Addendum 2 Specifications 25IFB13269.pdf
PDF 178 KB Posted
- Attached to
- Shooting Range Benches and Stools
- Solicitation number
- 25IFB13269
- Issued by
- Pennington County, South Dakota
About this file
This is Addendum 2 to specification 25IFB13269 issued by the South Dakota State Shooting Sports Complex for the procurement of 124 shooting benches with 2 stools per bench (248 total stools). The benches and stools must be constructed according to a specific design available from meetyououtside.com, using A36 Steel (3/8" thick) with 304 Stainless Steel (3/8" thick) for the tops and feet, all with bare metal mill finish and no paint or powder coating. Two modifications to the original design are required: removal of cupholders and installation of removable name plates. Delivery is required to the South Dakota State Shooting Sports Complex in Piedmont, SD by August 22, 2025.
The name plates must accommodate up to 17 spaces for sponsor names, with 53 known sponsor plates to be produced with the first bench delivery. The remaining 71 benches will either have sponsor names added as they become known or will display "South Dakota GFP" if no sponsor is identified. The delivery cost must be included in the proposal, and the receiving agency will provide unloading equipment at the delivery site. Questions should be directed to Andy Mobley at the South Dakota Office of Procurement Management.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Specifications 25IFB13269.pdf | ||
| Addendum 1 Specifications 25IFB13269.pdf | ||
| SDVendorManual_20231117.pdf | ||
| SDVendorManual_20231117.pdf | ||
| Specifications 25IFB13269.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Addendum 2
Updated Specifications 25IFB13269
Shooting Range Benches and Stools
The South Dakota State Shooting Sports Complex is requesting bids for 124 shooting benches with 2 stools for each bench (248 ea.).
The benches and stools will meet the following requirements:
1. Utilize the design shown. The DXF file is available for purchase from meetyououtside.com, https://meetyououtside.com/products/target-shooting-bench.
2. The benches will be constructed from A36 Steel, 3/8” thick, except for the top and feet, which shall be constructed from 304 Stainless Steel, 3/8” thick, mill finish. Bare metal finish, no paint or powder coating.
3. The stools shall be constructed of A36 Steel, 3/8” thick, except for the feet and seat, which shall be constructed of 304 Stainless Steel, 3/8” thick, mill finish. Bare metal finish, no paint or powder coating. Stools are not to be attached to the benches.
4. Two changes from the design as shown will be:
a. No cupholders in the corners of the bench top.
b. The front name plate shall be removable, via bolts on each end. Unless specified at the time of ordering, each bench will have a flat, blank name plate. Included in the cost of each bench will be the cost of producing a name plate with up to 17 spaces, showing the bench sponsor’s name. If all 124 sponsors are not filled by the time of manufacture the purchasing agency has up to one year after the issue of the purchase order to request sponsor name plates until all 124 have been filled. The first 53 known sponsor nameplates at the time of this solicitation can be produced and shipped with the first 53 benches. The remaining 71 nameplates to be branded at the time of production with either a yet to be known sponsor’s name, or if still no sponsor’s name is known they will be produced with the brand “South Dakota GFP”.
https://meetyououtside.com/products/target-shooting-bench https://meetyououtside.com/products/target-shooting-bench
5. Cost of delivering the benches to the South Dakota State Shooting Sports Complex at 14514 Bill Janklow Road, Piedmont, SD 57769. (Approximately 8 miles north of Rapid City on Elk Vale Road) no later than August 22, 2025 shall be included in the proposal. Receiving agency will have equipment on site for unloading.
6. For questions or clarifications contact:
Andy Mobley, South Dakota Office of Procurement Management Andy.Mobley@state.sd.us 605-773-4278
File details come from the government source that posted it. Updated .