AG67T0S160032-McKelvieAdminSiteRehabv2.docx

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

AG-67T0-S-16-0032

2. TYPE OF SOLICITATION

|_| SEALED BID (IFB)

|X| NEGOTIATED (RFP)

3. DATE ISSUED

08/19/2016

PAGE OF PAGES

IMPORTANT - The “offer” section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

5. REQUISITION/PURCHASE REQUEST NO.

6. PROJECT NO.

USDA FOREST SERVICE

R2, AQM NT-RMAST

1019 N FIFTH ST

CUSTER SD 57730-8214

(605) 673-9200

ATTN: BRENDA ANDERSON

Brenda Anderson B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

(605) 673-9323

SOLICITATION

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder.”

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date):

The project consists of various improvements including architectural, structural, mechanical, plumbing, and electrical system upgrades to create a living quarters within an existing office building. The project also includes the decommissioning of 5 buildings and rehabilitation of two ancillary buildings. The work will be on the Nebraska National Forests & Grasslands at the McKelvie Administrative Site of the Bessey Ranger District, located approximately 35 miles southwest of Valentine, Nebraska. The contractor shall provide any and all labor, equipment, supplies, services, permits, licensing, supervision, workman’s compensation, unemployment insurance, and transportation to accomplish all work necessary for project.

Price Range: The Government's estimate is: below $400,000.

To be eligible for award under this contract, you must be actively registered in the System for Award Management (SAM.gov) – this is a free service – you do not need to pay to register in this system. If your registration is not active, you will not be considered for award.

11. The Contractor shall begin performance within 10 calendar days and complete it within 120 calendar days after receiving |_| award, |X| notice to proceed. This performance period is |X| mandatory, |_| negotiable.

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If “YES,” indicate within how many calendar days after award in Item 12B.)

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code)

15. TELEPHONE NO. (Include area code)

CODE FACILITY CODE

17. The offeror agrees to perform the work at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print)

20B. SIGNATURE

20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT

23. ACCOUNTING AND APPROPRIATION DATA

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print) 31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE

30C. DATE

31B. UNITED STATES OF AMERICA

BY

31C. AWARD DATE

AG-67T0-S-16-0032

McKelvie Administrative Site Rehabilitation and Decommission Nebraska National Forests and Grasslands

PART I—THE SCHEDULE

SECTION B--SUPPLIES OR SERVICES AND PRICES/COSTS

SCHEDULE OF ITEMS

B.1 SCHEDULE OF ITEMS

Proposals shall be valid for 60 days after the date of receipt for the solicitation. If additional time is needed, an extension will be requested. Refer to Section L for instructions on preparing your proposal and pricing.

B.2 Notes:

1. Unit prices prevail.

2. All Contractors must be registered in the System for Award Management (https:://SAM.gov) to be eligible for award under this soliciation. If not registered by time of proposal evaluations, you will be found non-responsive. This is a free service.

3. Payment for bond premiums shall not be in addition to the contract price. Include bond premiums under 151.01 Mobilization. Reference FAR 52.232-5 Payments under Fixed-Price Construction Contracts.

4. Unit Definitions:

· AQ – Actual Quantity

· CY – Cubic Yard

· DH- Mile

· DQ – Design Quantity

· EA- Each

· FT – Foot

· GA - Gallon

· LB - Pound

· LF – Linear Foot

· LSQ, LS – Lump Sum Quantity

· MGA – Thousand gallons

· SY – Square Yard

· TN – Net Ton (2000 LB) Non Discrimination Statement The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means of communication of program information (Braille, large print, audiotape, ect.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint, write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C 20250-9410, or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer.

B.3 Breakdown of Schedule of Items McKelvie Admin Site Rehad and Decommissioning

Base Items

Sub-total– Base Items

Optional Items

Sub-total Optional Items

Total of all Base and Optional Items

SECTION C – DESCRIPTION/ SPECIFICATIONS/STATEMENTOF WORK

C.1 Scope of Contract The project consists of various improvements including architectural, structural, mechanical, plumbing, and electrical system upgrades to create a living quarters within an existing office building. The project also includes the decommissioning of 5 buildings and rehabilitation of two ancillary buildings.

C.2 Project Location The work will be on the Nebraska National Forests & Grasslands at the McKelvie Administrative Site of the Bessey Ranger District, located approximately 35 miles southwest of Valentine, Nebraska. Cherry County Nebraska C.3 Contract Definitions.

C.3.1 Biobased Products: A product determined by the Secretary of Agriculture(USDA) to be a commercial or industrial product (other than food or feed) that is composed, in whole or in significant part, of biological products or renewable domestic agricultural materials (including plant, animal, and marine materials) or forestry materials. Information on biobased/biopreferred products can be found at http://www.usda.gov/biopreferred. In addition to the biobased products designated by the U.S. Department of Agriculture in the BioPreferred Program, the Contractor is encouraged to use other biobased products. The Contractor shall comply with the provision at FAR 52.223-1, Biobased Product Certification. The Contractor shall comply with the clause at FAR 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

C.3.2 Contract time. See Period of Performance.

C.3.3 Contracting Officer (CO). Individual with authority to bind the government with their signature on the contract.

C.3.4 Contracting Officer Representative (COR).Individual(s) designated to act on the behalf of the CO within the delegation given them in writing.

C.3.5 Period of performance (also Performance period or Contract time). All calendar days allowed for completion of contract work. Includes all days of the week including weekends and holidays.

C.3.6 Quality Assurance. Those actions taken by the government to check goods or services to determine that they meet the requirements of the SOW.

C.3.7 Quality Control. Those actions taken by a contractor to control the production of goods or services so that they will meet the requirements of the SOW. Refer to Inspection and Acceptance 52.246-4 and Contractors Quality Control Plan as described in Section E.

C.3.8 Quality Control Plan. Contractors plan for self-monitoring work prior to Government inspection and acceptance. See Section E and FAR Clause 52.246-12.

C.3.9 Random Sampling. A method of looking at a few individual items in a lot to determine the quality of that lot against a standard.

C.3.10 Standard. An acknowledged measure of comparison.

C.3.1 Technical Definitions. See Specifications and Drawings.

C-4 Government-Furnished Property

None

C.5 Contractor Furnished Property and Services Furnish all necessary labor, supervision, transportation, equipment, materials not specifically identified to be Government furnished, and incidentals nessary to provide work in accordance with the specifications, supplemental specifications, wage rates, terms and conditions.

C.6 Sustainable Products The Contractor shall comply with Section 9002 of the Farm Security and Rural Investment Act of 2002 (FSRIA), Executive Order (EO) 13423, “Strengthening Federal Environmental, Energy, and Transportation Management,” and the Federal Acquisition Regulation to provide biobased products.

The Contractor shall utilize products and material made from biobased materials (e.g. biobased greases, biobased hydraulic fluids, biobased absorbents) to the maximum extent possible without jeopardizing the intended end use or detracting from the overall quality delivered to the end user. All supplies and materials shall be of a type and quality that conform to applicable Federal specifications and standards. All supplies and materials to be used in the performance of work described herein are subject to the approval of the Contracting Officer.

C.6.1 In the performance of this contract, the Contractor shall make maximum use of biobased oils and lubricants that are designated by the United States Department of Agriculture unless the product cannot be acquired:

· Competitively within a time frame providing for compliance with the contract performance schedule;

· Meeting contract performance requirements; or

· At a reasonable price.

· Information about this requirement and these products is available at http://sftool.gov/green-products/1/construction-materials C.6.2 The Federal Acquisition Regulation (FAR) requires Contractors to report the purchase of biobased products under service and construction contracts during the previous Government fiscal year (October 1 thru September 30) and to submit this report no later than:

1. October 31 of each year during contract performance; and

2. At the end of contract performance.

3. Information about this requirement is available at http://www.biopreferred.gov/FARReporting/FARReporting.xhtml C.6.3 Sustainable products identified for this solicitation:

The following is an example list of products that may be used in this contract for operations and maintenance for which biobased products are available. The list is not all inclusive. It is desirable that vendors be able to supply the greatest number of biobased products listed meeting the health and environmental specifications.

C.6.3.1 Diesel Fuel Additives

(1) Any substance, other than one composed solely of carbon and/or hydrogen, that is intentionally added to diesel fuel (including any added to a motor vehicle's fuel system) and that is not intentionally removed prior to sale or use.

(2) Neat biodiesel, also referred to as B100, when used as an additive. Diesel fuel additive does not mean neat biodiesel when used as a fuel or blended biodiesel fuel (e.g., B20). 90% - Minimum Biobased Content.

C.6.3.2 Hydraulic Fluids - Mobile Equipment Hydraulic fluids formulated for general use in nonstationary equipment, such as tractors, end loaders, or backhoes. 44% - Minimum Biobased Content.

C.6.3.3 Fuel Conditioners Products formulated to improve the performance and efficiency of engines by providing benefits such as removing accumulated deposits, increasing lubricity, removing moisture, increasing the cetane number, and/or preventing microbial growths within the fuel system. 64% - Minimum Biobased Content.

C.6.3.4 Erosion Control Woven or non-woven fiber materials manufactured for use on construction, demolition, or other sites to prevent wind or water erosion of loose earth surfaces, which may be combined with seed and/or fertilizer to promote growth. 77% - Minimum Biobased Content.

C.6.4 EPA Designated Products:

Plastic trash bags, printer ribbons, toner cartridges, print & writing papers, Traffic Barricades, Traffic Cones, Engine Coolants, Rebuilt Vehicular Parts, Re-refined lubricating oils, retread tires, manual grade strapping, signage, sorbents.

C-7 Specifications The Sepcifications and Drawings are attached in speperate documents – a copy of the table of contents is provided for reference to the attached documents.

SECTION D -- PACKAGING AND MARKING

{No clauses in this section.}

SECTION E -- INSPECTION AND ACCEPTANCE

E-1. FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://acquisition.gov/far/

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES

SECTION F - DELIVERIES OR PERFORMANCE

F.1 . Suspensions for Other Than Government’s Convenience The Contracting Officer may issue orders to suspend the work wholly or in part for such period of time as deemed necessary because of: (1) Weather or ground conditions when further prosecution of the work might cause environmental or resource damage to the project, access roads to the project, or adjacent property. Such action would include but not be limited to instances such as siltation of streams, damage to access roads, rutting of project roads which causes otherwise suitable soils to become muddy or unsuitable; or (2) Failure of the Contractor to comply with Specifications such as but not limited to placement of frozen material in fills, placing of asphalts at temperatures lower than those specified, performing work prior to prerequisite approvals, operating equipment not meeting fire requirements, or when conditions exist which do not meet safety requirements. Whether or not a suspend work notice is issued, the Contractor shall be responsible for correcting any damage caused by his/her operation, whether inside or outside project limits, at no cost to the Government. Such suspensions shall not be considered as suspensions for the Convenience of the Government under FAR 52.242-14, Suspension of Work, and shall not qualify for equitable adjustment.

F-2. FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://acquisition.gov/far/

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES

F.3 FAR 52.211-10 COMMENCEMENT PROSECUTION, AND COMPLETION OF WORK (APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 120 calendar days. The time stated for completion shall include final cleanup of the premises.

F.4 SCHEDULES FOR CONTRACTS

If Contractor's progress falls behind progress work schedule, the Contractor shall take such action as necessary to improve his progress; in addition, the Contracting Officer may require Contractor to submit a revised schedule and proposed plan of work to ensure completion of the work within the time(s) set forth in the contract.

Contractor shall schedule work to allow enough time for final inspections and any possible reworks to be completed by the contract end date.

SECTION G -- CONTRACT ADMINISTRATION DATA

G.1 PAYMENT

Payment will be made for identified line items meeting contract specifications. Progress payment(s) may be authorized by the Contracting Officer.

G.1.1 Construction work under this contract incorporates the Davis Bacon Wage Rates for Construction. Weekly payrolls are mandatory and must be turned into the Contracting Officer Representative for review and approval. Construction invoices will not be processed until acceptable payrolls have been received.

G.1.2 Invoice Submittals A signed payment certification must be uploaded with a breakdown of your invoice for payment to be authorized. See Attachment 1 in Section J.

The "Submit Invoice-to" address for USDA orders is the Department of Treasury's Invoice Processing Platform (IPP). The contractor must follow the instructions on how to register and submit invoices via IPP as prescribed. All invoices are to be submitted via the electronic Invoice Processing Platform. This is a mandatory requirement initiated by the U.S. Department of Treasury and you can find more information at this website https://www.ipp.gov/index.htm. Please make sure that your company has registered at https://www.ipp.gov/vendors/enrollment-vendors.htm to establish your account.

If you have questions, contact your Contracting Officer.

G.1.3 Final payment Before final acceptance, all areas occupied by the Contractor in connection with the work shall be cleaned of all contractor’s rubbish, excess materials, temporary structures, and equipment, and all parts of the work area shall be left in a neat and presentable condition.

A Contract release shall be submitted with the final invoice.

G.2 UNACCEPTABLE WORK.

G.2.1 When the Contractor provides unacceptable work, the Government may:

(i) Accept the work at a reduced price.

(ii) Require the area to be reworked at no additional expense to the Government, or

(iii) Reject the work in its entirety. If the work quality is unacceptable, the Contractor’s right to proceed is subject to termination for default clause.

G.2.2 The Government will permit the Contractor to rework an area only if the existing deficiencies can be corrected.

G.2.3 Any Government quality assurance assessment needed due to the Contractor reworking an area, either at the Contractor's request or because of unacceptable work, will be at the Contractor's expense. The Contractor may be assessed actual damages that are incurred while administering the contract during the rework.

G.2.5. The Government shall document unacceptable work quality in the performance assessment.

G.3 DAMAGES

The charge Government-furnished property that is not returned, or returned in a non-usable condition, is as listed in Section C.4.

The table below lists charge rates for Government re-inspection of work.

*Mileage reimbursement rate in effect January 1, 2016 is $.54 per mile. Mileage rates change periodically and the most current mileage rates for assessed damages at the time will be used. Most current mileage rates can be found at the General Services Administration website http://www.gsa.gov/portal/category/104715.

G.4 DESIGNATION OF GOVERNMENT REPRESENTATIVE

G.4.1 The Contracting Officer will designate a Contracting Officer's Representative (COR) at the time of contract award.

The COR is responsible for administering the performance of work under this contract. In no event, however, will any understanding, agreement, modification, change order, or other matter deviating from the terms of this contract be effective or binding upon the Government unless formalized by proper contractual documents executed by the Contracting Officer prior to completion of the contract.

The Contracting Officer should be informed as soon as possible of any actions or inactions by the Contractor or the Government which will change the required delivery or completion times stated in the contract, and the contract will be modified accordingly.

On all matters that pertain to the contract terms the Contractor must communicate with the Contracting Officer. Whenever, in the opinion of the Contractor, the COR requests effort outside the scope of the contract, the Contractor should so advise the COR. If the COR persists and there still exists a disagreement as to proper contractual coverage, the Contracting Officer should be notified immediately, preferably in writing if time permits. Proceeding with work without proper contractual coverage could result in nonpayment or necessitate submittal of a contract claim.

G.5 CONTRACTOR’S REPRESENTATIVES

At all times during performance of this contract and until work is completed and accepted, the Contractor shall directly superintend the work or assign and have on the worksite competent representatives who are satisfactory to the CO and has authority to act for the Contractor.

All work will be performed in an organized and systematic manner.

The Government may, at its option, suspend work with full count of contract time continuing, if the Contractor fails to provide a contract representatives (1) conversant in the English language and (2) able to read and understand the contract.

G-6 NOTIFICATION OF SUBCONTRACTING

The Contractor shall promptly notify the Contracting Officer upon entering into any subcontract arrangement. The subcontractor shall have the experience and be equipped for such work. Subcontractor documentation will be submitted on a completed SF-1142 for construction.

Subcontracting any portion of the contract shall not relieve the Prime Contractor of any responsibility under this contract. Any subcontract agreement shall contain all terms and conditions required on the SF-1142.

G-7 NOTICE TO PROCEED

A Notice to Proceed will be issued in writing by the Contracting Officer. No work shall begin until receipt of this notice. Supplies should not be purchased prior to the Notice to Proceed or the Contractor will not be reimbursed in the case of a Termination of the contract. Contract time shall commence on the day indicated on the Notice to Proceed.

SECTION H – SPECIAL CONTRACT REQUIRMENTS

H.1 EMERGENCY CONTROL - FIRE PLAN

The Great Plains Dispatch Center includes public and private land in the Black Hills in South Dakota, in east/northeastern Wyoming and western Nebraska.

Local, State and Federal agencies have combined fire restriction information on one website at: www.blackhillsfirerestrictions.com. Great Plains Dispatch Center 1(800) 275-4955, Public Fire (605) 923-8868.

Great Plains Fire Information/PIO Contact Information:

· Phone Number - (605) 923-8868

· Email - greatplainsfireinfo@gmail.com

· Blog - http://gpfireinfo.blogspot.com/

· Twitter - @GPFireInfo It is important to note that people who wish to receive fire information within the Great Plains initial attack zone, should subscribe to the blog, follow the Twitter account or subscribe to the Atom Feed (available on blog) as news releases are no longer sent out via the Google e-mail account.

If a post has been made on the blog, one automatic e-mail a day will be sent to those who subscribe with all of the daily fire updates. The blog link may also be checked anytime of the day to see any updates that have been made on initial attack fires.

To subscribe to the blog:

1. Click on http://gpfireinfo.blogspot.com/

1. In the “Follow by E-mail” box on the right side of the webpage, enter your e-mail address that you wish to receive updates at.

1. Hit “Submit”

1. A pop-up box will appear asking you to enter a word in a box to verify that your e-mail is not spam.

1. Enter the word that is shown and then click “Complete Subscription Request”

1. Done For questions, please call the PIO phone number at (605) 923-8868 or e-mail greatplainsfireinfo@gmail.com.

1. Tools and equipment.

The Contractor shall furnish and maintain in a serviceable condition one shovel, size O or larger, for each employee working in the project area. The shovels may be stored in the employees private vehicle or the contractor's vehicles, but must be readily available to each employee while in the project area.

For each yarder, loader, jammer, chipper, crawler tractor, skidder, hauling truck, portable welder, or comparable type equipment, the Contractor shall furnish one shovel, size O or larger, attached to each unit and one two and one-half pound or larger dry chemical or four pound or larger carbon dioxide type fire extinguisher attached to each unit.

For each power saw, soil auger, portable pump, or like powered equipment, the Contractor shall furnish one shovel, size 0 or larger, and one dry chemical fire extinguisher, 8 ounce or larger, immediately available to the operator of the equipment. The fire extinguisher shall be with the operator of the equipment; the shovel may be with the fuel can used to refuel the equipment.

Refueling of the equipment shall be done in an area cleared and void of flammable materials. Power saws shall be moved from the spot of refueling before starting.

(b) Fire Prevention.

The Contractor shall immediately notify the Government of any fires sighted on or in the vicinity of the work site. The Contractor may be held liable for all damages and for all costs incurred by the Government for labor, subsistence, equipment, supplies, and transportation deemed necessary to control or suppress a fire set or caused by the Contractor or the Contractor’s agents or employees.

Blasting - Advance approval in writing is required from the District Ranger. The use of fuses shall not be permitted, except near power lines where the danger of accidental detonation is present. Use of prima cord will not be allowed in clearing operations where flammable materials are present. A watchman will remain on site for at least one hour after detonation in areas of blasting where flammable fuels are present. Explosives will be stored at all times in a locked box marked "Explosives." All Federal, State, and local laws concerning the use and storage of explosives shall be followed.

Fire Orders/moratoriums – Any fire order issued during the contract will become a requirement of the contract.

Gas and Oil Use and Storage - Gasoline will be stored and transported only in metal containers with tight caps or seals. Gas and oil drum storage areas will be cleared of all flammable material for a distance of 50 feet around the drums. Storage areas will be posted with "No Smoking" signs. Oil filters, oil cans, oily rags, etc., will be removed from the project area and discarded in proper waste disposal receptacles or sites.

Open Fires - In accordance with State and local regulations.

Pursuant to 16 USC 551 and 36 CFR 261.50 (a) and (b) the following is prohibited on each National Forest or National Grasslands in the Rocky Mountain Region:

Operating or using any internal or external combustion engine on any timber, brush or grass covered land, including trails traversing such land, without a spark arrester, maintained in effective working order, meeting either (i) Department of Agriculture, Forest Service Standard 5100-1a; or (ii) the 80 percent efficiency level determined according to the appropriate Society of Automotive Engineers (SAE) recommended Practices J335 and J350.

Violation of this regulation and the general prohibitions of 16 USC 551 and 18 USC 3559 and 3571 (b) (6) is punishable as a Class B misdemeanor, by a fine of not more than $5,000.00 for an individual or $10,000.00 for an organication or imprisonment for not more than 6 months, or both.

Smoking - Smoking is prohibited while operating tractors or open-type vehicles, or while walking or working in an area with flammable fuels.

Welding - All flammable materials will be cleared for a minimum distance of 10 feet around any welding operation. Fire extinguishers and fire tools are required as shown in Section B-1(b).

H.2 Safety Plan

a. The Contractor shall provide a copy of their safety plan at the pre-work meeting. This copy of the Safety plan shall be kept in the contract folder for OSHA’s review.

b. The Safety Plan should be available to all employees and subcontractors working on the contract.

c. The Safety Plan should cover at a minimum:

i. Safety briefings covering the work area, equipment being used, and any special considerations for the work under the contract. The Contractor shall identify the specific conditions that the contractor considers a hazard. The Contractor shall update their safety plan which addresses the specific hazards of the work site.

ii. Personal Protective Equipment required for the work under the contract.

iii. Identify appropriate OSHA requirements for the type of work under the contract.

iv. Weather considerations for the time of year of the contract.

v. Communication issues and locations of the nearest medical facilities.

vi. Name and point of contact information of supervisor responsible for enforcing Safety Plan.

vii. Name, position title and point of contact information of company executive responsible for approving the Safety Plan.

viii. Specific contingency plans for emergencies such as medical, fire, hazard material spills and any other contract assessed hazard prevention and abatement requirement needs that apply to this project.

H.3 OIL AND HAZARDOUS MATERIALS SPILL CONTINGENCY PLAN

If Contractor maintains storage facilities for oil or oil products on National Forest lands, Contractor shall take appropriate preventative measures to ensure that any spill of such oil or oil products does not enter any stream or other waters of the United States or any of the individual States.

Contractor shall prepare a Spill Prevention Control and Countermeasures Plan for oil or oil products storage.

Contractor will have an oil/oil products spill remediation kit on site at all times. Kit contents will include: 20 – 15”x19” Pads, 3 – 3”x4’ socks, 5 Disposable bags & ties, 1 pair Nitrile gloves, 1 pair of Safety Goggles, 1 clear bag w/ zipper for packaging.

Contractor shall notify the Contracting Officer Representative, Contracting Officer, and appropriate agencies of all spills in the amount of five gallons or more of oil or oil products on National Forest lands that are caused by Contractor’s employees, equipment, agents, contractors, subcontractors, or their employees or agents, directly or indirectly, as a result of Contractor’s operations. Contractor will take whatever initial action may be safely accomplished to contain all spills.

H.4 HAZARDOUS SUBSTANCES:

Contractor shall notify the National Response Center and Contracting Officer of all releases of reportable quantities of hazardous substances on National Forest lands that are caused by Contractor’s employees, equipment, agents, contractors, subcontractors, or their employees or

Selective Demo

1) Site Plan

2) Demo Plan Section 024119, 1.4

Misc. Rough Carpentry

1) Data for wood preservative treatment

2) Data for fire-retardant treatment Section 061000, 1.2

Misc. Rough Carpentry A.) Material Certificates B.) Evaluation Reports

Sheathing A) Product Data B) Research/Evaluation Reports

Interior Architectural Woodwork A.) Product Data B.) Shop Drawings C.) Samples D.) Woodwork Quality Standard Compliance Certificates

Thermal Insulation A) Product Data

Thermal Insulation

1) Product test results

2) Research/evaluation reports

Asphalt Shingles A) Product Data

Joint Sealants A) Product Data B) Samples C) Joint-Sealant Schedule

Joint Sealants A) Product test reports B) Field-adhesion test reports C) Warranties

Flush Wood Doors A) Product Data B) Samples

Door Hardware A) Proposed hardware list B) Manufacturer’s catalogs, certifications, or other material

Gypsum Board A) Product Data B) Samples

1. Trim Accessories

2. Textured Finishes

Resilient Tile Flooring A) Product Data B) Shop Drawings C) Samples

Resilient Tile Flooring A) Maintenance Datq

Tile Carpeting A) Product Data B) Shop Drawing C) Samples

Tile Carpeting A) Product test results B) Sample warranty

Tile Carpeting A) Maintenance Data B) Furnish Extra Material

Interior Painting A) Product Data B) Samples C) Product List

Interior Painting A) Paint

Staining and Transparent Finishing A) Product Data B) Samples C) Product List

Staining and Transparent Finishing A) Furnish Extra Materials

a. Stains and Transparent Finishes

Toilet, Bath, and Laundry Accessories A) Product Data B) Product Schedule

a. Identify products

Toilet, Bath, and Laundry Accessories A) Warranty

Toilet, Bath, and Laundry Accessories A) Maintenance Data

Fire Extinguishers A) Product Data

Fire Extinguishers A) Warranty

Fire Extinguishers A) Operation and Maintenance Data B) Warranty

Window Wells A) Shop Drawings B) Product Data C) Selection Samples

Fire Suppression Materials And Methods A) Submittal Procedures

a. Product Data

b. Shop Drawings

c. Calculations B) Delegated-Design C) Qualification Data D) Sprinkler Piping Drawings

Fire Suppression Materials And Methods A) Submittal Procedures

1. Provide Extra Materials

2. Operation and Maintenance Data

3. Furnish Final As-Built Drawings

Common Work Results For Plumbing

1) Submit Manufacturer’s Literature

Common Work Results For Plumbing

1) Operation and Maintenance Data

2) Furnish Valve Schedules

Hangers and Supports for Plumbing Piping and Equipment

1) Submit Manufacturer’s Literature

Plumbing Insulation

1) Submit Manufacture’s Literature

Domestic Water Piping A) Submittal Procedures

1. Product Data B) Closeout Submittals

1. Operation and Maintenance Data

2. Field Quality Test Reports

Sanitary Waste and Vent Piping A) Submittal Procedures

1. Product Data B) Closeout Submittal

1. Field Quality Test Reports

Plumbing Fixtures A) Submittal Procedures

1. Manufacturer’s Product Literature B) Sample Warranties

Plumbing Fixtures A) Closeout Procedures and Operation and Maintenance Data

1. Manufacturer’s Operation and Maintenance Data

2. Test Results

3. Spare Parts

4. Warranties

Mechanical Materials And Methods A) Product Submittals B) Submit Operation and Maintenance Data

Registers, Grilles, and Louvers

1. Submittal Procedures

a. Product Data

b. Color Samples

2. Closeout Submittals

a. Closeout Procedure

a. Spare Parts

Air handling Units A) Submittal Procedures B) Product Data C) Sample Warranty

Air handling Units A. Closeout Procedures

Heat Pumps A. Product Submittals B. Submit Literature C. Sample Warranties

Heat Pumps A. Operation and Maintenance Data B. Field Quality Test Reports and Warranty Info C. Warranties

Electrical Material And Methods A. Submittal Procedures

1. Product Data

Grounding and Bonding A. Submittal Procedures

1. Product Data B. Closeout Submittals

1. Field Quality-Control Test Reports

Panelboards

1) Product Data

2) Shop Drawings

3) Closeout Submittals

Lighting A. Submittal Procedures

1. Product Data

2. Sample Warranties B) Closeout Submittals

Fire Detection Material And Methods

1. Submittal Procedures

1. Product Data

2. Sample Warranties

1. Closeout Submittals

a. Field Quality-Control Tests

b. Operation and Maintenance Data

c. Warranty Info

Trenching, Bedding, and Backfill For Utilities A. Submit for approvals

Aggregate Base Course A. Division 1 Section Submittals B. Copies Of Certified Weight Tickets C. Certification From Commercial Source D. Submit All Test Results

Cement Concrete Pavement A. Design Mix B. Material Certificates C. Jointing Plan and Materials

Water Distribution A. Shop Drawings B. Product Data C. Manufacturer’s Instructions D. Notice of Decommissioning E. Record Drawings

agents, directly or indirectly, as a result of Contractor’s operations, in accordance with 40 CFR 302. See section J for reporting requirements and documentation.

H.5 PRODUCT SUBSTITUTION

Any modification of other items, designs, materials, products or equipment (including Government-furnished property), made necessary because of a substitution, will be the responsibility of the Contractor without adjustment in contract price or time. The Contracting Officer's approval of any substitute will not affect the Contractor's responsibility for such modification. Any and all substitutions will be requested by the Contractor after award of the contract has been made. No approvals will be made prior to award.

H.6 CONTRACTOR PERFORMANCE ASSESSMENT SYSTEM (CPARS) PROGRAM

This contract may be subject to reporting in the Contractor Performance Assessment System (CPARS) program. Contractors will need to provide a point of contact with email address upon award of contract. Contractors are encouraged to take training and register in this program. Information can be found at:

· Contractor Overview (1.5 hours). View Schedule - This training will give the student an understanding of the Contractor Representative and Contractor Corporate Senior Management levels of access, the policies and regulations governing ACASS/CCASS and CPARS, and the electronic workflow with particular attention to the Contractor comment function.

· Target Audience: This session is specifically targeted to Contractor users who provide Past Performance Evaluation comments or who manage the ACASS/CCASS and CPARS process for their company.

Online course: https://www.cpars.gov/ H.7 Submittals, Shop Drawings, Material Certifications and Testing Reports List of Required Submittals shall include, but are not limited to, the following:

H-8. CONTRACTOR’S USE OF EXISTING ROADS

The Contractor is authorized to use roads in the immediate construction project area for performance of work under this contract. The authorization is limited to roads necessary for direct access between the construction area and storage sites, disposal areas, and other work areas designated in the contract.

The roads authorized for use will be subject to the following general conditions:

(1) State laws governing traffic rules and equipment requirements on State and County Highways.

(2) Federal Regulations contained in 36 CFR 261.12. These regulations prohibit use in excess of State Codes for weight and size, damaging a road while using it, and blocking a road open to use by others.

Load Limits --All vehicles and equipment shall not exceed State legal highway loads and widths or posted limits without valid State and Forest Service overload, overwidth permits. Forest Service overload permits for this project may be obtained from the Forest Engineer.

(3) Federal Regulations contained in 36 CFR 261.54 as applied to the area by an order issued under 36 CFR 261.50. These regulations authorized the Forest Service, as a sovereign act, to issue additional restrictions and closures any time conditions warrant. Such closures will be in addition to those shown in the current Road Rules Document and will be posted on the road.

The Contractor shall be responsible for and perform road maintenance commensurate with his use of Forest Service roads in the construction area.

H-9. TRAFFIC CONTROL

The Contractor shall provide, erect and maintain all necessary barricades, suitable and sufficient lights, danger signals, signs, and other traffic control devices, and shall take all necessary precautions for the protection of the work and safety of the public. Roads closed to traffic shall be protected by effective barricades, and obstructions shall be illuminated during the hours of darkness. Suitable warning signs shall be provided to properly control and direct traffic.

The Contractor shall erect warning signs in advance to any place on the project where operations may interfere with the use of the road or trail by traffic and at all intermediate points where the new work crosses or coincides with an existing road or trail. All road barricades, warning signs, lights, temporary signals, flagman and pilot car operators and equipment, and other protective devices, except for special devices, shall conform with Part VI of the Manual on Uniform Traffic Control Devices for Streets and Highways, published by the Federal Highway Administration and applicable safety codes.

The Contractor shall furnish, erect, maintain, and remove when notified any project identification signs shown on the drawings.

Necessary warning signs and guards shall be posted during blasting operations to safeguard the public.

H.10. UTILITY SERVICES

Contractor use of utilities is detailed in Spec Section 010150 – General Requirements – Part 5.- There will be no charge for these services.

SECTION I -- CONTRACT CLAUSES

I.1 FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.arnet.gov/far/ www.usda.gov/procurement/policy/agar.html

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES