Addendum No_ 1 ITB 006_24.pdf
PDF 200 KB Posted
- Attached to
- ITB #006-24
- Solicitation number
- PE-62350-NONST-2025-000000005
- Issued by
- Calhoun County, Georgia
About this file
This document is an Addendum to Invitation to Bid (ITB) No. 006-24 issued by the City of Fort Oglethorpe, Georgia for the acquisition and delivery of 1 vehicle for use by the Public Utilities department. The addendum addresses various questions and specifications related to the vehicle, including body length, height, door type, crane requirements, lighting, compartments, paint, bedliner, and crane capabilities. The bid proposals must be submitted to the City of Fort Oglethorpe no later than Friday, September 27, 2024, at 2:30 pm, and an award will be made based on the lowest responsive and responsible bid that meets the requirements of the ITB. The City may allow deviations to the specifications if the dealer has the vehicle in stock and available for immediate delivery.
The bid price shall stand for 90 days from the due date of the bid. No information is provided regarding any set-asides, incumbents, funding requirements, or sources. The document indicates that the City of Fort Oglethorpe, which is located in Calhoun County, Georgia, is the sole agency involved in this procurement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ITB _ 006_24.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Addendum No. 1
Invitation to Bid (ITB) No. 006-24 Public Utilities - Vehicle
September 23, 2024
Contractors are responsible for acknowledging receipt of this addendum by completing the Addenda Acknowledgement form in the bid proposal packet. This addendum is also posted on the City’s website
(www.fortogov.com) under the Bids and Proposals tab (http://fortogov.com/bids-and-proposals/).
1. Question: Body – What length are you looking for 9 ft or 11’?
Answer: We are looking for an 11’ body.
2. Question: Body Height – Would 42” height be tall enough or do you want 50”
Answer: We are looking for a body height of 42”.
3. Question: Single Panel Doors?
Answer: Yes
4. Question: Crane Body need to have a minimum of 30,000 Ft Lb. Rating for Crane tower not to exceed 50.000 Ft Lb Answer: Yes
5. Question: Oxy/Ace Compartment – Do you require to have a compartment for welding gasses? This would be 60” in height. Also would you like hooks inside compartment to hold gas hoses?
Answer: No
6. Question: Workbench Bumper?
Answer: Yes
7. Question: Do you need a Vise? 4”?
Answer: Yes
8. Question: Interior Work lights? Do you want these? LED?
Answer: No
9. Question: Strobe Lights? Two in Grill and two at rear of body?
Answer: Yes
10. Question: Exterior Work Lights on the body? One per side and two located at the rear to be wired independently Answer: Yes
11. Question: Do you need any rollout compartments in any of the bins? If so please give a description of which bin location and how many drawers and sizes http://www.fortogov.com/ http://fortogov.com/bids-and-proposals/
Answer: Toolbox in street side front compartment
12. Question: Would you like Pressurized compartments as a standard feature?
Answer: No
13. Question: Paint – White in color to match the chassis?
Answer: Yes
14. Question: Bedliner – Do you require a bedliner to be sprayed in the bed? If so, what areas, TOPS, SIDES, DECK, WORKBENCH
Answer: Yes – Top, sides, deck, and workbench
15. Question: Fully Infinitely Adjustable Shelves in compartments?
Answer: Yes
16. Question: Would you like Master Lock system on the body? This is a single rod system located one per side that you can push in a place a pad lock on it to lock all boxes at one time per side.
Answer: No
17. Question: 5,000 Lb Crane to have Minimum of 30,000 Ft. – Lb Crane Rating?
Answer: Yes
18. Question: 5K Electric/Hydraulic crane or 5K Electric/Hydraulic with Proportional control of hydraulic functions (Boom Up.Down & Rotation, Extension) the winch is electric so it will not have proportional control.
Answer: 5K with proportional control
19. Question: Crane to have a Minimum 21’ of reach Answer: Yes
20. Question: Do you or would you like to have Proportional Control on Crane?
Answer: Yes
21. Question: Do you require boom tip Lights?
Answer: No
22. Question: Would you like the cable to have 120’ of 3/8” winch cable?
Answer: Yes
23. Question: Would you like a Spring Loaded Boom Rest?
Answer: No
24. Question: Crane Not to exceed a operating weight of 1445 lbs?
Answer: We do not have a requirement regarding this.
25. Question: Do you require the crane to be able to go -15 degrees to + 73 Degrees?
Answer: We do not have a requirement regarding this, just a standard operating range.
26. Question: Miller EnPak would a A30 work? That unit would be comprised of Diesel of Gas. This unit would give 30 CFM Rotary Screw Air Compressor, 6,500 Watt Generator with (2) 120 Volt GFCI receptacles and (1) 120/240-volt receptacle, Battery Charge / Crank Assist produces up to 100 amps of DC current to quickly charge 12 and 24 volt batteries. It can provide jobsite equipment with weak batteries up to 300 amps of crank assist. Provides multiprocess weld capabilities with 210 amps of output, Would include 50’ of lead and ground for welder and 25’ Jump Start cable.
Answer: The current model A60BG would be sufficient.
27. Question: Air hose reel in Curbside rear Crane Compartment?
Answer: Yes
28. Question: Do you want a Fuel Hose reel for tank? 25’ of line Answer: Yes
File details come from the government source that posted it. Updated .