Addendum 1 _ Field of Hope Turf Replacement P.pdf

City of Peachtree City 151 Willowbend Road Peachtree City, GA 30269 Phone: 770-631-2515 Fax: 770-631-2507 PeachtreeCityGA.gov Purchasing Department

CITY OF PEACHTREE CITY

FIELD OF HOPE TURF REPLACEMENT PROJECT

24-105BRS

ADDENDUM #1

CLARIFICATION: Staff expects work to begin in late May/early June.

CLARIFICATION: Contractor may use a portion of the fenced-in city property adjacent to the Field of Hope for some storage – with approval from the project manager.

QUESTION: Will the city provide a dump site?

CITY’S RESPONSE: No. Contractor is responsible for proper disposal of all waste.

CLARIFICATION: Sprinturf submitted supporting documentation for staff to consider UltraBlade DFE Extreme as an acceptable alternative. After consideration, staff has approved this request with the following conditions:

• Backing material as specified in the invitation for bids document must be used and

• Product will be wheelchair friendly.

27 February 2024 Attachments DPS for DFE Extreme Lisport Comparison Test summary

Sprinturf has the most dual fiber fields in the nation.

DFE Extreme fields feature a 330 micron plus monofilament and a 120 micron plus slit film. Exclusively made in-house and in America.

The combination of monofilament and parallel-fibrillated fibers interlock to nearly eliminate infill flyout – a common complaint amongst athletes, coaches, and parents. The available two color configuration provides stunning aesthetics.

Sprinturf DFE Extreme fields feature two unique polymer technologies. State of the art C8 monofilament resins from Dow and Nova are married to a proprietary metallacene slit film resin from Exxon. The combined product featuring the greatest polymer suppliers in the world provide unmatched durability with exceptional resilience, playability, and safety.

The information provided above represents the stan-dard characteristics for the named product. If required this product can be manufac-tured to meet alternative specification requirements within our manufacturing tolerances. The above refer-enced data and supporting reports apply only to the sample tested and are not necessarily indicative of the qualities of apparently iden-tical or similar products.

D F E E X T R E M E

SLIT-FILM / MONOFILAMENT

TOLL FREE: 877-686-887

FAX: 843-410-5712

146 FAIRCHILD STREET, SUITE 150,

DANIEL ISLAND, SC 29492

ultrablade™

S P EC I F I C AT I O N S

Fiber

Fiber Supplier

Fiber Denier

Fiber Thickness

Pile Height

Face Weight

Primary Backing

Primary Backing Weight

Secondary Backing

Secondary Backing Weight

Total Weight (w/o infill)

Tufting Gauge

Tuft Bind

Permeability

Infill Options

G Max Warranty

AVAILABLE WITH OR WITHOUT THATCH ZONE

History

• In business since 1998

• Zero Fiber Failures

• Most fields in ground greater than 10 years*

• Most dual-fiber fields in the U.S.A.

• Most 100% rubber infill fields in the U.S.A.

Technology

• C8 monofilament resins from Dow and Nova are married to a proprietary metallacene slit film resin from Exxon

• Available with Cool Fiber

• Introducing new Shark-Tooth fibrillation

• Introducing new patent-pending, no-perforation urethane coating with 2x drainage

Durability

• 100K cycles on the Lisport

• 120 micron slit / 330 micron monofilament fibers for maximum durability

• Most dual-fiber fields in ground since 2007

Risk Mitigation

• The only North American turf company with 100% of fibers made in-house and in the U.S.A. (Fiber failure is the primary cause of field failures)

• The only North American turf company with vertically integrated fiber manufacturing, tufting, coating and installation

• The only turf company that is 100% American owned, 100% invested in America and has a 100% American workforce

Lisport Testing

• No splitting or cracking

• Excellent resiliency

Manufacturing

• State-of-the-art Starlinger, Reimotec and

Barmag extruders

• High-speed tufting machines

• Dedicated urethane coater

• Texturized thatch capability

*as percent of installed base

E X T R U S

IO

N T U F T

IN

G

WHY SPRINTURF ®

MANUFACTURING FACILITY

PO Box 2041 Dalton, GA 30722-2041

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

TEST REPORT

CLIENT:

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018 Report Date: 4/12/2018 Requested By: Bryan Wagoner Page: 1 of 8

TEST MATERIAL:

Material Type: Synthetic Turf Date Received: 2/21/2018 Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

Product ID: DFE 46 2.25” Infill System: 100% Ambient 10/20 SBR Crumb Rubber

TESTING METHODS REQUESTED:

Testing Services, Inc was instructed by the client to perform the following testing:

Standard: FIFA Section 17 Test Method: Procedure for Simulated Mechanical Abrasion Standard: EN 15336 Test Method: Surface for Sports Area, Exposure for Synthetic Turf to Simulated Wear (LiSport)

PRINCIPLE:

This procedure simulates high levels of athletic use of the synthetic turf in an accelerated period of time under laboratory conditions. Two studded rollers were traversed to and fro over the infilled turf to produce mechanical action of the surface that occurs during normal use. This report details the effects of this mechanical action as it relates to degradation of the pile fiber.

The client, Sprinturf, commissioned TSi to evaluate simulated wear of submitted finished synthetic turf, referenced above, with the use of an infill system.

There was no underlayment or shock pad used for test.

The results are indicative of mechanical wear only and do not take into account the effects of weathering, uv degradation, or use of the turf outside of competition.

PROCEDURE:

A test specimen, 800mmX400mm, was cut from the sample lot to be exposed to mechanical abrasion to a Lisport Linear Abrader equipped with 145 studs per cylinder and linear speed of movement (to and fro) of 0.25 ms geared so that one roller is 40% faster than the other. The design of the machine ensures that the studs do not repeatedly impact the same spots.

The test specimen was mounted into the sample tray. The rollers were adjusted to ensure full stud contact with the pile surface. The Lisport was then activated for 100,000 total cycles. The Lisport was stopped every 5,000 cycles and the pile fiber degradation was graded, the surface re-groomed, and displaced infill was reinstalled.

DEVIATION FROM TEST METHOD:

State reason for any deviation from, additions to, or exclusions from test method:

None

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 2 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

TEST RESULTS:

A scale of 1 to 5 was used for descriptive evaluation of the pile fibers due to the effect of mechanical wear (Lisport) at each 5,000 cycle interval.

The following is an explanation of the scale:

Rating Description

1.0 None or Negligible

2.0 Slight

3.0 Moderate

4.0 Considerable

5.0 Severe

The following was rated using the referenced rating scale: tuft loss, pile flattening, fiber splitting, and infill dispersion.

# of Cycles Infill Dispersion Tuft Loss Pile Flattening Fiber Splitting

5,000 1 2 1 1 10,000 1 2 1 1 15,000 1 2 1 1 20,000 1 2 1 1 25,000 1 2 1 1 30,000 1 2 1 1 35,000 1 2 1 1 40,000 1 2 1 1 45,000 1 2 1 1 50,000 1 2 1 1 55,000 1 2 1 1 60,000 1 2 1 1.5 65,000 1 2 1 1.5 70,000 1 2 1 1.5 75,000 1 2 2 1.5 80,000 1 2 2 2 85,000 1 2 2 2 90,000 1 2 2 2.5 95,000 1 2 2 2.5

100,000 1 2 2 2.5

CONCLUSION: The exposed test specimen was returned to the client.

Based on the following “typical” use of the turf: 40 hours/per week, 50 weeks/per year or 2,000 hrs. of athletic competition, the Lisport wear would indicate at 100,000 cycles the equivalency of 50 years wear.

Infill dispersion was very negligible for the test duration. Tuft Loss/Tuft Pullout from the backing was slight for the test duration.

Pile flattening was very negligible for the first 70,000 cycles, and became slight for the test duration.

Fiber splitting was very negligible for the first 55,000 cycles, and was very slight after 75,000 cycles. Splitting was then slight up to 85,000 cycles, and became very moderate for the test duration.

Note: Testing Services Inc is neither accredited nor endorsed by FIFA. The above test was conducted using a FIFA test guideline. Results should be used for R&D purposes only. This report is not a formal FIFA laboratory report and does not conform or imply FIFA type approval of this product

Reported and Approved By:

Erle Miles, III Lab Director, VP, Testing Services Inc

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 3 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

APPENDIX A: Overall View Fibers

No Exposure

After 5,000 Lisport Cycles

After 10,000 Lisport Exposure

After 15,000 Lisport Cycles

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 4 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

After 20,000 Lisport Cycles After 25,000 Lisport Cycles

After 30,000 Lisport Exposure

After 35,000 Lisport Cycles

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 5 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

After 40,000 Lisport Cycles After 45,000 Lisport Cycles

After 50,000 Lisport Exposure

After 55,000 Lisport Cycles

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 6 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

After 60,000 Lisport Cycles After 65,000 Lisport Cycles

After 70,000 Lisport Exposure

After 75,000 Lisport Cycles

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 7 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

After 80,000 Lisport Cycles After 85,000 Lisport Cycles

After 90,000 Lisport Exposure

After 95,000 Lisport Cycles

(706) 226-1400 tsioffice@optilink.us

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL.

OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

Company: Sprinturf Report Number: 73513 Address: 550 Long Point Rd Suite 205 Lab Test Number: 2994-5588 Mt Pleasant, SC 29464 Test Completion Date: 4/11/2018

Requested By: Bryan Wagoner Page: 8 of 8

Material Condition: EXCELLENT: XXX GOOD: POOR: REJECTED:

After 100,000 Lisport Cycles

*END OF REPORT

Pile Yarn Method Polethelene Monofilament/Slit Film Sprinturf Linear Density (Denier) ASTM D 1577 7,200/5,000 10,800/5,000 Yarn Thickness Mono/Slit ASTM D 3128 N/A 330 micron / 120 micron Pile Weight ASTM D 5848 40 Oz/yd2 42 Oz/yd2 Finished Pile Height ASTM D 5823 1.75" 1.75" Product Weight (total) ASTM D 5848 68 OZ/yd2 70.5 OZ/yd2 Primary Backing Weight ASTM D 5848 8 Oz/yd2 8.5 Oz/yd2 Secondard Coating Weight ASTM D 5848 N/A 20 Oz/yd2 Fabric Width ASTM D 5793 N/A 15' Tuft Gauge ASTM D 5793 N/A 1/2" Grab Tear Strength Avg ASTM D 5034 > 200 lb-F > 200 lb-F Tuft Bind (avg) ASTM D 1335 >10 lb -F >10 lb -F Infiltrometer ASTM D 3885 > 25 > 25 www.testingservices.us ▪ (706)226-1400 office@testingservices.us

Testing Services (TSI) LLC 817 Showalter Avenue PO Box 1343 Dalton, GA 30721

Report # Lab Test Number:

Report Date:

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL. OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

CLIENT: TEST MATERIAL:

Company: Sprinturf Date Material Received: February 3, 2023 Address: 146 Fairchild Street Material Type: Synthetic Turf Suite 150 Material Condition: Excellent, New Daniel Island, SC 29492 Material ID: 42 oz DFE 2.0”

Test Overview: Testing Services was instructed by the client to perform fiber, construction, and performance analysis on a submitted finished synthetic turf roll identified as: 42 oz DFE 2.0” in accordance with ASTM, EN, FIFA, or other accredited test methods outlined in the project specification.

Test Methods:

Standard: ASTM D7138 Test Method: Standard Test Method for Determination of Melting Temperatures of Synthetic Fibers (Fiber ID) Standard: ASTM D1907 Test Method: Standard Test Method for Liner Density of Yarn by the Skein Method (Yarn Denier) Standard: ASTM D3218 Test Method: Standard Test Method for Specification of Polyolefin Monofilaments (Ribbon Thickness& Width) Standard: ASTM D2256 Test Method: Standard Test Method for Tensile Properties of Yarns by the Single Strand Method (Yarn Breaking Strength/Elongation) Standard: ASTM F2765 Test Method: Standard Specification for Total Lead Content in Synthetic Turf Fibers (Lead Content) Standard: ASTM D5848 Test Method: Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings (Weights: Total, Face, Primary, Secondary) Standard: ASTM D5823 Test Method: Standard Test Method for Tuft Height of Pile Floor Coverings (Tuft Height above Backing) Standard: ASTM D5793 Test Method: Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floorcoverings (Stitch & Gauge Count) Standard: TSI Internal Test Method: Perforation Spacing and Diameter (Drainage Hole Diameter and Spacing) Standard: ASTM D1335 Test Method: Standard Test Method for Tuft Bind Strength of Pile Yarn Floor Coverings (Tuft Lock) Standard: ASTM D5034 Test Method: Standard Test Method for Breaking Strength of Textile Fabrics (Grab Tear Strength) Standard: ASTM F1551 Test Method: Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials: Suffix-

DIN 18-035, Part 6: Water Permeability of Synthetic Turf Systems and Permeable Bases (Water Permeability) Standard: ASTM D2859 Test Method: Standard Test Method for Ignition Characteristics of Finished Textile Pile Yarn Floorcoverings (Pill Flammability) Standard: ASTM F1015 Test Method: Standard Test Method for Relative Abrasiveness Index of Synthetic Turf Playing Surfaces (Abrasiveness)

Test Results:

Yarn Analysis

Method Test Description Test Result 10,000 Slit Film 10,800 Monofilament

ASTM D7138 Method 2 Fiber Melt Point, Identification 120°C Polyethylene 119°C Polyethylene

ASTM D1907 Denier 10,248 10,849

ASTM D3218

Ribbon Thickness 128 microns 312 microns Ribbon Width 0.361” 0.043” X 6 ends

ASTM D2256

Average Yarn Breaking Strength 35.7 lbs/force 17.0 lbs/force Average Yarn Elongation @ Break 112.6 % 227.7 %

ASTM F2765 Total Lead Content 10.3 mg/Kg 1.44 mg/Kg

LABORATORY TEST REPORT

TEST SUMMARY

90930 3354-3210

February 16, 2023 www.testingservices.us ▪ (706)226-1400 office@testingservices.us

Testing Services (TSI) LLC 817 Showalter Avenue PO Box 1343 Dalton, GA 30721

Report # Lab Test Number:

Report Date:

OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL. OUR REPORTS, LETTERS, NAME, SEALS, OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC.

CLIENT: TEST MATERIAL:

Company: Sprinturf Date Material Received: February 3, 2023 Address: 146 Fairchild Street Material Type: Synthetic Turf Suite 150 Material Condition: Excellent, New Daniel Island, SC 29492 Material ID: 42 oz DFE 2.0”

Construction Analysis

Method Test Description Test Result

ASTM D5848

Total Product Weight 75.9 oz/yd² Pile Yarn Weight 42.4 oz/yd² Primary Backing Weight 9.20 oz/yd² Secondary Backing Weight 24.3 oz/yd²

ASTM D5823 Average Tuft Height 2.00” ASTM D5793 Stitch Count 2.66 spi ASTM D5793 Gauge 3/8” ASTM D1335 Average Tuft Bind 15.6 lbs/force ASTM D5034 Average Grab Tear Strength: Length Direction 291 lbs/force ASTM D5034 Average Grab Tear Strength: Width Direction 290 lbs/force

Performance Analysis

Method Test Description Test Result ASTM F1551 Water Permeability (1) 65.3 inches/hr ASTM D2859-16 Pill Flammability (1) 8 out of 8 Pass Meets 16CFR 1630 (FF1-70) ASTM F1015 Abrasiveness Index (1) 30

¹ Infill System: 30% Sand, 70% Rubber to depth of 35mm

We undertake all assignments for our clients on a best effort basis. Our findings and judgments are based on the information to us using the latest test methods available.

TSI can only ensure the test results for the specific items tested.

Unless otherwise noted in the deviations sections of this report, all tests are performed in compliance with stated test method.

Test Report Approval:

Erle Miles, III, Lab Director Testing Services (TSI) LLC TSi Accreditation: Our laboratory is accredited by the US Dept. of Commerce, National Institute of Standards and Technology: ISO/IEC 17025:2005. Our code # is: NVLAP 100108-0.

TSi is an Organizational Member of ASTM (American Society for Testing and Materials). TSi is a certified independent testing laboratory by the STC (Synthetic Turf Council).

100108-0

LABORATORY TEST REPORT

TEST SUMMARY

90930 3354-3210

February 16, 2023