Addendum 1 - Project 22006.pdf

PDF 1 MB Posted

Attached to
Project # 22006 - HACC Wide Flatwork Project
Solicitation number
S-C03343-00005298
Issued by
Clackamas County, Oregon

About this file

This document is Addendum No. 1 to the Invitation to Bid for the HACC Wide Flatwork Project, Project #22006, issued by the Housing Authority of Clackamas County (HACC) in Oregon City, Oregon. The addendum revises the original bid documents by deleting the original bid form and wage determination, and adding a revised bid form, scope of work and drawings for Lots #36 and #37, and an updated wage determination. The project involves concrete flatwork repairs and replacements at various properties managed by HACC. Bids are due by the original bid closing date and time. Award will be made to the responsive and responsible bidder submitting the lowest bid price.

The bid form provides a cost breakdown for 37 separate lots of work, with unit prices for replacement, sealcoating, and striping of concrete driveways, sidewalks, and parking areas. Wage rates per the updated wage determination from the Department of Labor must be paid for all work performed. The contract will be awarded based on the lowest responsive and responsible bid price.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

HACC WIDE FLATWORK PROJECT – PROJECT #22006

HOUSING AUTHORITY OF CLACKAMAS COUNTY

P.O BOX 1510, 13900 S. GAIN STREET, OREGON CITY, OR 97045

ADDENDUM NO. 1 Page 1 of 1

INVITATION to BID

ADDENDUM #1

January 9, 2023

It is the responsibility of the prospective bidders to note the contents of this addendum and to notify the Owner that the addendum has been received. Acknowledge receipt by noting receipt of this addendum on the bid form.

The following changes in the contract documents constitute this addendum. All changes by addendum are to be included in proposal form and the contents of addenda become part of the contract documents for this project. All changes offset only the specified drawings, words, or paragraphs mentioned. The balance of the contract documents will remain in full force.

For description of individual revisions, see the attached notes and details. These revisions to contract documents are noted by individual revision numbers.

DELETE THE FOLLOWING:

1. Original Bid Form.

2. Original Wage Determination. #OR20220001 Mod 8 10/28/2023.

ADD THE FOLLOWING:

1. Revised Bid Form.

2. Lot # 36 scope of work and drawing.

3. Lot # 37 scope of work.

4. Updated Wage Determination. #OR20230001 Mod 0 01/06/2023.

All other bid documents remain unchanged.

BID FORM Page 1 of 5

BID FORM

BIDDER

ADDRESS

PHONE NUMBER

BID FOR: HACC WIDE FLATWORK PROJECT - PROJECT # 22006

THE HOUSING AUTHORITY OF CLACKAMAS COUNTY

P.O. Box 1510

13900 S. Gain Street

Oregon City OR 97045

TO: Contracting Officer:

1. The undersigned, having familiarized (himself/herself/themselves) with the local conditions affecting the cost of the work, and with the Specifications (including the

Invitation for Bids, Instruction to Bidders (form HUD-5369), this bid, the Form of

Non-collusive Affidavit, the Form of Contract, and the General Conditions

(form HUD-5370), the Special Conditions, the Scope of Work, the Technical

Specifications, and Addenda if any thereto, as prepared by the Housing Authority of

Clackamas County (HACC) and on file in the office of HACC hereby proposes to furnish all labor, materials, equipment, and services required to complete: HACC WIDE

FLATWORK PROJECT, PROECT #22006 all in accordance therewith, for the total sum of ($ ) dollars. (Total from paragraph 9 below)

2. In submitting this bid, it is understood that the right is reserved by the Housing Authority of Clackamas County, Oregon City, Oregon, to reject any and all bids. If written notice of the acceptance of this bid is mailed, telegraphed, or delivered the undersigned within sixty (60) days after the opening thereof, or at any time thereafter before this bid is withdrawn, the undersigned agrees to execute and deliver a contract in the prescribed form within ten (10) days after the contract is presented to Contractor for signature.

3. Security in the sum of __________________________ dollars ($___________) in the form of __________________________________________________ is submitted herewith in accordance with the Specifications.

4. Attached hereto is an affidavit in proof that the undersigned has not entered into any collusion with any person in respect to their proposal or any other proposal or the submitting of proposals for the contract for which this proposal is submitted.

5. The bidder represents that bidder has [ ] has not [ ] participated in a previous contract or subcontract subject to the equal opportunity clause prescribed by Executive Orders

10925, 11114 or 11246 or the Secretary of Labor; that bidder has [ ] has not [ ] filed all required compliance reports, and that representations indicating submission of required

BID FORM Page 2 of 5 compliance reports, signed by proposed subcontractors, will be obtained prior to subcontract awards. (The above representation need not be submitted in connection with contracts or subcontracts which are exempt from the clause.)

6. The bidder represents and agrees [ ] does not agree [ ] as part of this bid that the provisions of ORS 279C.800 to 279C.840 or 40 U.S.C. 276a are to be complied with.

(The above representation need not be submitted in connection with contracts or subcontracts which are exempt from the clause.)

7. The bidder represents that the bidder is [ ] a “Resident Bidder” as defined in

ORS279A.120.

8. Change Orders to the subsequent contract will be approved for labor rates as shown on the attached wage determination or actual wages (as verified by certified payrolls) whichever is greater and materials at contractors cost. All Change Orders will include a maximum addition of 15% for the total Overhead and Profit.

9. The contractor shall complete the following cost breakdown and insert the “Total Bid

Amount” for all work in paragraph 1 above:

BID FORM Page 3 of 5

HACC reserves the right to select any or all of the lots listed above.

10. Contractor to complete the following:

Addendum #1 Addendum #2 Addendum #3 Addendum #4 .

Addendum #5 Addendum # 6 Addendum # 7____ Addendum #8_____

Lot # Unit # Address Type Work Bid Amount

1 #7016 39800 Wolf Drive, Sandy, OR Replacement $

2 #7017 39850 Wolf Drive, Sandy, OR Replacement $

3 #7019 960 Donna Lynn Way, Gladstone, OR Replacement $

4 #7023 10672 SE 77th Avenue, Milwaukie, OR Replacement $

5 #8002 9644 SE 32nd Avenue, Milwaukie, OR Replacement $

6 #8006 39130 Clayton Court, Sandy, OR Replacement $

7 #8007 18375 Dahlager Street, Sandy, OR Replacement $

8 #8008 18718 SE River Road, Milwaukie, OR Replacement $

9 #8013 18728 SE River Road, Milwaukie, OR Replacement $

10 #10004 17116 SE Shadow Court, Milwaukie, OR Replacement $

11 #12002 12775 SE 22nd Avenue, Milwaukie, OR Replacement $

12 #12008 423 Latourette Street, Oregon City, OR Replacement $

13 #12033 809 Buchanan Street, Oregon City, OR Replacement $

14 #12035 3060 SE Park Avenue, Milwaukie, OR Replacement $

15 #19002 1701 SE Windy Lane, Milwaukie, OR Replacement $

16 #19007 13654 SE 64th Avenue, Portland, OR Replacement $

17 #19009 13674 SE 64th Avenue, Portland, OR Replacement $

18 #19015 14540 SE Bunnell Street, Milwaukie, OR Replacement $

19 #20008 5005 SE Britton Avenue, Milwaukie, OR Replacement $

20 #20012 6309 SE Alberta Street, Portland, OR Replacement $

21 #303001 135 E Fairfield Street, Gladstone, OR Replacement $

22 #303010 1316 6th Street, Oregon City, OR Replacement $

23 #304004 4808 SE Hull Street, Milwaukie, OR Replacement $

24 #304011 15323 SE Risley Court, Milwaukie, OR Replacement $

25 #305001 5230 SE Roethe Road, Milwaukie, OR Replacement $

26 #8001 9622 SE 32nd Avenue, Milwaukie, OR Sealcoat/Stripe $

27 #11001 16739 SE Oatfield Road, Milwaukie, OR Sealcoat/Stripe $

28 #21003 18251 SE Addie Street, Milwaukie, OR Sealcoat/Stripe $

29 #21007 4433 SE Roethe Road, Milwaukie, OR Sealcoat/Stripe $

30 #25101 15125 SE 90th Avenue, Clackamas, OR Sealcoat/Stripe $

31 #303014 265 W Arlington Street, Gladstone, OR Sealcoat/Stripe $

32 #304013 4808 SE View Acres Road, Milwaukie, OR Sealcoat/Stripe $

33 #304015 3050 Lazy River Way, West Linn, OR Sealcoat/Stripe $

34 #3060146 146 Molalla Avenue, Oregon City, OR Sealcoat/Stripe $

35 #40001 8930 SE Jannsen Road, Milwaukie, OR Sealcoat/Stripe $

36 #1101 13930 S. Gain Street, Oregon City, OR Replacement $

37 #1096 596 SE D Street, Oregon City, OR Replacement $

Total Bid Amount (Enter this amount at paragraph 1 above)

BID FORM Page 4 of 5

CONTRACTOR BIDDING REQUIREMENTS

1. Submission Requirements:

a. To be considered responsive and responsible, each contractor shall respond to the following requirements. Responses must be specific and complete unto themselves. Any submittal that, in the opinion of HACC, does not fully and completely address these requirements will not be reviewed and bid may be considered non-responsive.

2. Minimum Requirements:

a. To be qualified to respond, contractors must not be debarred, suspended, or otherwise ineligible to contract with HACC, and must not be included on the

General Services Administration’s “List of Parties Excluded From Federal

Procurement and Non-Procurement Programs” or the Department of Housing and

Urban Development’s “Limited Denial of Participation” list. In addition, contractors must have current and active registration in the State of Oregon Business Registry.

3. Similar Project Experience:

a. Describe your firm’s relevant experience within the areas under the Scope of Work. Please describe your firm’s experience as it relates to rehabilitation/modernization projects.

b. Please describe your firm’s specific experience working with Housing Authorities and/or

Public Agencies. Describe in detail two public housing projects that your firm is currently working on and/or has completed in the last five years. Describe the scope of work and dollar value for each project.

c. Please describe your firm’s approach to managing multiple project work sites at any one time, and the firm’s capacity to address competing project timelines.

4. References:

a. Provide (3) references, previous and/or current, including the name and title of the contact person, their mailing address, email address, phone number and fax number. If available, please provide one reference from a public housing authority or other public agency.

5. Firm Description:

a. Provide the firms history, organization and size including number of staff in each work area.

b. Describe the overall staffing approach to be used in connection with this contract. Provide information regarding staff experience and qualifications that demonstrates the contractor’s capacity to perform the required services.

c. Provide the identity of the Project Manager that will be monitoring managing this project.

d. Provide the firms history to complete projects on time by maintaining a weekly progress schedule and completing on budget.

6. Method of Award:

7. HACC will evaluate all bids and award a contract based on contract price and contractors ability to perform said work. The information listed above will be part of the bid evaluation and shall be part of the contractors bid. HACC will award the contract to the

Responsible Bidder submitting the lowest Responsive Bid. Failure to provide the information above may render contractors bid non-responsive.

8. HACC reserves the right to reject any and all bids of any contractor including those who have previously failed to perform properly, or to complete on time, contracts of a similar nature;

who is not in a position to perform the contract, or who has neglected the payment of bills or otherwise disregarded their obligations to subcontractors, material suppliers, or employees.

BID FORM Page 5 of 5

NOTE: The penalty for making false statements is prescribed in 19 U.S.C. 1001.

Date:

(Name of Bidder)

Official Address:

(By: Signature of Bidder)

(Title of Bidder)

Attest:

THE FOLLOWING SIGNED ORIGINAL DOCUMENTS SHALL BE SUBMITTED TO

THE ADDRESS INDICATED ON THE INVITATION TO BID AS PART OF

YOUR BID. THESE ORIGINALS SHALL BE RECEIVED BY HACC PRIOR

TO THE POSTED CLOSING DATE AND TIME

1. Completed form HUD-5369-A - Representations, Certifications and Other Statements of

Bidders

2. Completed Bid Bond

3. Completed Non-Collusive Affidavit

4. Completed Certification: Economic Opportunities for Low and Very-low Income Persons

(Section 3)

5. Completed Disclosure of First Tier Subcontractors (if any) – PRIOR TO 4PM

6. Completed and signed Bid Form.

7. Contractor Bidding Requirements

8. Copy of Current CCB License.

FAILURE TO SUBMIT ALL OF THE ABOVE, BY THE DATE AND TIME REQUIRED, MAY

RENDER YOUR BID NON-RESPONSIVE.

13930 S. Gain Street, Oregon City, OR 97045

Scope of Work

LOT # 36

13930 S. Gain Street, Oregon City, OR 97045 Unit # 1101

The contractor shall provide all labor, materials and permits as necessary to perform the following in accordance with all specifications and drawings:

DRIVEWAY/SITEWORK:

1. R/D concrete curb on East side of main parking area and concrete wheel stops.

2. R/R A/C paving as indicated. Saw cut as required to install new A/C paving and to provide a smooth transition from new to old A/C. Saw cut to be 22’ from East curb. Contractor to remove tree roots as required.

3. R/R 30’ A/C paving section at driveway location. Saw cut as required to install new A/C paving and to provide a smooth transition from new to old A/C. R/R concrete curb on both sides as required to R/R A/C section.

4. Excavate as required to install new 4” base for new A/C driveway. Compact new base to 95%.

5. Install 3” new A/C paving as indicated. Seal and sand saw cut area.

6. Install new concrete wheel stops from removal area.

7. After completion of install contractor to back fill with clean soil to prevent any undermining/abrupt edging.

Power wash clean at completion.

8. Contractor to thoroughly clean remaining section of driveway all the way to the street by pressure washing, wire brushing, scraping, sweeping or as required to remove all moss, grass, dirt, debris, etc. to ensure proper adhesion.

9. Contractor to install new crack sealant on all cracks as required.

10. Contractor to seal coat existing newly cleaned surfaces (old/new).

11. Contractor to paint and stripe to match existing. Verify with HACC as needed.

Contractor to schedule and coordinate work with HACC prior to start. This parking lot is our main office parking and has to be operational during business hours.

NOTE: Work to take place between 8:00am – 5:00pm Monday through Friday.

The contractor shall at all times protect the site, landscaping and building during demolition and construction. Any damage created will be the contractor’s responsibility to repair. The site shall be cleaned of all construction debris at the end of each day.

All work performed, as a result of this procurement shall be conducted in strict accordance with all applicable local, state and federal regulations.

Even if not specifically detailed in the Scope of Work, Drawings or Specifications all work shall be accomplished in accordance with all current building codes.

The contractor shall be responsible for all permits, locates and fees necessary to perform this work.

The contractor and all subcontractors shall read and adhere to all specifications included as part of the Invitation to Bid.

End of Scope of Work

'-0

'-0

'-0

Project N am e:

Job#:

D raw n by:

A ddress:

D ate:

C hecked by:

O f

S heet:

P.O . B

O X 1

S O

U

TH

G A

IN

S

TREET-O

REG

O

N C

ITY, O

R 9

H O

U S

IN

G A

U

TH

O RITY of C

LA

C

KA

M

A S C

O U N

TY

TELEPH

O

N E: (5

) 6

-3

FAX: (5

) 6

-3

H ealth, H ousing

H um an Services C

L A

C K

A M

A S

C O

U N

T Y

S

. G ain S treet O regon C ity, O

R

/3

/2

H A C C

W ide Flatw ork Project

JT

B H

S

ITE PLA

N S C

A

LE: N

TS

596 SE D Street, Oregon City, OR 97045

Scope of Work

LOT # 37

596 SE D Street, Oregon City, OR 97045 Unit # 1096

The contractor shall provide all labor, materials and permits as necessary to perform the following in accordance with all specifications and drawings:

DRIVEWAY/SITEWORK:

1. Excavate as required to install new 4” base for new 36” wide concrete sidewalk. Compact new base to 95%.

2. Install new 4” concrete sidewalk/walkway from rear patio to side parking. Sidewalk shall terminate at the middle of the patio and middle of the side parking area. Contractor to install metal reinforcing as code requires. Install control joints and expansion joints as required. Slope to drain away from building.

3. After completion of install contractor to back fill with clean soil to prevent any undermining/abrupt edging.

Power wash clean at completion.

NOTE: Work to take place between 8:00am – 5:00pm Monday through Friday.

Unit(s) will be occupied during construction and install.

The contractor shall at all times protect the site, landscaping and building during demolition and construction. Any damage created will be the contractor’s responsibility to repair. The site shall be cleaned of all construction debris at the end of each day.

All work performed, as a result of this procurement shall be conducted in strict accordance with all applicable local, state and federal regulations.

Even if not specifically detailed in the Scope of Work, Drawings or Specifications all work shall be accomplished in accordance with all current building codes.

The contractor shall be responsible for all permits, locates and fees necessary to perform this work.

The contractor and all subcontractors shall read and adhere to all specifications included as part of the Invitation to Bid.

End of Scope of Work

1/9/23, 7:52 AM SAM.gov https://sam.gov/wage-determination/OR20230001/0 1/16

"General Decision Number: OR20230001 01/06/2023

Superseded General Decision Number: OR20220001

State: Oregon

Construction Type: Highway

Counties: Oregon Statewide.

HIGHWAY CONSTRUCTION PROJECTS

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $16.20 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2023. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $12.15 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2023. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/06/2023

BROR0001-006 06/01/2020

https://sam.gov/wage-determination/OR20230001/0 2/16

BAKER, BENTON (NORTH), CLACKAMAS, CLATSOP, COLUMBIA, GILLIAM,

HARNEY, HOOD RIVER, LINCOLN (NORTH), LINN (NORTH), MALHEUR

(NORTH), MARION, MORROW, MULTNOMAH, POLK, SHERMAN, TILLAMOOK,

UMATILLA, UNION, WALLOWA, WASCO (NORTH), WASHINGTON AND YAMHILL

COUNTIES

Rates Fringes

BRICKLAYER.......................$ 41.20 22.39

BROR0001-007 06/01/2020

BENTON (SOUTH), CROOK, DESCHUTES, GRANT, JACKSON, JEFFERSON,

KLAMATH, LAKE, LANE, LINCOLN (SOUTH), LINN (SOUTH), MALHEUR

(SOUTH), WASCO (SOUTH) AND WHEELER COUNTIES

Rates Fringes

BRICKLAYER.......................$ 41.20 22.39

CARP9001-001 06/01/2022

ZONE 1:

Rates Fringes

Carpenters:

CARPENTERS..................$ 42.31 19.21

DIVER STANDBY...............$ 58.32 19.21

DIVERS TENDERS..............$ 51.32 19.21

DIVERS......................$ 95.32 19.21

MANIFOLD AND/OR

DECOMPRESSION CHAMBER

OPERATORS...................$ 51.32 19.21

MILLWRIGHTS.................$ 43.26 19.21

PILEDRIVERS.................$ 45.74 19.21

DEPTH PAY:

50 to 100 feet $2.00 per foot over 50 feet 101 to 150 feet 3.00 per foot over 50 feet 151 to 200 feet 4.00 per foot over 50 feet over 220 feet 5.00 per foot over 50 feet

Zone Differential (Add to Zone 1 rates):

Zone 2 - $1.25 Zone 3 - 1.70 Zone 4 - 2.00 Zone 5 - 3.00 Zone 6 - 5.00 Zone 7 - 10.00

ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall

ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall

ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall

ZONE 4 - More than 50 miles and less than 60 miles from the respective City Hall https://sam.gov/wage-determination/OR20230001/0 3/16

ZONE 5 - More than 60 miles and less than 70 miles from the respective City Hall

ZONE 6 - More than 70 miles from the respective City Hall.

ZONE 7 - More than 100 miles from the respective City Hall.

BASEPOINTS CITIES FOR CARPENTERS (EXCLUDING MILLWRIGHTS,

PILEDRIVERS AND DIVERS)

ALBANY ASTORIA BAKER

BEND BROOKINGS BURNS

COOS BAY CORVALLIS EUGENE

GOLDENDALE GRANTS PASS HERMISTON

HOOD RIVER KLAMATH FALLS LAGRANDE

LAKEVIEW LONGVIEW MADRAS

MEDFORD McMINNVILLE NEWPORT

OREGON CITY ONTARIO PENDLETON

PORTLAND PORT ORFORD REEDSPORT

ROSEBURG SALEM ST. HELENS

THE DALLES TILLAMOOK VANCOUVER

BASEPOINTS FOR MILLWRIGHTS

EUGENE NORTH BEND LONGVIEW

PORTLAND MEDFORD THE DALLES

VANCOUVER

BASEPOINTS FOR PILEDRIVERS AND DIVERS

ASTORIA BEND COOS BAY

EUGENE KLAMATH FALLS LONGVIEW

MEDFORD NEWPORT PORTLAND

ROSEBURG SALEM THE DALLES

ELEC0048-006 01/01/2022

CLACKAMAS, CLATSOP, COLUMBIA, HOOD RIVER, MULTNOMAH, TILLAMOOK,

WASCO, WASHINGTON, SHERMAN AND YAMHILL (NORTH) COUNTIES

Rates Fringes

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 53.85 26.54

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

https://sam.gov/wage-determination/OR20230001/0 4/16

ELEC0112-001 06/01/2021

BAKER, GILLIAM, GRANT, MORROW, UMATILLA, UNION, WALLOWA, AND

WHEELER COUNTIES

Rates Fringes

CABLE SPLICER....................$ 52.50 23.01

ELECTRICIAN......................$ 50.00 22.93

ELEC0280-003 01/01/2022

BENTON, CROOK, DESCHUTES, JEFFERSON, LANE (EAST OF A LINE

RUNNING NORTH AND SOUTH FROM THE NORTHEAST CORNER OF COOS

COUNTY TO THE SOUTHEAST CORNER OF LINCOLN COUNTY), LINN,

MARION, POLK AND YAMHILL (SOUTHERN HALF) COUNTIES

Rates Fringes

CABLE SPLICER....................$ 49.51 19.79

ELECTRICIAN......................$ 49.36 20.20

ELEC0291-006 12/01/2021

MALHEUR COUNTY

Rates Fringes

CABLE SPLICER....................$ 37.63 6%+15.40

ELECTRICIAN......................$ 34.21 6%+15.40

ELEC0659-004 01/01/2021

DOUGLAS (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NE

CORNER OF COOS COUNTY TO THE SE CORNER OF LINCOLN COUNTY),

HARNEY, JACKSON, JOSEPHINE, KLAMATH AND LAKE COUNTIES

Rates Fringes

CABLE SPLICER....................$ 59.09 20.22

ELECTRICIAN......................$ 38.49 17.74

ZONE PAY: BASE POINTS ARE FROM THE DOWNTOWN POST OFFICE IN

GRANTS PASS, KLAMATH FALLS, ROSEBURG AND MEDFORD.

ZONE 1: 0-20 MILES $0.00 PER HOUR

ZONE 2: > 20-30 MILES $1.50 PER HOUR

ZONE 3: >30-40 MILES $3.30 PER HOUR

ZONE 4: >40-50 MILES $5.00 PER HOUR

ZONE 5: >50-60 MILES $6.80 PER HOUR

ZONE 6: >60 MILES $9.50 PER HOUR

*THESE ARE NOT MILES DRIVEN. zONES ARE BASED ON DELORNE

STREET ATLAS USA 5.0.

ELEC0932-004 01/01/2022

COOS, CURRY, LINCOLN, DOUGLAS AND LANE COUNTIES (AREA LYING

WEST OF A LINE NORTH AND SOUTH FROM THE N.E. CORNER OF COOS

https://sam.gov/wage-determination/OR20230001/0 5/16

COUNTY TO THE S.E. CORNER OF LINCOLN COUNTY)

Rates Fringes

ELECTRICIAN......................$ 43.97 22.81

ENGI0701-005 01/01/2020

ZONE 1:

POWER EQUIPMENT OPERATORS (See Footnote C)

Rates Fringes

POWER EQUIPMENT OPERATOR

GROUP 1.....................$ 45.90 15.35

GROUP 1A....................$ 48.06 15.35

GROUP 1B....................$ 50.22 15.35

GROUP 2.....................$ 43.99 15.35

GROUP 3.....................$ 42.84 15.35

GROUP 4.....................$ 41.01 15.35

GROUP 5.....................$ 39.77 15.35

GROUP 6.....................$ 36.55 15.35

Zone Differential (add to Zone 1 rates):

Zone 2 - $3.00 Zone 3 - $6.00

For the following metropolitan counties: MULTNOMAH;

CLACKAMAS; MARION; WASHINGTON; YAMHILL; AND COLUMBIA;

CLARK; AND COWLITZ COUNTY, WASHINGTON WITH MODIFICATIONS AS

INDICATED:

All jobs or projects located in Multnomah, Clackamas and Marion Counties, West of the western boundary of Mt. Hood National Forest and West of Mile Post 30 on Interstate 84 and West of Mile Post 30 on State Highway 26 and West of Mile Post 30 on Highway 22 and all jobs or projects located in Yamhill County, Washington County and Columbia County and all jobs or porjects located in Clark & Cowlitz County, Washington except that portion of Cowlitz County in the Mt.

St. Helens ""Blast Zone"" shall receive Zone I pay for all classifications.

All jobs or projects located in the area outside the identified boundary above, but less than 50 miles from the Portland City Hall shall receive Zone II pay for all classifications.

All jobs or projects located more than 50 miles from the Portland City Hall, but outside the identified border above, shall receive Zone III pay for all classifications.

For the following cities: ALBANY; BEND; COOS BAY; EUGENE;

GRANTS PASS; KLAMATH FALLS; MEDFORD; ROSEBURG

All jobs or projects located within 30 miles of the respective city hall of the above mentioned cities shall receive Zone I pay for all classifications.

All jobs or projects located more than 30 miles and less than 50 miles from the respective city hall of the above mentioned cities shall receive Zone II pay for all classifications.

https://sam.gov/wage-determination/OR20230001/0 6/16

All jobs or projects located more than 50 miles from the respective city hall of the above mentioned cities shall receive Zone III pay for all classifications.

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

Group 1 Concrete Batch Plan and or Wet mix three (3) units or more;

Crane, Floating one hundred and fifty (150) ton but less than two hundred and fifty (250) ton; Crane, two hundred

(200) ton through two hundred ninety nine (299) ton with two hundred foot (200') boom or less (including jib, inserts and/or attachments); Crane, ninety (90) ton through one hundred ninety nine (199) ton with over two hundred (200') boom Including jib, inserts and/or attachments);

Crane, Tower Crane with one hundred seventy five foot (175') tower or less and with less than two hundred foot (200') jib; Crane, Whirley ninety (90) ton and over;

Helicopter when used in erecting work

Group 1A Crane, floating two hundred fifty (250) ton and over; Crane, two hundred (200) ton through two hundred ninety nine

(299) ton, with over two hundred foot (200') boom (including jib, inserts and/or attachments); Crane, three hundred (300) ton through three hundred ninety nine (399) ton; Crane, Tower Crane with over one hundred seventy five foot (175') tower or over two hundred foot (200') jib;

Crane, tower Crane on rail system or 2nd tower or more in work radius

Group 1B

Crane, three hundred (300) ton through three hundred ninety nine (399) ton, with over two hundred foot (200') boom (including jib, inserts and/or attachments); Floating crane, three hundred fifty (350) ton and over; Crane, four hundred (400) ton and over

Group 2 Asphalt Plant (any type); Asphalt Roto-Mill, pavement profiler eight foot (8') lateral cut and over; Auto Grader or ""Trimmer""; Blade, Robotic; Bulldozer, Robotic Equipment (any type); Bulldozer, over one hundred twenty thousand (120,000) lbs. and above; Concrete Batch Plant and/or Wet Mix one (1) and two (2) drum; Concrete Diamond Head Profiler; Canal Trimmer; Concrete, Automatic Slip Form Paver (Assistant to the Operator required); Crane, Boom Truck fifty (50) ton and with over one hundred fifty foot (150') boom and over; Crane, Floating (derrick barge) thirty (30) ton but less than one hundred fifty (150) ton;

Crane, Cableway twenty-five (25) ton and over; Crane, Floating Clamshell three (3) cu. Yds. And over; Crane, ninety (90) ton through one hundred ninety nine (199) ton up to and including two hundred foot (200') of boom (including jib inserts and/or attachments); Crane, fifty

(50) ton through eighty nine (89) ton with over one hundred fifty foot (150') boom (including jib inserts and/or attachments); Crane, Whirley under ninety (90) ton; Crusher Plant; Excavator over one hundred thirty thousand (130,000) lbs.; Loader one hundred twenty thousand (120,000) lbs. and above; Remote Controlled Earth Moving Equipment; Shovel, Dragline, Clamshell, five (5) cu. Yds. And over; Underwater Equipment remote or otherwise, when used in construction https://sam.gov/wage-determination/OR20230001/0 7/16 work; Wheel Excavator any size

Group 3 Bulldozer, over seventy thousand (70,000) lbs. up to and including one hundred twenty thousand (120,000) lbs.;

Crane, Boom Truck fifty (50) ton and over with less than one hundred fifty foot (150') boom; Crane, fifty (50) ton through eighty nine (89) ton with one hundred fifty foot (150') boom or less (including jib inserts and/or attachments); Crane, Shovel, Dragline or Clamshell three

(3) cu. yds. but less than five (5) cu. Yds.; Excavator over eighty thousand (80,000) lbs. through one hundred thirty thousand (130,000) lbs.; Loader sixty thousand (60,000) lbs. and less than one hundred twenty thousand (120,000) lbs.

Group 4

Asphalt, Screed; Asphalt Paver; Asphalt Roto-Mill, pavement profiler, under eight foot (8') lateral cut; Asphalt, Material Transfer Vehicle Operator; Back Filling Machine;

Backhoe, Robotic, track and wheel type up to and including twenty thousand (20,000) lbs. with any attachments; Blade (any type); Boatman; Boring Machine; Bulldozer over twenty thousand (20,000) lbs. and more than one hundred (100) horse up to seventy thousand (70,000) lbs.; Cable-Plow (any type); Cableway up to twenty five (25) ton; Cat Drill (John Henry); Chippers; Compactor, multi-engine; Compactor, Robotic; Compactor with blade self-propelled; Concrete, Breaker; Concrete, Grout Plant; Concrete, Mixer Mobile;

Concrete, Paving Road Mixer; Concrete, Reinforced Tank Banding Machine; Crane, Boom Truck twenty (20) ton and under fifty (50) ton; Crane, Bridge Locomotive, Gantry and Overhead; Crane, Carry Deck; Crane, Chicago Boom and similar types; Crane, Derrick Operator, under one hundred

(100) ton; Crane, Floating Clamshell, Dragline, etc.

Operator, under three (3) cu. yds. Or less than thirty (30) ton; Crane, under fifty (50) ton; Crane, Quick Tower under one hundred foot (100') in height and less than one hundred fifty foot (150') jib (on rail included); Diesel-Electric Engineer (Plant or Floating); Directional Drill over twenty thousand (20,000) lbs. pullback; Drill Cat Operator; Drill Doctor and/or Bit Grinder; Driller, Percussion, Diamond, Core, Cable, Rotary and similar type; Excavator Operator over twenty thousand (20,000) lbs. through eighty thousand (80,000) lbs.; Generator Operator; Grade-all; Guardrail Machines, i.e. punch, auger, etc.; Hammer Operator (Piledriver); Hoist, stiff leg, guy derrick or similar type, fifty (50) ton and over; Hoist, two (2) drums or more; Hydro Axe (loader mounted or similar type); Jack Operator, Elevating Barges, Barge Operator, self-unloading;

Loader Operator, front end and overhead, twenty five thousand (25,000) lbs. and less than sixty thousand (60,000) lbs.; Log Skidders; Piledriver Operator (not crane type); Pipe, Bending, Cleaning, Doping and Wrapping Machines; Rail, Ballast Tamper Multi-Purpose; Rubber-tired Dozers and Pushers; Scraper, all types; Side-Boom; Skip Loader, Drag Box; Strump Grinder (loader mounted or similar type); Surface Heater and Planer; Tractor, rubber-tired, over fifty (50) HP Flywheel; Trenching Machine three foot (3') depth and deeper; Tub Grinder (used for wood debris);

Tunnel Boring Machine Mechanic; Tunnel, Mucking Machine;

Ultra High Pressure Water Jet Cutting Tool System Operator;

Vacuum Blasting Machine Operator; Water pulls, Water wagons https://sam.gov/wage-determination/OR20230001/0 8/16

Group 5

Asphalt, Extrusion Machine; Asphalt, Roller (any asphalt mix); Asphalt, Roto-Mill pavement profiler ground man;

Bulldozer, twenty thousand (20,000) lbs. or less, or one hundred (100) horse or less; Cement Pump; Chip Spreading Machine; Churn Drill and Earth Boring Machine; Compactor, self-propelled without blade; Compressor, (any power) one thousand two hundred fifty (1,250) cu. ft. and over, total capacity; Concrete, Batch Plant Quality control; Concrete, Combination Mixer and compressor operator, gunite work;

Concrete, Curb Machine, Mechanical Berm, Curb and/or Curb and Gutter; Concrete, Finishing Machine; Concrete, Grouting Machine; Concrete, Internal Full Slab Vibrator Operator;

Concrete, Joint Machine; Concrete, Mixer single drum, any capacity; Concrete, Paving Machine eight foot (8') or less;

Concrete, Planer; Concrete, Pump; Concrete, Pump Truck;

Concrete, Pumpcrete Operator (any type); Concrete, Slip Form Pumps, power driven hydraulic lifting device for concrete forms; Conveyored Material Hauler; Crane, Boom Truck under twenty (20) tons; Crane, Boom Type lifting device, five (5) ton capacity or less; Drill, Directional type less than twenty thousand (20,000) lbs. pullback; Fork Lift, over ten (10) ton or Robotic; Helicopter Hoist; Hoist Operator, single drum; Hydraulic Backhoe track type up to and including twenty thousand (20,000) lbs.; Hydraulic Backhoe wheel type (any make); Laser Screed; Loaders, rubber-tired type, less than twenty five thousand (25,000) lbs.; Pavement Grinder and/or Grooving Machine (riding type); Pipe, cast in place Pipe Laying Machine; Pulva-Mixer or similar types; Pump Operator, more than five (5) pumps (any size); Rail, Ballast Compactor, Regulator, or Tamper machines; Service Oiler (Greaser); Sweeper Self-Propelled;

Tractor, Rubber-Tired, fifty (50) HP flywheel and under;

Trenching Machine Operator, maximum digging capacity three foot (3') depth; Tunnel, Locomotive, Dinkey; Tunnel, Power Jumbo setting slip forms, etc.

Group 6

Asphalt, Pugmill (any type); Asphalt, Raker; Asphalt, Truck Mounted Asphalt Spreader, with Screed; Auger Oiler;

Boatman; Bobcat, skid steed (less than one (1) yard);

Broom, self-propelled; Compressor Operator (any power) under 1,250 cu. ft. total capacity; Concrete Curing Machine (riding type); Concrete Saw; Conveyor Operator or Assistant; Crane, Tugger; Crusher Feederman; Crusher Oiler;

Deckhand; Drill, Directional Locator; Fork Lift; Grade Checker; Guardrail Punch Oiler; Hydrographic Seeder Machine, straw, pulp or seed; Hydrostatic Pump Operator;

Mixer Box (CTB, dry batch, etc.); Oiler; Plant Oiler; Pump (any power); Rail, Brakeman, Switchman, Motorman; Rail, Tamping Machine, mechanical, self-propelled; Rigger; Roller grading (not asphalt); Truck, Crane Oiler-Driver

IRON0029-004 07/04/2022

Rates Fringes

IRONWORKER.......................$ 41.62 31.72

LABO0737-001 06/01/2022

Rates Fringes https://sam.gov/wage-determination/OR20230001/0 9/16

Mason Tender/Hod Carrier Tenders to Bricklayers, Tile Setters, Marble Setters and Terrazzo Workers, Topping for Cement Finishers and Mortar Mixers...............$ 38.79 16.85

LABO0737-008 06/01/2022

ZONE 1:

LABORERS (SEE FOOTNOTE C)

Rates Fringes

Laborers:

GROUP 1.....................$ 34.98 16.85

GROUP 2.....................$ 36.25 16.85

GROUP 3.....................$ 30.38 16.85

Zone Differential (Add to Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 2.00 Zone 4 - 3.00 Zone 5 - 5.00

ZONE 1 - All jobs or projects located within 30 miles of the respective City Hall

ZONE 2 - More than 30 miles and less than 40 miles from the respective City Hall

ZONE 3 - More than 40 miles and less than 50 miles from the respective City Hall

ZONE 4 - More than 50 miles and less than 80 miles from the respective City Hall

ZONE 5 - More than 80 miles from the respective City Hall.

BASEPOINTS:

ALBANY ASTORIA BAKER CITY

BEND BURNS COOS BAY

EUGENE GRANTS PASS HERMISTON

KLAMATH FALLS MEDFORD PENDLETON

PORTLAND ROSEBURG SALEM

THE DALLES

LABORER CLASSIFICATIONS

GROUP 1: Applicator (including Pot Tender for same) applying protective material by hand or nozzle on utility lines or storage tanks on project, Asphalt Plant; Asphalt Spreader;

Batch Weighman; Broomers; Brush Burners and Cutters; Choker Setter; Choker Splicer; Clary Power Spreader; Clean-up Laborer; Clean up Nozzleman (concrete, rock, etc);

Concrete Laborer; Crusher Feeder; Curing, Concrete;

Demolition, wrecking, and moving; Dopping and Wrapping Pipe; Dumpman (for Grading Crew); Erosion Control Specialist; Fine Graders; Fence Builders; Form Strippers;

Guard Rail, Median Rail, Barriers, Reference Post, Guide Post, Right of Way Marker; Remote Control (Dry Pack Machine, Jackhammer, Chipping Guns, Compaction, Paving https://sam.gov/wage-determination/OR20230001/0 10/16

Breakers, Hand Held Concrete Saw, Demo Saw, Core Drill);

Precast Concrete Setter; Pressure Washer; Railroad Track Laborer; Ribbon Setter; Rip Rap Map; Sand Blasting (Wet);

Scaffold Tender; Self Propelled Concrete Buggy; Sewer Laborer; Sign Erector; Signalman; Scissor and Manlift;

Skipman; Slopers; Sprayman; Stake Chaser; Stake Setter;

Tamper; Timber Faller and Bucker; Tool Operators (Hand Held, Walk Behind)

GROUP 2: Asbestos Removal; Asphalt Rakers, Bit Grinder, Concrete Core Drill, Concrete Pump Nozzleman, Concrete Saw Operator (Walk Behind, Walk Saw, Rail Mounted, Wire); Drill Operator; Grade Checker; Gunite Nozzleman; Hazardous Waste Laborer; High Scalers; Laser Bean (Pipe Laying); Loop Installation; Manhole Builder; Mold Remediation Laborer;

Nippers and Timberman; Pipelayer; Powderman; Power Saw Operators (Bucking and Falling); Pumpcrete Nozzleman; Sand Blasting (Dry); Sewer Timberman; Tugger Operator;

Vibrators; Water Blaster

GROUP 3: Final Clean-up(detailed clean-up, limited to cleaning up floors, ceilings, walls, windows-prior to acceptance by the owner); Fire Watch; Landscaper; Traffic Flagger

FOOTNOTE C:

HANDLING OF HAZARDOUS WAST MATERIALS - Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:

H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.

H-2 Class ""C"" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.

H-3 Class ""B"" Suit - Basic hourly wage rate plus $1.50 per hour, fringes plus $0.15.

H-4 Class ""A"" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.

PAIN0055-002 07/01/2019

Rates Fringes

PAINTER

HIGHWAY & PARKING LOT

STRIPER.....................$ 35.45 12.56

PAIN0055-033 07/01/2020

Rates Fringes

PAINTER

Area 1: CLACKAMAS, https://sam.gov/wage-determination/OR20230001/0 11/16

CLATSOP, COLUMBIA,

GILLIAM, HOOD RIVER,

MARION, MULTNOMAH, MORROW,

POLK, SHERMAN, TILLAMOOK,

UMATILLA, UNION, WALLOWA,

WASCO, WASHINGTON, and YAMHILL Counties Painters...................$ 27.14 13.34 Area 2: BAKER, BENTON, CROOK, DESCHUTES, GRANT, HARNEY, JEFFERSON, LAKE, LANE, LINN, LINCOLN, MALHEUR, and WHEELER Counties Painters...................$ 24.14 13.34 Area 3: COOS, CURRY, DOUGLAS, JACKSON, JOSEPHINE, and KLAMATH Counties Painters...................$ 22.14 13.34

All high work over 60 ft. = base rate + $0.75

PLAS0555-001 07/01/2020

ZONE 1:

Rates Fringes

Cement Masons: (ZONE 1)

CEMENT MASONS DOING BOTH

COMPOSITION/POWER

MACHINERY AND

SUSPENDED/HANGING SCAFFOLD..$ 37.32 19.42

CEMENT MASONS ON

SUSPENDED, SWINGING AND/OR

HANGING SCAFFOLD............$ 36.58 19.42

CEMENT MASONS...............$ 35.52 19.42

COMPOSITION WORKERS AND

POWER MACHINERY OPERATORS...$ 36.58 19.42

Zone Differential (Add To Zone 1 Rates):

Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 3.00

BASE POINTS: BEND, CORVALLIS, EUGENE, MEDFORD, PORTLAND,

SALEM, THE DALLES, VANCOUVER

ZONE 1: Projects within 30 miles of the respective city hall

ZONE 2: More than 30 miles but less than 40 miles from the respective city hall.

ZONE 3: More than 40 miles but less than 50 miles from the respective city hall.

ZONE 4: More than 50 miles but less than 80 miles from the respective city hall.

ZONE 5: More than 80 miles from the respective city hall

TEAM0037-004 06/01/2020

https://sam.gov/wage-determination/OR20230001/0 12/16

ZONE 1:

TRUCK DRIVERS (See Footnote C):

Rates Fringes

Truck drivers:

GROUP 1.....................$ 29.08 16.40

GROUP 2.....................$ 29.20 16.40

GROUP 3.....................$ 29.34 16.40

GROUP 4.....................$ 29.62 16.40

GROUP 5.....................$ 29.85 16.40

GROUP 6.....................$ 30.03 16.40

GROUP 7.....................$ 30.24 16.40

Zone Differential (add to Zone 1 rates):

Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 2.75

Zone 1 - All jobs or projects located within 30 miles of the respective City Hall

Zone 2 - More than 30 miles and less than 40 miles from the respective City Hall

Zone 3 - More than 40 miles and less than 50 miles from the respective City Hall

Zone 4 - More than 50 miles and less than 80 miles from the respective City Hall

Zone 5 - More than 80 miles from the respective City Hall

BASEPOINTS:

ALBANY ASTORIA BAKER

BEND BINGEN BROOKINGS

BURNS COOS BAY CORVALLIS

EUGENE GOLDENDALE GRANTS PASS

HERMISTON HOOD RIVER KLAMATH FALLS

LAGRANDE LAKEVIEW LONGVIEW

MADRAS MEDFORD MCMINNVILLE

OREGON CITY NEWPORT ONTARIO

PENDLETON PORTLAND PORT ORFORD

REEDSPORT ROSEBURG SALEM

THE DALLES TILLAMOOK VANCOUVER

TRUCK DRIVER CLASSIFICATIONS

GROUP 1: A-frame or hydra-lift truck w/load bearing surface;

Articulated dump truck; Battery rebuilders; Bus or manhaul driver; Concrete buggies (power operated); Concrete pump truck; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: up to and including 10 cu. yds.; Lift jitneys, fork lifts (all sizes in loading, unloading and transporting material on job site); Loader and/or leverman on concrete dry batch plant (manually operated); Lubrication man, fuel truck driver, tireman, wash rack, steam cleaner or combination; Pilot car; Pickup truck; Slurry truck driver or leverman; Solo flat bed and misc. body truck, 0-10 tons; Team drivers;

Tireman; Transit mix and wet or dry mix trucks: 5 cu yds.

and under; Water wagons (rated capacity) up to 3,000 gallons https://sam.gov/wage-determination/OR20230001/0 13/16

GROUP 2: Boom truck/hydra-lift or retracting crane;

Challenger; Dumpsters or similar equipment-all sizes; Dump trucks/articulated dumps 6 cu to 10 cu.; Flaherty spreader driver or leverman; Low bed equipment, flat bed semi-truck and trailer or doubles transporting equipment or wet or dry materials; Lumber carrier, driver-straddle carrier (used in loading, unloading and transporting of materials on job site); Oil distributor driver or leverman; Transit mix and wet or dry mix trucks: over 5 cy yds and including 7 cu.

yds; Vacuum trucks; Water Wagons (rated capacity) over 3,000 to 5,000 gallons

GROUP 3: Ammonia nitrate distributor driver; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 10 cu. yds. and including 30 cu. yds., includes articulated dump trucks;

Self-Propelled street sweeper; Transit mix and wet or dry mix trucks, over 7 cu. yds. and including 11 cu. yds.;

truck mechanic-Welder-Body repairman; Utility and clean-up truck; Water wagons (rated capacity) 5,000 to 10,000 gallons.

GROUP 4: Asphalt Bruner; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 30 cu. yds. and including 50 cu. yds.

includes articulated dump trucks; Fire guard; Transit Mix and Wet or Dry Mix Trucks, over 11 cu. yds. and including 15 cu. yds.; Water Wagon (rated capacity) over 10,000 gallons to 15,000 gallons

GROUP 5: Composite Crewman; Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 50 cu. yds. and including 60 cu. yds., includes articulated dump trucks

GROUP 6: Bulk cement spreader w/o auger; Dry Pre-Batch concrete mix trucks; Dump trucks, side, end and bottom dumps, including semi-trucks and trains of combinations thereof: over 60 cu. yds. and including 80 cu. yds. and includes articulated dump trucks; Skid truck

GROUP 7: Dump trucks, side, end and bottom dumps, including semi-trucks and trains or combinations thereof: over 80

cu. yds. and including 100 cu. yds. includes articulated dump trucks; Industrial lift truck (mechanical tailgate)

FOOTNOTE C:

HANDLING OF HAZARDOUS WAST MATERIALS -(LABORERS, POWER

EQUIPMENT OPERATORS, AND TRUCK DRIVERS): Personnel in all craft classifications subject to working inside a federally designated Hazardous Waste perimeter shall be eligible for compensation in accordance with the following group schedule relative to the level of Hazardous Waste as outline in the specific Hazardous Waste Project Site Safety Plan:

H-1 Base Wage Rate when on a hazardous waste site when not outfitted with protective clothing.

H-2 Class ""C"" Suit - Basic hourly wage rate plus $1.00 per hour, fringes plus $0.15.

H-3 Class ""B"" Suit - Basic hourly wage rate plus $1.50 per https://sam.gov/wage-determination/OR20230001/0 14/16 hour, fringes plus $0.15.

H-4 Class ""A"" Suit -Basic hourly wage rate plus $2.00 per hour, fringes plus $0.15.

SUOR1991-003 04/01/1991

Rates Fringes

Timber Sales Roads:

LABORERS....................$ 8.35 ** 4.30

OPERATING ENGINEERS.........$ 10.37 ** 4.15

POWER SAW, DRILLER,

POWDERMAN...................$ 9.12 ** 4.30

TEAMSTERS...................$ 9.74 ** 3.74

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

** Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($16.20) or 13658 ($12.15). Please see the Note at the top of the wage determination for more information.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

https://sam.gov/wage-determination/OR20230001/0 15/16

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

https://sam.gov/wage-determination/OR20230001/0 16/16

* an existing published wage determination

* a survey underlying a wage determination

* a…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .