ADDITIONAL INFORMATION HC101321QA029.pdf

ADDITIONAL INFORMATION PERTINENT TO THIS REQUIREMENT

TESTING PARAMETERS AND THRESHOLDS. THE FOLLOWING TESTING PARAMETERS

SHALL BE MEASURED DURING TEST AND ACCEPTANCE TESTING:

1. SEVERELY ERRORED SECONDS (SES): SHALL BE LESS THAN 0.2 PERCENT.

2. DEGRADED MINUTES (DM); SHALL BE LESS THAN 0.2 PERCENT.

3. ERROR FREE SECONDS (EFS): SHALL BE GREATER THAN 99.5 PERCENT.

4. LOSS OF BIT COUNT INTEGRITY (LBCI): LOSS OF BIT COUNT INTEGRITY SHALL BE

MONITORED USING TEST EQUIPMENT WHICH CAN DETECT AND MEASURE THE

OCCURENCE OF THE INSERTION OR DELETION OF ONE OR MORE BITS INTO THE DIGITAL

BIT STREAM, OFTEN DEFINED AS PATTERN SLIP.

5. MEAN TIME TO LOSS OF BIT COUNT INTEGRITY (MTTLBCI) SHALL BE GREATER THAN 24

HOURS.

6. ROUND TRIP DELAY (RTD) RTD SHALL BE MEASURED OVER THE 10 GBPS CIRCUIT &

SHALL BE LESS THAN OR EQUAL TO 35 MILLISECONDS.

CIRCUIT MUST BE TAGGED WITH LOCAL EXCHANGE CARRIER (LEC) CIRCUIT ID AND

LONG-HAUL CARRIER ID AT TELCO DEMARC LOCATION.

CIRCUIT REQUIRES THE FOLLOWING TECHNICAL PARAMETERS:

A. DATA RATE: 10.0 GBPS PLUS OR MINUS 20 PPM

B. FORMAT: ETHERNET 802.3AW

C. FRAMING: ETHERNET 802.3AW

D. ELECTRICAL INTERFACE: OPTICAL, SINGLE MODE, 1310 NM

E. IEEE STANDARD: 802.3AW COMPLIANT

F. LINE MUST REMAIN OPERATIONAL AND AVAILABLE

TO USERS 24 HOURS A DAY, SEVEN DAYS PER WEEK, AT LEAST 99.5% OR BETTER.

G. REQUEST ONE-HOUR RESPONSE TIME TURN-AROUND TO REPAIR ONCE TROUBLE

CALL HAS BEEN REPORTED.

H. GFE CLOCKING: VENDOR ESFU (OR EQUIVALENT) TEST & ACCEPTANCE

INSTRUCTIONS: NOT TO BE ENGINEERED INTO THE CIRCUIT.

I. SINGLE MODE FIBER TERMINATIONS: SC OR LC

J. NO NETWORK INTERFACE UNIT (NIU).

K. DEDICATED PATH

L. VENDOR MUST HAVE CIRCUIT VISIBILITY TO ASSIST IN ANY CIRCUIT OUTAGES.

M. VENDOR MUST TEST CIRCUIT END-TO-END FOR 24 HOURS IAW EITHER ITU-T Y.1564

OR RFC-6815 WITH A SERVICE AVAILABILITY OF 99.5% OR BETTER.

N. VENDOR MUST HAVE A 24X7 NETWORK OPS CENTER.

O. COMMERCIAL CIRCUIT WILL BE ACCEPTED BY THE GOV'T BY THE DHS NCPS

NETWORK OPERATIONS CENTER, CORRY STATION, PENSACOLA, FL; COM'L 1-866

645-4357; E-MAIL DL-NOC_NETWORK@US-CERT.GOV

VENDOR MUST PROVIDE LIGHT LEVEL READINGS (DB LOSS) AT THE DEMARC LOCATIONS

PRIOR TO CIRCUIT TURN UP TO THE GOV'T ENSURING THE LIGHT LEVELS ARE WITHIN

SPECS. LIGHT LEVELS MUST BE ADJUSTED TO -5 TO -13DBM.

SERVICE MUST BE DEDICATED, NON-ROUTED, 10 GBPS E-PLS PLACED OVER TELCO

OPTICAL MULTIPLEX SYSTEMS/OPTICAL TRANSPORT NETWORK (OTN).

THE LOCAL COMM UNIT WILL EXTEND SERVICE FROM THE COMMERCIAL DEMARC TO THE

SERVICE DELIVERY POINT (SDP). FOR CIRCUIT ACTIVATION ASSISTANCE CONTACT DCP

COMMERCIAL ACTIVATION TEAM (CAT) AT D312-850-0820, C614-692-0820. DISA REQUIRES

THAT CIRCUIT VENDOR OBTAIN A SIGNATURE FROM A RESPONSIBLE SITE POC

CERTIFYING THAT THE VENDOR PROVIDED THE CONNECTIVITY AND THAT THE CIRCUIT IS

PROPERLY TAGGED WITH CIRCUIT ID AND TSR NUMBER OR CCSD. VENDOR WILL DELIVER

SERVICE TO THE COMMERCIAL DEMARC IDENTIFIED IN THE DOCUMENT.

THERE IS ONE COMMERCIAL INTERFACE POINT FOR THIS CIRCUIT AT CORRY STATION,

PENSACOLA, FL. THAT IS THE SECOND TELCO POP ON THIS INSTALLATION AT BLDG 3782,

ROOM 174, 1000 CHIEFS' WAY, CORRY STATION, PENSACOLA, FL. WINNING VENDOR MUST

DELIVER SERVICE TO THIS POP WHICH HAS TWO TELCO LEC'S PRESENT AT THIS

FACILITY. DIVERSITY FOR CONTINUAL MISSION SUPPORT REQUIRED.

FOR CORRY STATION LOCATION: SERVICE MUST USE THE UNITI FIBER/SOUTHERN LIGHT

LOCAL EXCHANGE CARRIER (LEC) ACCESS VIA THE CORRY STATION SOUTH GATE TELCO

ACCESS TO AVOID/DIVERSIFY SERVICE FROM THE AT&T LOCAL NETWORK SERVICES

(LNS)/BELL SOUTH/SOUTHERN BELL LEC CARRIER SYSTEM COMING IN FROM MAIN GATE.

OTHER DHS CIRCUITS ARE ALREADY COMING INTO THE FACILITY VIA THE AT&T LNS/BELL

SOUTH/SOUTHERN BELL LEC SYSTEMS.

FOR STENNIS SPACE CENTER LOCATION: SERVICE MUST USE THE LOCAL EXCHANGE

CARRIER (LEC) TELCO DEMARC FOR EITHER UNITI FIBER/SOUTHERN LIGHT OR

LUMEN/LEVEL-3 FOR THE DHS DC1 STENNIS LOCATION. USE OF AT&T LNS (FORMERLY

BELL SOUTH/SOUTH CENTRAL BELL (SC) OR AT&T UVN IS NOT ACCEPTABLE AS AT&T LNS

& AT&T UVN ARE ALREADY PROVIDING OTHER DHS SERVICES ORDERED UNDER THE

DITCO GSA EIS CONTRACT TO THIS LOCATION. ALSO, USE OF NASA STENNIS DEMARC IN

BLDG 1201 IS NO LONGER ACCEPTABLE AS BLDG 1201 IS SCHEDULED FOR DEMOLITION.

THE DHS DC1 STENNIS TELCO DEMARC IS NASA STENNIS, BLDG 9357, RM 115, 9357

CYPRESS LOOP RD, STENNIS SPACE CENTER, MS 39529.

REQUEST TELCO VENDOR PROVIDE ALL LONG HAUL AND LEC CIRCUIT IDENTIFIERS TO

DELIVER THE CIRCUIT TO THESE TWO END LOCATIONS TO MR BERNARD J. YOCUM JR.,

EMAIL: BERNARD.YOCUM@ASSOCIATES.CISA.DHS.GOV, PRIOR TO INSTALLTION OF THE

CIRCUIT ALONG WITH ANY ENGINEERING RECORDS FOR THIS CIRCUIT.

THIS WILL BE A TELECOMMUNICATION SERVICE PRIORITY (TSP) CIRCUIT WITH A

RESTORAL PRIORITY OF TSP ASSIGNED IS TSP0KL06N-02.

DIVERSITY/AVOIDANCE COMMERCIAL CIRCUIT: NXDA 000042 /NXDA 000043. SATELLITE

OBJECTION: DIVERSITY: SERVICE MUST BE DIVERSE FROM AT&T LOCAL (BELL

SOUTH/SOUTHERN BELL (SB) & SOUTH-CENTRAL BELL (SC) AT BOTH LOCATIONS AND

AT&T UVN AT STENNIS TO PROVIDE DIVERSITY AND SURVIVABLE COMMUNICATIONS FOR

DHS. DITCO HAS AWARDED NUMEROUS CONTRACTS TO AT&T UNDER GSA NETWORX

AND EIS CONTRACTS TO THESE TWO LOCATIONS CREATING SINGLE POINT OF FAILURE.

THIS CIRCUIT MUST NOT BE ROUTED OVER THESE SYSTEMS TO PROVIDE ALTERNATE

MEANS OF CONNECTIVITY.

AVOIDANCE: AVOIDANCE OF DISN/DODIN IS REQUIRED FOR THIS CIRCUIT IN ORDER TO

KEEP SEPARATE FROM DOD NETWORKS.

FACILITY SECURITY ACCESS REQUIREMENT: (SP A) ESCORT REQUIRED; PERSONNEL

REQUIRING ACCESS MUST COORDINATE WITH SITE POCS A MINIMUM OF 72 HOURS

PRIOR TO REQUIRING ACCESS TO THE FACILITIES. (SP B) ESCORT REQUIRED;

PERSONNEL REQUIRING ACCESS MUST COORDINATE WITH SITE POCS.

THE GOVERNMENT WILL EXTEND THE SERVICE FROM THE CORRY STATION DHS TELCO

DEMARC TO THE DHS END USER FACILITIES USING DHS FIBER.