RTN_Solicitation_Oconee_Mowing_and_Cleaning_7_Recreational_Sites_FY16.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

XX PAGE OF PAGES

THIS RFQ IS IS NOT A SMALL BUSINESS SET- ASIDE 1 51

1. REQUEST NO.

AG-435H-S-16-0008

2. DATE ISSUED

04/11/2016

3. REQUISITION/PURCHASE REQUEST NO.

778742

4. CERT. FOR NAT.DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY

Chattahoochee-Oconee National Forest Attn: Francoies Morman 1755 Cleveland HWY Gainesville, GA 30501

6. DELIVER BY (Date)

See Contract Time

5b. FOR INFORMATION CALL (NO COLLECT CALLS) 7. DELIVERY FOB DESTINATION OTHER (See Schedule) NAME

Francoies Morman , CO

Jeff McDonald, David Fowler

TELEPHONE NUMBER X

AREA CODE

NUMBER

297-3072

485-7110 x101 485-7110 x123

9. DESTINATION

a. NAME OF CONSIGNEE

Sec. C - Location & Description 8. TO:

a. NAME b. COMPANY b. STREET ADDRESS

c. STREET ADDRESS c. CITY

d. CITY e. STATE f. ZIP CODE d. STATE e. ZIP CODE

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

05/13/2016 4:00 P.M. EST

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in BLOCK 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

Oconee RD – FY16 Mowing & Cleaning 7 sites Recreational Sites

DUNS#

Please read through the entire solicitation

This solicitation will result in an multiyear option contract

NAICS 561730

Small Business Set

Aside

Please complete

Experience

Questionnaire.

Contractor Must be registered with

SAM.gov prior to award.

LS

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS

c. 30 CALENDAR DAYS

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION a. NAME OF QUOTER

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

c. COUNTY AREA CODE

d. CITY e. STATE f. ZIP CODE c. TITLE (Type or Print) NUMBER

NSN 7540-01-152-8084 18-121 STANDARD FORM 18 (Rev. 6-95)

Previous edition not usable Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

PART I – THE SCHEDULE

SECTION B – SUPPLIES OR SERVICES AND PRICES/COSTS

The following schedule of items is estimated based upon the approximate days to be serviced.

BASE YEAR JULY 1, 2016 THROUGH JUNE 30, 2017

Recreation Site Cleaning

Frequency

Mowing

Frequency

Amount

Swords 2 times weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Redlands 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Dyar Pasture 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Town Creek OHV

Area

1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Roberts Bike Trail 1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Oconee River Rec

Area

2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Scull Shoals None 4 Times Per (GS)

OPTION YEAR 1 - JULY 1, 2017 THROUGH JUNE 30, 2018

Frequency

Mowing

Frequency

Amount

Swords 2 times weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Redlands 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Dyar Pasture 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Town Creek OHV

Area

1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Roberts Bike Trail 1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Oconee River Rec

Area

2 time weekly (SS) 1 time bi-weekly (WS)

OPTION YEAR 2 - JULY 1, 2018 THROUGH JUNE 30, 2019

Frequency

Mowing

Frequency

Amount

Swords 2 times weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Redlands 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Dyar Pasture 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Town Creek OHV

Area

1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Roberts Bike Trail 1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Oconee River Rec

Area

2 time weekly (SS) 1 time bi-weekly (WS)

OPTION YEAR 3 - JULY 1, 2019 THROUGH JUNE 30, 2020

Frequency

Mowing

Frequency

Amount

Swords 2 times weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Redlands 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Dyar Pasture 2 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Town Creek OHV

Area

1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Roberts Bike Trail 1 time weekly (SS) 1 time bi-weekly (WS)

Every 10 Days (GS)

Oconee River Rec

Area

2 time weekly (SS) 1 time bi-weekly (WS)

GS = Growing Season (April-October)

DS = Dormant Season (November-March)

SS = Summer Season (April-October)

WS = Winter Season (November-March)

AG-435H-S-16-0001

Chattahoochee-Oconee National Forest

Recreation site Mowing & Cleaning

WD 15-2133 (Rev.-1) was first posted on www.wdol.gov on 02/02/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-2133

Daniel W. Simms Division of | Revision No.: 1

Director Wage Determinations| Date Of Revision: 01/27/2016

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract

Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Georgia

Area: Georgia Counties of Banks, Barrow, Bartow, Butts, Carroll, Chattooga, Cherokee, Clarke, Clayton, Cobb, Coweta, Dawson, De Kalb, Douglas, Fannin, Fayette, Floyd, Forsyth, Franklin, Fulton, Gilmer, Gordon, Greene, Gwinnett, Habersham, Haralson, Henry, Jackson, Lumpkin, Madison, Morgan, Murray, Newton, Oconee, Oglethorpe, Paulding, Pickens, Polk, Rabun, Rockdale, Spalding, Stephens, Towns, Union, Walton, White, Whitfield

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.40

01012 - Accounting Clerk II 15.04

01013 - Accounting Clerk III 17.24

01020 - Administrative Assistant 26.66

01035 - Court Reporter 20.93

01051 - Data Entry Operator I 13.84

01052 - Data Entry Operator II 15.70

01060 - Dispatcher, Motor Vehicle 19.15

01070 - Document Preparation Clerk 13.16

01090 - Duplicating Machine Operator 13.16

01111 - General Clerk I 13.43

01112 - General Clerk II 14.84

01113 - General Clerk III 16.45

01120 - Housing Referral Assistant 21.85

01141 - Messenger Courier 12.60

01191 - Order Clerk I 13.01

01192 - Order Clerk II 14.80

01261 - Personnel Assistant (Employment) I 15.22

01262 - Personnel Assistant (Employment) II 18.55

01263 - Personnel Assistant (Employment) III 20.90

01270 - Production Control Clerk 21.32

01290 - Rental Clerk 15.21

01300 - Scheduler, Maintenance 16.13

01311 - Secretary I 16.13

01312 - Secretary II 18.05

01313 - Secretary III 20.13

01320 - Service Order Dispatcher 15.87 http://www.wdol.gov/ http://www.dol.gov/whd/govcontracts http://www.dol.gov/whd/govcontracts

01410 - Supply Technician 26.66

01420 - Survey Worker 18.40

01460 - Switchboard Operator/Receptionist 13.41

01531 - Travel Clerk I 14.22

01532 - Travel Clerk II 15.53

01533 - Travel Clerk III 16.73

01611 - Word Processor I 13.25

01612 - Word Processor II 15.21

01613 - Word Processor III 18.30

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 23.36

05010 - Automotive Electrician 21.55

05040 - Automotive Glass Installer 20.18

05070 - Automotive Worker 20.18

05110 - Mobile Equipment Servicer 17.47

05130 - Motor Equipment Metal Mechanic 23.36

05160 - Motor Equipment Metal Worker 20.18

05190 - Motor Vehicle Mechanic 23.36

05220 - Motor Vehicle Mechanic Helper 17.56

05250 - Motor Vehicle Upholstery Worker 19.05

05280 - Motor Vehicle Wrecker 20.18

05310 - Painter, Automotive 21.55

05340 - Radiator Repair Specialist 20.18

05370 - Tire Repairer 13.80

05400 - Transmission Repair Specialist 23.36

07000 - Food Preparation And Service Occupations

07010 - Baker 12.20

07041 - Cook I 11.95

07042 - Cook II 13.58

07070 - Dishwasher 10.24

07130 - Food Service Worker 10.01

07210 - Meat Cutter 13.04

07260 - Waiter/Waitress 8.82

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 17.47

09040 - Furniture Handler 12.05

09080 - Furniture Refinisher 16.23

09090 - Furniture Refinisher Helper 12.55

09110 - Furniture Repairer, Minor 14.76

09130 - Upholsterer 16.23

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 10.14

11060 - Elevator Operator 10.14

11090 - Gardener 15.57

11122 - Housekeeping Aide 10.89

11150 - Janitor 10.89

11210 - Laborer, Grounds Maintenance 11.22

11240 - Maid or Houseman 9.54

11260 - Pruner 13.31

11270 - Tractor Operator 14.11

11330 - Trail Maintenance Worker 11.22

11360 - Window Cleaner 13.54

12000 - Health Occupations

12010 - Ambulance Driver 16.75

12011 - Breath Alcohol Technician 19.89

12012 - Certified Occupational Therapist Assistant 25.49

12015 - Certified Physical Therapist Assistant 23.23

12020 - Dental Assistant 17.07

12025 - Dental Hygienist 33.43

12030 - EKG Technician 22.52

12035 - Electroneurodiagnostic Technologist 22.52

12040 - Emergency Medical Technician 16.75

12071 - Licensed Practical Nurse I 17.72

12072 - Licensed Practical Nurse II 19.89

12073 - Licensed Practical Nurse III 21.97

12100 - Medical Assistant 14.71

12130 - Medical Laboratory Technician 16.93

12160 - Medical Record Clerk 15.08

12190 - Medical Record Technician 16.53

12195 - Medical Transcriptionist 16.01

12210 - Nuclear Medicine Technologist 32.29

12221 - Nursing Assistant I 10.13

12222 - Nursing Assistant II 11.38

12223 - Nursing Assistant III 12.42

12224 - Nursing Assistant IV 13.47

12235 - Optical Dispenser 17.05

12236 - Optical Technician 15.13

12250 - Pharmacy Technician 14.87

12280 - Phlebotomist 13.47

12305 - Radiologic Technologist 25.09

12311 - Registered Nurse I 24.94

12312 - Registered Nurse II 29.25

12313 - Registered Nurse II, Specialist 29.25

12314 - Registered Nurse III 35.38

12315 - Registered Nurse III, Anesthetist 35.38

12316 - Registered Nurse IV 42.41

12317 - Scheduler (Drug and Alcohol Testing) 20.09

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 20.57

13012 - Exhibits Specialist II 23.52

13013 - Exhibits Specialist III 28.34

13041 - Illustrator I 20.89

13042 - Illustrator II 23.52

13043 - Illustrator III 28.34

13047 - Librarian 28.28

13050 - Library Aide/Clerk 13.39

13054 - Library Information Technology Systems 25.27

Administrator

13058 - Library Technician 15.42

13061 - Media Specialist I 18.42

13062 - Media Specialist II 20.62

13063 - Media Specialist III 22.98

13071 - Photographer I 14.44

13072 - Photographer II 15.01

13073 - Photographer III 18.59

13074 - Photographer IV 22.40

13075 - Photographer V 24.90

13110 - Video Teleconference Technician 17.50

14000 - Information Technology Occupations

14041 - Computer Operator I 17.20

14042 - Computer Operator II 19.24

14043 - Computer Operator III 21.45

14044 - Computer Operator IV 23.84

14045 - Computer Operator V 26.40

14071 - Computer Programmer I (see 1) 25.09

14072 - Computer Programmer II (see 1) 25.31

14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.20

14160 - Personal Computer Support Technician 23.84

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.93

15020 - Aircrew Training Devices Instructor (Rated) 35.00

15030 - Air Crew Training Devices Instructor (Pilot) 41.95

15050 - Computer Based Training Specialist / Instructor 28.93

15060 - Educational Technologist 33.91

15070 - Flight Instructor (Pilot) 39.94

15080 - Graphic Artist 24.69

15090 - Technical Instructor 23.83

15095 - Technical Instructor/Course Developer 29.15

15110 - Test Proctor 19.24

15120 - Tutor 19.24

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.81

16030 - Counter Attendant 9.81

16040 - Dry Cleaner 12.93

16070 - Finisher, Flatwork, Machine 9.81

16090 - Presser, Hand 9.81

16110 - Presser, Machine, Drycleaning 9.81

16130 - Presser, Machine, Shirts 9.81

16160 - Presser, Machine, Wearing Apparel, Laundry 9.81

16190 - Sewing Machine Operator 14.02

16220 - Tailor 15.09

16250 - Washer, Machine 10.97

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 15.46

19040 - Tool And Die Maker 22.45

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.74

21030 - Material Coordinator 19.67

21040 - Material Expediter 19.67

21050 - Material Handling Laborer 13.01

21071 - Order Filler 13.62

21080 - Production Line Worker (Food Processing) 14.74

21110 - Shipping Packer 13.86

21130 - Shipping/Receiving Clerk 14.47

21140 - Store Worker I 11.48

21150 - Stock Clerk 16.46

21210 - Tools And Parts Attendant 14.74

21410 - Warehouse Specialist 14.74 23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 26.76 23021 - Aircraft Mechanic I 25.12 23022 - Aircraft Mechanic II 26.76 23023 - Aircraft Mechanic III 28.32 23040 - Aircraft Mechanic Helper 17.97 23050 - Aircraft, Painter 22.08 23060 - Aircraft Servicer 20.63 23080 - Aircraft Worker 21.95 23110 - Appliance Mechanic 18.74 23120 - Bicycle Repairer 12.83 23125 - Cable Splicer 21.54 23130 - Carpenter, Maintenance 20.20 23140 - Carpet Layer 17.91 23160 - Electrician, Maintenance 22.60 23181 - Electronics Technician Maintenance I 21.00 23182 - Electronics Technician Maintenance II 24.64 23183 - Electronics Technician Maintenance III 26.34 23260 - Fabric Worker 15.61 23290 - Fire Alarm System Mechanic 17.94 23310 - Fire Extinguisher Repairer 14.43 23311 - Fuel Distribution System Mechanic 22.06 23312 - Fuel Distribution System Operator 16.26 23370 - Mowing & Cleaning 7 sites Worker 17.92

23380 - Ground Support Equipment Mechanic 25.12 23381 - Ground Support Equipment Servicer 20.63 23382 - Ground Support Equipment Worker 21.95 23391 - Gunsmith I 18.65 23392 - Gunsmith II 20.94 23393 - Gunsmith III 21.98

23410 - Heating, Ventilation And Air-Conditioning 20.81

Mechanic

23411 - Heating, Ventilation And Air Conditioning 21.85

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 21.25

23440 - Heavy Equipment Operator 18.92

23460 - Instrument Mechanic 23.76

23465 - Laboratory/Shelter Mechanic 18.31

23470 - Laborer 11.70

23510 - Locksmith 15.46

23530 - Machinery Maintenance Mechanic 20.58

23550 - Machinist, Maintenance 18.32

23580 - Maintenance Trades Helper 13.78

23591 - Metrology Technician I 22.45

23592 - Metrology Technician II 23.91

23593 - Metrology Technician III 25.31

23640 - Millwright 22.37

23710 - Office Appliance Repairer 20.06

23760 - Painter, Maintenance 17.36

23790 - Pipefitter, Maintenance 21.57

23810 - Plumber, Maintenance 20.54

23820 - Pneudraulic Systems Mechanic 19.57

23850 - Rigger 21.30

23870 - Scale Mechanic 17.11

23890 - Sheet-Metal Worker, Maintenance 19.19

23910 - Small Engine Mechanic 16.93

23931 - Telecommunications Mechanic I 26.53

23932 - Telecommunications Mechanic II 29.28

23950 - Telephone Lineman 20.47

23960 - Welder, Combination, Maintenance 16.33

23965 - Well Driller 17.53

23970 - Woodcraft Worker 19.57

23980 - Woodworker 13.76

24000 - Personal Needs Occupations

24570 - Child Care Attendant 10.36

24580 - Child Care Center Clerk 12.63

24610 - Chore Aide 10.93

24620 - Family Readiness And Support Services 14.03

Coordinator

24630 - Homemaker 16.76

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 21.71

25040 - Sewage Plant Operator 17.93

25070 - Stationary Engineer 21.71

25190 - Ventilation Equipment Tender 13.51

25210 - Water Treatment Plant Operator 17.93

27000 - Protective Service Occupations 27004 - Alarm Monitor 14.85

27007 - Baggage Inspector 12.47

27008 - Corrections Officer 14.99

27010 - Court Security Officer 17.55

27030 - Detection Dog Handler 16.44

27040 - Detention Officer 15.32

27070 - Firefighter 17.97

27101 - Guard I 12.47

27102 - Guard II 16.44

27131 - Police Officer I 19.70

27132 - Police Officer II 21.89

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 10.92

28042 - Carnival Equipment Repairer 12.69

28043 - Carnival Worker 8.19

28210 - Gate Attendant/Gate Tender 15.26

28310 - Lifeguard 11.33

28350 - Park Attendant (Aide) 17.08

28510 - Recreation Aide/Health Facility Attendant 10.14

28515 - Recreation Specialist 13.65

28630 - Sports Official 12.93

28690 - Swimming Pool Operator 18.99

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 19.62

29020 - Hatch Tender 19.62

29030 - Line Handler 19.62

29041 - Stevedore I 18.07

29042 - Stevedore II 20.99

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.30

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.78

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.38

30021 - Archeological Technician I 19.76

30022 - Archeological Technician II 21.45

30023 - Archeological Technician III 27.39

30030 - Cartographic Technician 26.56

30040 - Civil Engineering Technician 19.26

30061 - Drafter/CAD Operator I 19.76

30062 - Drafter/CAD Operator II 21.45

30063 - Drafter/CAD Operator III 23.91

30064 - Drafter/CAD Operator IV 29.42

30081 - Engineering Technician I 16.64

30082 - Engineering Technician II 20.00

30083 - Engineering Technician III 20.90

30084 - Engineering Technician IV 26.47

30085 - Engineering Technician V 31.68

30086 - Engineering Technician VI 37.02

30090 - Environmental Technician 22.75

30210 - Laboratory Technician 17.80

30240 - Mathematical Technician 25.03

30361 - Paralegal/Legal Assistant I 19.41

30362 - Paralegal/Legal Assistant II 24.05

30363 - Paralegal/Legal Assistant III 29.41

30364 - Paralegal/Legal Assistant IV 35.56

30390 - Photo-Optics Technician 26.56

30461 - Technical Writer I 26.07

30462 - Technical Writer II 30.07

30463 - Technical Writer III 36.37

30491 - Unexploded Ordnance (UXO) Technician I 23.76

30492 - Unexploded Ordnance (UXO) Technician II 28.74

30493 - Unexploded Ordnance (UXO) Technician III 34.45

30494 - Unexploded (UXO) Safety Escort 23.76

30495 - Unexploded (UXO) Sweep Personnel 23.76

30620 - Weather Observer, Combined Upper Air Or (see 2) 23.91

Surface Programs

30621 - Weather Observer, Senior (see 2) 27.39

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 11.49

31030 - Bus Driver 17.43

31043 - Driver Courier 13.94

31260 - Parking and Lot Attendant 9.40

31290 - Shuttle Bus Driver 15.38

31310 - Taxi Driver 10.70

31361 - Truckdriver, Light 15.38

31362 - Truckdriver, Medium 16.81

31363 - Truckdriver, Heavy 20.87

31364 - Truckdriver, Tractor-Trailer 20.87

99000 - Miscellaneous Occupations

99030 - Cashier 9.25

99050 - Desk Clerk 10.05

99095 - Embalmer 26.90

99251 - Laboratory Animal Caretaker I 10.03

99252 - Laboratory Animal Caretaker II 11.03

99310 - Mortician 29.59

99410 - Pest Controller 14.59

99510 - Photofinishing Worker 16.45

99710 - Recycling Laborer 15.00

99711 - Recycling Specialist 18.87

99730 - Refuse Collector 13.06

99810 - Sales Clerk 13.50

99820 - School Crossing Guard 13.53

99830 - Survey Party Chief 20.64

99831 - Surveying Aide 12.11

99832 - Surveying Technician 17.05

99840 - Vending Machine Attendant 11.69

99841 - Vending Machine Repairer 14.27

99842 - Vending Machine Repairer Helper 11.69

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; and 3 weeks after 8 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same

Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption.

Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September

2015, unless otherwise indicated.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE

Standard Form 1444 (SF-1444)

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be retroactive to the commencement date of the contract (See 29 CFR

4.6(b)(2)(iv)(C)(vi)). When multiple wage determinations are included in a contract, a separate

SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, U.S. Department of

Labor, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the

Directory) should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

SECTION K--REPRESENTATIONS, CERTIFICATIONS, AND

OTHER STATEMENTS OF OFFERORS OR RESPONDENTS

NOTE: Offerors should address questions concerning VETS-100 reporting and reporting requirements to the

Office of Veterans Employment and Training Services offices at the following address:

U. S. Department of Labor

VETS-100 Reporting

4200 Forbes Blvd., Suite 202

Lanham, MD 20703

Telephone: (301) 306-6752

Website: www.vets100.cudenver.edu

Reporting Questions: HelpDesk@vets100.com

Reporting Verification: Verify@vets100.com

K.1 AGAR 452.219-70 SIZE STANDARD AND NAICS CODE INFORMATION (SEP 2001)

The North American Industrial classification System Code(s) and business size standard(s) describing the products and/or services to be acquired under this solicitation are listed below:

Contract line item(s): All Items

--NAICS Code 561730

--Size Standard $7.5 million

The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

K.2 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2014)

(a)(1) The North American Industry Classification System

(NAICS) code for this acquisition is 561730 (2) The small business size standard is

$19 million 3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees. (b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the

Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:[ ] (i) Paragraph (d) applies.[ ] (ii)

Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.(c)(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:(i) 52.203-2, Certificate of Independent Price

Determination. This provision applies to solicitations when a firm-

FAC 2005–72 JANUARY 1, 2014

SUBPART 52.2—TEXT OF PROVISIONS AND CLAUSES 52.204-8 52.2-12.1 fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless— (A) The acquisition is to be made under the simplified acquisition procedures in Part 13;(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or(C) The solicitation is for utility services for which rates are set by law or regulation. (ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations http://www.vets100.cudenver.edu/ mailto:HelpDesk@vets100.com mailto:Verify@vets100.com that do not include the provision at 52.204-7, System for Award Management.(iv) 52.204-5, Women-Owned Business

(Other Than Small Business). This provision applies to solicitations that—(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and (C) Are for contracts that will be performed in the

United States or its outlying areas. (v) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations—

Representation. This provision applies to solicitations using funds appropriated in fiscal years 2008, 2009, 2010, or

2012.

(vi) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.(vii) 52.214-14, Place of Performance—Sealed

Bidding.This provision applies to invitations for bids except those in which the place of performance is specified by the

Government. (viii) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.(ix) 52.219-1, Small Business Program Representations (Basic &

Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the

Coast Guard.(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast

Guard.(x) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xi) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity. (xii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal

Opportunity.(xiii) 52.222-38, Compliance with Veterans’ Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.(xiv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA–designated items; or include the clause at

52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts. (xv) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA– designated items. (xvi) 52.225-2, Buy American Act Certificate. This provision applies to solicitations containing the clause at 52.225-1. (xvii) 52.225-4, Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.(A) If the acquisition value is less than $25,000, the basic provision applies.(B) If the acquisition value is $25,000 or more but is less than

$50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $79,507, the provision with its Alternate II applies.

(D) If the acquisition value is $79,507 or more but is less than $100,000, the provision with its Alternate III applies.

(xviii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xix) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan—Certification. This provision applies to all solicitations.(xx) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or

Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations. (xxi) 52.226-

2, Historically Black College or University and Minority Institution Representation. This provision applies to—(A)

Solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions; and (B) For DoD, NASA, and Coast Guard acquisitions, solicitations that contain the clause at 52.219-23, Notice of Price Evaluation adjustment for Small Disadvantaged Business Concerns.

FAC 2005–72 JANUARY 1, 2014 52.204-9 FEDERAL ACQUISITION REGULATION 52.2-12.2 (2) The following certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.] (i) 52.219-22, Small Disadvantaged Business Status. (A) Basic.

(B) Alternate I. (ii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iii) 52.222-48, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Certification.

(iv) 52.222-52, Exemption from Application of the Service Contract Act to Contracts for Certain Services–

Certification. (v) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA–

Designated Products (Alternate I only). (vi) 52.227-6, Royalty Information. (A) Basic. (B) Alternate I.

(vii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.(d) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through ttps://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR

4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date].These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

K.4 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION.

As prescribed in 19.309(d), insert the following clause:

POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(a) Definitions. As used in this clause—

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is “not dominant in its field of operation” when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts—

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this http://www.acquisition.gov/ https://www.acquisition.gov/far/current/html/Subpart%2019_3.html#wp1101393 https://www.acquisition.gov/far/current/html/52_217_221.html#wp1135887 contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the rerepresentation required by paragraph (b) of this clause by validating or updating all its representations in the Online Representations and

Certifications Application and its data in the Central Contractor Registration, as necessary, to ensure that they reflect the Contractor’s current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the

Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in

ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it o is, o is not a small business concern under NAICS Code 561730 assigned to contract number N/A.

[Contractor to sign and date and insert authorized signer’s name and title].

K.5 AGAR 409.471 Solicitation Provision and Contract Clause.

(a) Solicitation Provision. The contracting officer shall insert the provision at 452.209–70, Representation by

Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction, in all solicitations above the micro-purchase threshold, except for those of the Forest Service. For all Forest Service solicitations above the micro-purchase threshold, the contracting officer shall use Alternate 1 of the provision.

Alternate 1 (SEP 2015). The Contracting Officer shall use this alternate for all Forest Service solicitations above the micro-purchase threshold:

(a.) Awards made under this solicitation are subject to the provisions contained in the Consolidated Appropriations

Act, 2012 (P.L. No. 112-74), Division E, Sections 433 and 434 regarding corporate felony convictions and corporate federal tax delinquencies. To comply with these provisions, all offerors must complete paragraph (1) of this representation, and all corporate offerors also must complete paragraphs (2) and (3) of this representation.

(b) The Offeror represents that –

(1) The Offeror is [ ], is not [ ] (check one) an entity that has filed articles of incorporation in one of the fifty states, the District of Columbia, or the various territories of the United States including American Samoa, Federated States of Micronesia, Guam, Midway Islands, Northern Mariana Islands, Puerto Rico, Republic of

Palau, Republic of the Marshall Islands, U.S. Virgin Islands. (Note that this includes both for-profit and non-profit organizations.)

If the Offeror checked “is” above, the Offeror must complete paragraphs (2) and (3) of the representation. If

Offeror checked “is not” above, Offeror may leave the remainder of the representation blank.

http://www.sba.gov/content/table-small-business-size-standards

(2) (i) The Offeror has [ ], has not [ ] (check one) been convicted of a felony criminal violation under Federal or State law in the 24 months preceding the date of offer.

(ii) Offeror has [ ], has not [ ] (check one) had any officer or agent of Offeror convicted of a felony criminal violation for actions taken on behalf of Offeror under Federal law in the 24 months preceding the date of offer.

(3) The Offeror does [ ], does not [ ] (check one) have any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability.

SECTION L--INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS OR RESPONDENTS

L.1 FAR 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

www.arnet.gov/far/ www.usda.gov/procurement/policy/agar.html

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1)

52.204-6 Data Universal Numbering System (DUNS) (JUL 2013)

52.215-1 Instructions to Offerors--Competitive Acquisition (JAN 2004)

52.237-1 Site Visit (APR 1984)

AGRICULTURE ACQUISITION REGULATIONS (48 CFR CHAPTER 4) CLAUSES

452.204-70 Inquiries (FEB 1988)

L.2 FACSIMILE AND ELECTRONIC SUBMITTED QUOTES

Quotes may be e-mailed to fmorman@fs.fed.us

Faxed copies will not be accepted.

L.3 FAR 52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates award of a firm fixed price contract resulting from this solicitation.

L.4 ACCEPTANCE OF QUOTES

Quotes will be accepted until 4:00 p.m. Eastern Time on May 13, 2016.

http://www.arnet.gov/far/ http://www.usda.gov/procurement/policy/agar.html http://www.usda.gov/procurement/policy/agar.html mailto:fmorman@fs.fed.us

L.5 FAR 52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the

Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from

Chattahoochee National Forest, Attn: Francoies Morman - Contracting Officer, 1755 Cleveland HWY, Gainesville, GA 30502.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the

GAO.

L.6 INSTRUCTIONS FOR THE PREPARATION OF BIDS

(a) General Instructions. Quotes/bids submitted in response to this…