Advantor SOW (1).pdf

MISSION FOCUSED…VALUED AIRMEN

DEPARTMENT OF THE AIR FORCE

6TH AIR MOBILITY WING (AMC)

MACDILL AIR FORCE BASE, FLORIDA

Statement of Work

3 August 2022

Install Advantor Intrusion Detection System for SCIF Space at Building 295

The contractor shall provide all personnel, tools, software/hardware, materials, shipping costs, labor, supervision, equipment, service, and other items to perform all related and incidental, work necessary to install the Advantor Intrusion Detection System for the KC-135 Flight Simulator SCIF located in building 295.

The purchase request is needed for Advantor Systems Corporation (ASC) to provide the following products and services:

Preform a pre-installation site survey

Provide an Advantor Submittal package in electronic/PDF format. Submittal package will include Product Specification sheet, Product Operation and Maintence Manuals, Design Drawing to include Device layout, Junction box layout and wiring for conduit fill, block riser and typical device installation.

Provide the system as detailed above in the Project Details Section.

Provide all required system cabling.

Provide all required conduit.

Provide panel terminations, commission, download and test operations of IDS with SFS

BDOC.

Provide panel terminations, commissions, download and test operations of ACS with the governments SFXi System Administrator.

Provide SFXi Access Control Program Training.

Provide SFXi Badging Training.

Provide 100 Direct Print HID Prox cards and badging supplies to support badge printer.

Provide the 120V AC connections from the client-provider breaker box to each

Infraguard II IDS and ACS chassis.

Provide Basic IDS Operationa; training.

Provide an Advantor As-Built Drawing in electronic/PDF format following project signoff.

Work will be accomplished by an Advantor certified technician holding a current company certificate of competency.

The contractor is responsible for complying with all applicable AF 31-101 regulations, ICD705 compliance, and Occupational Safety and Health Administration laws and regulations.

The contractor shall clean the work area daily and remove any trash, paper, or other debris created in the performance of the above requirement.

The contractor shall transport, use, and dispose of all hazardous material (if any) in accordance with all applicable Federal and Base regulations. All hazardous material will be disposed of off base in accordance with applicable federal, state, and local regulations at their expense. This includes the panel battery from the removed panel box, if requested by base personnel.

The contractor shall comply with all installation security requirements. The contractor shall be responsible for safeguarding all government property and at the end of each work period all government facilities, equipment, and materials shall be secured. At the conclusion of the work, those previously notified shall be informed that all the work has been concluded.

The contractor will repair or replace, without charge, any merchandise manufactured by it and proved defective in material or workmanship for a period of three years after the date of shipment. OEM products will be warranted for the period of time provided for by the original equipment manufacturer. The contractor will warranty all replacement parts and repairs for 90 days from the date of shipment. Repairs made necessary by reason of misuse, alteration, normal wear, excessive voltage, or Acts of God do not need to be covered under warranty.

The government will furnish the communications infrastructure from the panel to Security Forces’ BDOC. This communication line shall be a supervised, dedicated twisted copper pair comm.

The government will provide a secure storage location for the equipment.