – Contractor Furnished Items All labor, equipment, research, supplies, tools, incidentals, supervision, and expertise necessary to accomplish the work, including the following:

A. Waterproof, hardbound field notebooks. Loose leaf books are not acceptable. (Hardbound books are to be delivered to the Forest Service at the end of the contract).

B. Digital and hard copy deliverables of the boundary maintenance information.

C. Red Boundary Mark Paint (solvent based) and paint brushes for application. Nelson “Boundary Mark Paint” or equivalent as approved by the Contracting Officer (C.O.). Aerosol paint is not acceptable.

D. Nuts and bolts, aluminum nails suitable for fastening Forest Service signs.

150 – Definitions Boundary Line. The property boundary line between two established corners, or between meander points on an irregular, natural boundary (such as creeks, rivers) between property corners. This also includes Forest Service administered land boundaries such as wilderness and other designated boundaries.

Dbh. Diameter breast height measured in inches (as applicable to bearing trees only). This the measured diameter of bearings trees rounded to the nearest inch at monumented corners.

Boundary Line Maintenance. Refurbishing previously marked boundary lines to Forest Service Standards.

Consisting of re-painting previously marked trees on the government side of the boundary line, including line trees. This may include property boundary sign replacement as needed.

Corner Maintenance. Refurbishing and perpetuating existing corner markers and corner accessories. This consists of repainting the corner monument shaft, repainting marked bearing trees and repainting any other nearby corner accessories such as witness posts or replacing faded, missing or damaged signs or bearing tree tags.

160 – Work Progression Performance Time: All task orders issued will include contract delivery or performance schedule in terms of specific calendar dates or contract time for completion. To facilitate timely inspections, the contractor shall provide the Government of their proposed operation schedule. The contractor shall notify the Government of schedule changes.

Hours of Work: All work shall be performed during the time period of one hour after sunrise to one hour before sunset, Monday through Friday, unless time changes are approved by the COR or Inspector.

DIVISION 200 – TECHNICAL SPECIFICATIONS

205 – Notification of adjoining property owners In the event that access is needed on adjoining property for boundary maintenance activity, the Contractor shall notify all adjoining land owners of intent to perform boundary line maintenance work before beginning the fieldwork. This notification can be in the form of a standard, prepared letter notifying the adjoining property owners of the intent to perform boundary maintenance work in the area or by personal contact with the landowner.

All significant landowner contacts are to be coordinated, documented and furnished to the Contracting Officer (CO) and the COR.

211 – Practices The posting, painting, signing and monumentation of boundary lines and corners shall be in accordance with the Forest Service Standards.

215 – Bearing Trees and Objects - (see Exhibit 1) Each Forest Service property corner shall be witnessed by at least three (3) healthy bearing trees, four (4) inches diameter breast height (dbh) or greater, which should be located on Government lands. The selected trees should be as near to right angles to the corner position as possible and the tree type correctly determined and noted. If trees four inches or greater dbh are not available, bearing objects (i.e. prominent boulders, other natural features, or identified pipes, etcetera) may be used. The record (existing) bearing trees or objects called for are to be identified and their location relative to the corner monument checked.

Any existing corner accessories or references found in error shall be investigated and corrected in the field and on pertinent documentation. The COR shall be notified as soon as possible of any significant errors on any bearing tree, corner monument or other corner accessory.

All bearing trees shall be blazed above the root crown near ground level with the blaze to face the corner monument and be scribed “BT”. This scribed blaze shall be painted red. All measurements shall be made to the center of the tree and it is advised to drive an aluminum nail in the center of the bearing tree on one side of the tree just above the root crown from which to measure a horizontal distance to the center of the monument. Slope distances are to be avoided. If unavoidable to use a slope distance, this must be clearly indicated in all notes and documents referencing the corner and why it was used.

Bearing trees shall have a six (6) inch red band painted approximately six (6) feet above the ground. On rough bark trees including pines, without damage to the tree, the bark may be scraped smoother in the area of the six (6) inch band so that the paint will apply and adhere better.

A 54-3 bearing tree (BT) sign or tag shall be nailed, just above or below the red band, on each Forest Service bearing tree with the bearing and distance to the corner clearly etched on the tag. The bearing on the tag will read from the tree to the corner. In addition the tract corner number, tract designation, date and ‘posted by’ shall be clearly etched on the tag. Aluminum nails for affixing each BT tag shall be left to protrude approximately one inch to account for future tree growth. Existing bearing trees shall be maintained and any illegible or badly damaged tags shall be replaced with new tags. Unless otherwise directed, only the true corner (not reference or witness monuments) shall be referenced by the BT’s. If, reference monuments are referenced by the BT’s, it must be clear on the BT tags and in all notes that the references are to the R.M. or W.C.

220 - Clearing, Blazing, Posting and Painting of Boundaries - (Refer to Exhibits # 1-5) Clearing of brush and blazing of line reference trees shall not be performed on private property without prior, written, permission of the landowner. Under no circumstance shall fruit, shade or ornamental trees, shrubs or hedges in residential or developed areas be blazed, marked or severed. (See C.205)

A. Brushing and clearing of boundary lines.

a. Clearing of boundary lines should be kept to a minimum within the standards and shall be brushed, limbed and cleared of debris in such a manner as to enable a line of sight between signs, sign posts and other boundary reference marks. The purpose of the brushing is to allow the blazing and signing to be inter-visible while standing on the boundary line. Clearing shall include small trees (less than 2 inches diameter), branches, and brush. Typically the brushing is within a corridor up to two (2) feet on each side of the boundary line. The non-Government side of the line should not be cleared unless permission is obtained, provided that light brushing and cutting of tree branches extending over the line has been clearly indicated as part of the work to be performed in contact letters to adjacent property owners prior to starting field work. (See C.205)

b. All cut debris from brushing is to be scattered on the Government side of the line.

c. The brushing standards may be adjusted as deemed appropriate by the COR

B. Blazes and Hacks.

a. Blaze – New blazes shall be made into the cambium layer of tree not less than 4 feet above ground, and will be two (2) inches to four (4) inches wide and six (6) inches to eight (8) inches long. Older blazes are not to be re-opened but only loose bark removed and the blaze scar painted over again.

b. Hacks – A horizontal cut 4 inches above and below the blaze, penetrating the wood, but not notched.

As shown in attached Exhibit 4 each blaze type may consist of a combination of blazes and hacks together.

C. Line Posting and Boundary Marking.

a. Any line tree encountered should be re-painted and any property boundary sign affixed to the face of a line tree inspected for condition. Replace any badly faded or severely damaged property boundary sign on line trees. New line trees shall not be established during any maintenance work.

Only existing line trees are to be maintained.

b. Boundary line reference trees are within a three (3) foot corridor on the government side of the boundary line. Live trees on the Government side of line shall be quarter blazed four (4) feet to five (5) feet above the ground. No trees beyond three feet of the boundary line shall be blazed or painted or re-painted. All blazes (old and new) are to be painted with red paint on the Government side of the line.

c. Live trees on private land shall be face blazed four (4) feet to five (5) feet above the ground. No tree beyond three feet of the boundary line shall be blazed or painted. Blazing and painting on private land is to be in accordance with prior arrangements with affected property owners.

d. Property Boundary Signs (54-2 sign) shall be placed on the line on treated posts, metal posts, and line trees. The 54-2 sign is used only on National Forest boundary lines and the 54-7 sign is to be used only on National Grassland boundary lines. If the line is along a designated Wilderness boundary, National Forest Wilderness signs shall be used. If there is any confusion of whether a boundary line is along a Wilderness boundary this must be clarified with the COR prior to field work and posting. All sign posts set on the actual boundary line are to be set within one foot of the actual line. The entire post shall be painted red and placed firmly, at least two feet, in the ground and be visually plumb. In most situations, during standard maintenance work, there should be no new posts set. Only the refurbishment and re-painting of previously set posts.

Location of 54-2 (or 54-7) signs:

A. Set at each monumented corner, as a guard post, with attached sign facing private land and bisecting the angle of the intersecting property lines.

B. Set on the boundary line at least 50 feet from each corner, but no more than 100 feet from each corner.

C. Set inter-visible along the line, but not to exceed 300 feet between signs where feasible.

D. Set at streams, trails, road crossings, and prominent ridge tops.

E. An existing line tree may be substituted for a post except at road crossings. When line trees are used a sign shall be placed on said tree approximately 5 feet above the ground with aluminum nails left protruding at least 1 inch to account for future tree growth.

222 – Boundary Line Maintenance and Corner Maintenance A. The Contractor shall insure that all posts (wood or metal) are secure, plumb and in a serviceable condition. Damaged or deteriorated posts shall be replaced by the contractor. The entire post shall be painted whether previously painted or not.

B. All damaged, faded or otherwise unreadable signs (including BT tags) shall be replaced by the contractor. Any missing signs shall be replaced.

C. All existing blazes shall be scraped of loose bark and material, cleaned and repainted. No existing blazes shall be re-blazed or re-cut into the cambium.

D. Healthy trees that previously were not marked but have subsequently grown and are within three feet of the boundary line and are four (4) inches in diameter or greater, may be blazed and painted as needed to adhere to standard markings herein.

E. Brush along the boundary line shall be cleared and removed in accordance with section C.220. Brush and debris shall be removed within a 6 foot radius around the monuments. Sensitivity to brushing on private property shall be in accordance with section C.220.

F. At least two (2) digital photographs will be shot at each corner, one of the top of the monument and one of a directional view(s) showing the vicinity which will include the monument, delineator post and nearby bearing tree(s) in the view(s). A useable disk or electronic copies of the photos will be provided the Forest Service.

G. Corner Cards – Form 7100-52: One original 7100-52 shall be completed for each corner maintained by the contractor. All information placed on the card shall agree with information in the field books. These 7100-52 cards shall be printed in ink or typed and shall be signed and dated by the contractor and shall become property of the Forest Service. Bearings shown on corner cards shall be stated from the corner to the bearing tree or bearing object. A photocopy will also be provided for each card. Each photocopy will be named with the appropriate Forest Service corner ID indexing system, with front and back of Form 7100- 52 shown on one page. (See Exhibit 2 for sample corner card)

225 – Erroneous Lines and Obliteration of Erroneous Lines 54-2 Property Boundary signs, sign posts, or previously blazed and painted trees and other evidence of Government line marking which are not on the recognizable boundary line shall be reported immediately to the COR. Should the contractor encounter any confusing marks or lines, including evidence of possible encroachments or a contested line by an adjoining landowner will stop work immediately on that line and report the situation as soon as possible to the COR. Separate work orders may be issued for the obliteration of lines if required. A written report and any pertinent notes disclosing the erroneous line markings relationship to the boundary line shall be provided to the Forest Service and included in the applicable field notebook.

240 – Boundary Conflicts The COR will inform the Contractor when issuing a delivery order of any known conflicts along any of the lines to be surveyed.

In cases where disputed boundaries become impossible to mark because of hostile adjoining landowners, such lines and cases are to be reported to the COR. If the case is settled prior to completion of the contract work order, the Contractor will mark the line according to these specifications.

DIVISION 300 – INSPECTION AND ACCEPTANCE

305 – Quality Control The Contractor has sole responsibility for maintaining quality control for all aspects of work performed under this contract.

The Contractor will furnish a written plan of quality control procedures to the COR prior to a Notice to Proceed being issued.

310 – Inspections The COR or his/her designated Inspector may make periodic inspections on each project as work progresses.

320 – Acceptance No final approval of any project will be granted until all items specified are delivered to the Contracting Officer’s Representative and determined to fulfill all specifications, terms and conditions of this contract.

In a random minimum sample of ten percent, one hundred percent of the work must fulfill all specifications; otherwise the Contractor will be required to redo all of the work.

DIVISION 400 – MEASUREMENT AND PAYMENT

410 – Measurement All measurements for computational and payment purposes will be as follows:

a) Boundary Line Maintained - This will be the straight line record distance between two successive property corners, or the record distance along the meander line of irregular boundaries, as computed from government deeds or record information.

b) Standard Corner Maintenance (including any Witness Corners or Reference Monuments maintained) – Quantify the number of corners for payment by total number of Forest Service boundary corners actually maintained.

420 – Unit of Computation Payment of items in the Schedule for which the unit is defined as per mile will be paid per final unit of 0.01

mi. as computed from record distance information of lines maintained.

Payment of items defined in the schedule as corners will be paid per each corner monumented or maintained.

No payment will be made by any other unit of measurement.

430 – Payment Payment will be made for items shown on the schedule of items upon completion and acceptance.

Services not applicable to items on the schedule will be negotiated on a per project basis.

Progress payments will be made for completed project areas and/or individual work orders. The Contractor shall submit a dated, signed invoice which shows the work completed listed per tract and by each line segment from corner to corner when requesting payments. Invoice shall clearly show what lines have been maintained and include the number and identification of corners maintained.

Unit Prices includes all research, mileage, and supplies.

SPECIAL CONTRACT REQUIREMENTS

ORDERING PROCEDURES FOR COMPETITIVE TASK ORDERS.

Authorized Ordering Officials: All warranted COs of the USDA Forest Service are authorized to place orders under this contract within the limits of their warrant authority. The amount of any order shall not exceed the maximum order limitation shown elsewhere in this contract.

Task Order Competition: Following contract award, task orders will be competed among awarded contractors. Contractors will be given a fair opportunity to submit a proposal on projects unless the Contracting Officer determines:

• An urgent need exists, and seeking competition would result in unacceptable delay.

• Only one Contractor is capable at the level of quality required because the requirement is unique or highly specialized

• A sole source is in the interest of economy and efficiency as a logical follow-on to an order already competed

• To satisfy contract minimum award obligations.

In the event it becomes necessary to negotiate with one firm on a sole-source basis, the procedures in accordance with FAR 16.505(b)(2)shall be used. Such action will be solely at the Contracting Officer’s discretion and not subject to protest.

Task Order Announcement: When a task is identified for award under this contract, the CO will notify contractors via email only.

The contractors must respond to the CO with their price and ability to accept and complete the order.

The price breakdown shall address all the items listed in the task order, or be presented as a lump sum if that is requested. The Government's payment for the items listed in the Schedule of Items of individual task orders shall constitute full compensation to the Contractor for- (1) Furnishing all labor, equipment, services, materials and expertise; and (2) Performing all operations required to complete the work in conformity with the requirements. The Contractor shall include in the prices for the items listed in the Pricing Schedule all costs for work in the specifications, whether or not specifically listed in the Pricing Schedule. The Contractor may offer the Contracting Officer a voluntary price reduction at any time during the contract period.

Evaluation Method and Procedures. The primary technical and price criteria will vary depending on the unique requirements for each task order. The Contracting Officer may develop evaluation criteria which reflect the instant requirement and contracting environment. Examples of these criteria are past performance on prior task orders under the contract, which includes quality and timeliness, special expertise or other factors the Contracting Officer determines are relevant to award of a particular task order and the unit’s status of achieving small business goals/targets. In making decisions in award of any individual task order, the Government intends to select the most advantageous, responsive, and responsible proposal, price and other factors considered. Each RFQ notice will describe the criteria to be utilized in evaluating task order proposals.

IDIQ contractors are expected to provide good faith proposals in response to task orders issued during the contract’s life. If a contractor is unable to respond due to conflicting commitments or lack of capacity, the ordering official may excuse the contractor from a competition upon specific written request (e-mail is acceptable). Repeated failure to provide a good faith proposal will result in the contract not being renewed and will release the Government from the minimum guarantee obligation.

Proposed preparation costs are at the expense of the offeror and will not be reimbursed.

Award Decision. Whenever possible, award will be made without discussions. If discussions are required, each contractor will be requested to provide a final proposal revision, unless eliminated from discussions through the establishment of a competitive range. Task Order award will be made based on either the best value to the Government or the lowest price, technically acceptable proposal as described in the RFQ notice. The awarded Task Order will be firm fixed-price with a specific number of calendar days. When optional line items are included in the Schedule, the Task Order will specify the number of days after award for exercising the Options.

Task Order Issuance. Task Orders will be issued on an Optional Form 347 and will be submitted by mail, facsimile or electronic commerce; however, the preferred method will be use of email. The Task Order becomes binding when the Contracting Officer signs the order.

Protests. In accordance with FAR 16.505(a)(7), no protest under FAR Subpart 33.1 is authorized in connection with the issuance or proposed issuance of an order under a Task Order Contract except for a protest on the grounds that the order increases the scope, period, or maximum value of the contract.

Ombudsman. If the Contractor believes it was not fairly considered for a particular task order, the Contractor may present the matter to the Contracting Officer. The Contractor may appeal the explanation or decision of the Contracting Officer to the Ombudsman, who is the Head of the Contracting Activity.

The Ombudsman will review the Contractor's complaint, and in coordination with the Contracting Officer, ensure that the Contractor was afforded a fair opportunity to be considered for the Task Order.

CONTRACT TERMS AND CONDITIONS

The following FAR Clauses are incorporated by reference. (See www.acquisition.gov/far for full text.)

52.202-1 Definitions. (NOV 2013) 52.203-3 Gratuities. (APR 1984) 52.203-5 Covenant Against Contingent Fees. (MAY 2014) 52.203-7 Anti-Kickback Procedures. (MAY 2014) 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. (MAY 2014) 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. (OCT 2010) 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights. (APR 2014) 52.204-7 System for Award Management. (JUL 2013) 52.204-13 System for Award Management Maintenance (JUL 2013) 52.212-4 Contract Terms and Conditions - Commercial Items. (MAY 2015) 52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts (SEP 2013) 52.228-14 Irrevocable Letter of Credit. (NOV 2014) 52.228-15 Performance and Payment Bonds – Construction. (OCT 2010) 52.236-2 Differing Site Conditions. (APR 1984) 52.236-3 Site Investigation and Conditions Affecting the Work. (APR 1984) 52.236-5 Material and Workmanship. (APR 1984) 52.236-6 Superintendence by the Contractor. (APR 1984) 52.236-7 Permits and Responsibilities. (NOV 1991) 52.236-8 Other Contracts. (APR 1984) 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

(APR 1984)

52.246-20 Warranty of Services. (MAY 2001) 52.246-21 Warranty of Construction. (MAR 1994) 52.249-4 Termination for Convenience of the Government (Services) (Short Form). (APR 1984) 52.249-8 Default (Fixed-Price Supply and Service). (APR 1984) 52.253-1 Computer Generated Forms. (JAN 1991)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders

- Commercial Items. (JAN 2017)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Public Laws 108-77 and

108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] http://www.acquisition.gov/far https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1158787 https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1146366 https://www.acquisition.gov/sites/default/files/current/far/html/52_233_240.html#wp1113329 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+1665+30++%2831%29%20%20AND%20%28%2831%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_233_240.html#wp1113344 http://uscode.house.gov/

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate

I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

_X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of

2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct

2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul

2013) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C.

657a).

__ (ii) Alternate I (Nov 2011) of 52.219-3.

__ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (JAN 2011) of 52.219-4.

__ (13) [Reserved] _X_ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

__ (ii) Alternate I (Nov 2011).

__ (iii) Alternate II (Nov 2011).

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Nov 2016) of 52.219-9.

__ (v) Alternate IV (Nov 2016) of 52.219-9.

_X_ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011)

(15 U.S.C. 657 f).

__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1137622 http://uscode.house.gov/ http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1141983 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1144881 https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1141649 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1151163 https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html#wp1151299 https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1140926 https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html#wp1145644 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135955 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135955 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135970 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1135970 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136004 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136017 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136032 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136058 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136174 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136175 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136186 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1136387 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1139913 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged

Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business

Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X_ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Oct 2016) (E.O.

13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

_X_ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

_X_ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

_X_ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

_X_ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec

2010) (E.O. 13496).

_X_ (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (34) 52.222-54, Employment Eligibility Verification (OCT 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017;

applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).

Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, GSA, DoD and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.

__ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016).

__ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated

Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (41)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and

13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).

__ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1144950 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html#wp1144420 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147479 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147630 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147656 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1147711 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1158632 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1162802 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+2+78++%2829%29%20%20AND%20%28%2829%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1148123 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1160019 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1151848 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1151848 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1156645 https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2022_18.html#wp1089948 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1169011 https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html#wp1169137 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168892 http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168892 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t41t42+250+1286++%2842%29%20%20AND%20%28%2842%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168917 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168928 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168933 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1168933 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1194330 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1194330 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1194323 https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html#wp1179078

(E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG

2011) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

__ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

__ (ii) Alternate I…