Seed_Storage_Rolling_Shevling_Specifications.docx

We have a requirement for a rolling storage shelving system for a new Greenhouse for the USDA-ARS on the Washington State University Campus.

The storage unit needs to accommodate 1728 boxes for seed storage. Each tray is 23.25” long x 13” wide x 6” tall. Each bin will have a weight of 20- 30 lbs which must be supported. They have spot welded joints at the corners and on the folds, hemmed tops to the sides and a folded handle at one of the narrow ends.

The space for the cabinets needs to fit in a space of width 15’ 0” by length 23’ 0” by height 10’ 6-15/16” The cabinets rolling mechanism must be operated kinetically by a single person when fully loaded with bins.

The Government requires submission to include:

-Blueprint drawing of suggested set up.

-Pictures of similar finished product or brochures of a finished product -Type of materials to be used.

-Shelving load limits -Set up/installation instructions.

-Available color samples that are available, red is preferred but gray may also be acceptable.

-Timeline for delivery.

-Pricing -Warranty information

**Note: The Government understands the requested deliver date of May 1, 2015 is likely not realistic, and is being used as a guide line based on our original building design timeline. Offers will be ranked by offered delivery date compared to the May 1, 2015 scenario.