Addendum 1.pdf
PDF 559 KB Posted
- Attached to
- RFB-45-27 Russellville Armory Renovations DMA
- Solicitation number
- RFB 785 2700000047 3
- Issued by
- Laurel County, Kentucky
About this file
This is Addendum No. 1 to Invitation to Bid No. RFB-45-27 issued by the Commonwealth of Kentucky Department for Facilities and Support Services, Division of Engineering and Contract Administration, for the Russellville Armory Renovations project on behalf of the Department of Military Affairs. The addendum, dated August 4, 2026, provides amendments to the original specifications and drawings dated June 24, 2026, for the facility located at 600 Armory Drive, Russellville, Kentucky 42276. The project involves comprehensive renovations to the armory's interior spaces, including multiple classrooms, offices, restrooms, storage areas, mechanical spaces, food preparation areas, an assembly hall, locker rooms, and wellness facilities. The addendum consists of two items addressing contractor questions regarding building controls systems and revisions to architectural drawings, specifically replacing Drawings ID1.1 (Finish Plan) and ID1.2 (Finish Legend and Room Finish Schedule) with revised versions dated August 4, 2026 to correct finish plan notations and room finish schedule details. Bidders must acknowledge receipt of this addendum on their final bid documents.
The addendum clarifies that the controls specification requirement specifies Automated Logic controls systems with an allowance covering the full scope of specification section 230900, and that alternative control systems such as open Tridium solutions will not be accepted for this project. The revised drawings detail comprehensive interior finish specifications for 31 rooms and spaces, including specific finishes for flooring (resinous epoxy systems, ceramic tile, resilient flooring, and carpet tile), wall bases, wall finishes (painted drywall, ceramic tile, and sealed concrete), ceiling finishes (acoustical panels and painted surfaces), and interior paint colors and specifications. The finish specifications reference detailed material legends identifying manufacturers, styles, colors, and product specifications for all interior components, along with transition details and installation requirements at material junctures.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Final_RFB_785_2700000047_1_SO_FORM.PDF | ||
| Addendum 2.pdf | ||
| Final_RFB_785_2700000047_3_SO_FORM.PDF | ||
| Final_RFB_785_2700000047_2_SO_FORM.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
COMMONWEALTH OF KENTUCKY
DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES
DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION
INVITATION TO BID NO: RFB-45-27
FOR: Russellville Armory Renovations Department of Military Affairs Russellville, Kentucky
DATE: August 4, 2026
RFB-785-2700000047
ADDENDUM NO. One (1)
BIDDER SHALL CONFORM TO THE FOLLOWING CHANGES AS SAME SHALL BECOME BINDING
UPON THE CONTRACT TO BE ISSUED IN RESPONSE TO THIS INVITATION TO BID.
Item 1: Refer to attached addendum for all additions, deletions, and/or changes to specifications and/or drawings.
END OF ADDENDUM
Invitation to Bid No. RFB-45-27 For: Russellville Armory Renovations Department of Military Affairs Russellville, Kentucky
Janis Wilhoite, Statewide Procurement Analyst II Division of Engineering and Contract Administration
P a g e | 1 of 1
T000-LASTNAME-
INT
INDIANA | ILLINOIS | KENTUCKY | OHIO
haferdesign.com
ADDENDUM
Project: RFB-45-27 DMA Russellville Renovations Addendum No.: 001
600 Armory Drive
Russellville, KY 42276 Date: August 4, 2026
Owner: Commonwealth of Kentucky Project Number: 2512-339
403 Wapping Street
Fankfor, KY 40601 Contract for: ALL
The original specifications and drawings dated June 24, 2026 for the project noted above are amended as noted in this Addendum Number 001. Receipt of this addendum and any subsequent addenda must be acknowledged on the final bid documents. This addendum consists of two item(s) and attachment(s).
Attachments: Drawing ID1.1 revised 8/4/26 Drawing ID1.2 revised 8/4826
By: Russell Fredrick
CC: Distributed through Ecomm.
CONTRACTOR QUESTIONS:
1-1 QUESTION: Would the DMA customer allow ATS to provide and Open Tridium solution like other Military locations? ANSWER: No. The controls specification is for information only. There is a controls allowance for Automated Logic to be provided for this project. The allowance covers the full scope of the 230900 sections.
DRAWINGS
1-2 Replace Drawings ID1.1 FINISH PLAN and ID1.2 FINISH LEGEND AND ROOM FINISH SCHEDULE with Drawings ID1.1 and ID1.2 revised 8/4/26 for corrections to Finish Plan notations and Room Finish Schedule.
ASSEMBLY
HALL
STORAGE
FOOD
STORAGE
118 SCULLERY
FOOD PREP
MECHANICAL
EQUIPMENT
UNIT
STORAGE
ARMS VAULT
OFFICE
OFFICE
OFFICE
MECHANICAL
EQUIPMENT
WELLNESS
MEN'S
RESTROOM
SHOWER
VESTIBULE
LOCKER
ROOM
RECRUITER
WOMEN'S
RESTROOM
SHOWER
STORAGE
DATA
CLASSROOM
CLASSROOM
CORRIDOR
MAINTENANCE
STORAGE
RF01
RF01
CPT01
CPT01
CPT01 RF01
RF01
RF01
CPT01
SC01
RF01
RF02
RFO2
CPT01 CPT01
RF01
PC01
SC01
SC01
RF02
RF02
1 1
RF02
COMMONWEALTH
T
No.
A
OF
UTNE
K
IHRC
R
TSIGE
C
KC
E
Y
T
RE
D
ES
R U
S D
RFM.L
E
R
EL
C K
I
DRAWING INFORMATION
CHECKED BY
REVISION HISTORY OF THIS DRAWING
DRAWING NO.
AS BUILT DATE
MM/DD/YR
COMMONWEALTH OF KENTUCKY
FINANCE AND ADMINISTRATION CABINET
DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES
DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION
FRANKFORT, KENTUCKY
DESCRIPTION OF REVISIONS DATE
RTA DATE
AS BUILT DATE
06/24/26
MM/DD/YR
DRAWN BY
A&E FILE NO. 2512-339
DECA LOG #
ACCOUNT NO.
095-CC79-RU04-00
DESCRIPTION OF REVISIONS DATE
DESIGNED BY
06/24/26
DMA RUSSELVILLE RENOVATIONS
FINISH PLAN
1D1.1 Author
Checker
Designer
1/8" = 1'-0"
FIRST FLOOR PLAN
FINISH PLAN REFERENCE NOTES
1 ROLLER WINDOW SHADE, RWS01.
GENERAL INTERIOR FINISH NOTES
A. ALL INTERIORS NOTES, SCHEDULES AND LEGENDS
REFERENCE ABCD LEGEND. REFER TO VIEW HEADER OF
ROOM FINISH SCHEDULE.
B. PROVIDE RESILIENT OR METAL TRANSITION STRIP AT ALL
FLOORING MATERIAL JUNCTURES. WHERE MATERIALS
TRANSITION AT DOORS CENTER OF TRANSITION TO BE
LOCATED ON CENTER OF DOOR. REFER TO DETAILS FOR
TYPICAL FLOOR MATERIAL TRANSITIONS. COLOR SELECTED
BY ARCHITECT FROM MANUFACTURES FULL RANGE OF
COLORS.
C. ALL EXPOSED GYP. CEILINGS AS WELL AS UNDERSIDE AND
FACES OF BULKHEADS, AND SOFFITS TO BE PAINTED, REFER
TO FINISH SCHEDULE FOR CEILING FINISHES AND REFLECTED
CEILING PLANS FOR CEILING MATERIAL EXTENTS AND FINISH
REQUIREMENTS. COORDINATE ANY PAINT FINISHES WITH
ARCHITECT IN FIELD BEFORE PROCEEDING WITH FINISH
WORK.
D. REFER TO DOOR SCHEDULE FOR CLARIFICATION OF DOOR
MATERIALS. ALL HOLLOW METAL DOORS AND HOLLOW METAL
FRAMES TO BE PAINTED BOTH SIDES, [PT00]; [COLOR
SELECTED BY ARCHITECT FROM MANUFACTURES FULL RANGE
OF COLORS].
E. ALL EXPOSED GYP WALLS TO BE PAINTED UNLESS NOTED
OTHERWISE.
F. ALL DIFFUSERS TO BE PAINTED TO MATCH ADJACENT WALL
FINISH, VERIFY COLOR WITH ARCHITECT IN FIELD.
G. PAINT FINISH SHEEN SCHEDULE: WALLS - EGGSHELL ACRYLIC
LATEX; HOLLOW METAL DOORS AND FRAMES - SEMI GLOSS
ALKYD URETHANE ENAMEL; CEILING - FLAT ACRYLIC LATEX;
RESTROOM - EGGSHELL EPOXY; UNLESS NOTED OTHERWISE.
H. WINDOW SILLS TO BE SOLID SURFACE, COLOR TO BE
SELECTED BY ARCHITECT FROM CORIANS FULL RANGE OF
COLORS.
I. REFER TO FINISH FLOOR PLANS FOR PAINT ACCENT
LOCATIONS AND FLOOR FINISH PATTERNS AND EXTENTS.
J. REFER TO INTERIOR ELEVATIONS FOR CASEWORK FINISH
LOCATION.
K. WHERE NEW FINISHES WOULD MATCH EXISTING FINISHES, OR
NEW FINISHES ARE NOT REQUIRED, MAINTAIN EXISTING
FINISHES WHERE POSSIBLE DURING DEMOLITION AND
CONSTRUCTION PHASE FOR REUSE. PATCH AND MATCH
EXISTING FINISHES WHERE DISTURBED BY CONSTRUCTION.
L. PROVIDE ALL WALL PROTECTION ( I.E. CORNER GUARDS,
HANDRAILS, BUMPER GUARDS) WHERE INDICATED ON FLOOR
PLANS.
M. CONFIRM ACCENT PAINT LOCATION AND COLOR WITH
ARCHITECT IN FIELD BEFORE PROCEEDING WITH FINISH
WORK.
1 ADDENDUM - 01 8/4/26
EXISTING SUBFLOOR
RESINOUS FLOORING SYSTEM
RESINOUS 6" HIGH WALL BASE
CMU WALL
SCHLUTER TRANSITION
(AE)
EXISTING CONCRETE
SUBSTRATE
SAWCUT TERMINATION
1/2" (12.7mm) DEEP
1/2" (12.7mm) DEEP
SAWCUT
HIGH PERFORMANCE
RESINOUS FLOORING
SYSTEM
CHIP CONCRETE BACK A MIN
OF 3" (76.2mm) FOR TRANSITION
WITH A 1/2" (12.7mm) DEPTH
MIN. 3"
EXISTING VCT
TILE
TILE
SUBSTRATE
SCHLUTER RONDEC, (AE) UNLESS
OTHERWISE NOTED
TYPICAL CORNER (U.O.N.)
TILE
SCHEDULED WALL FINISH
SCHLUTER
SCHIENE EDGE
TILE TO PAINTED GYP/
WALLCOVERING
TILE
DOOR FRAME
SCHLUTER SCHIENE
EDGE, (AE) UNLESS
OTHERWISE NOTED
TILE EDGE AT DOORFRAMES
TILE
SCHEDULED COVE BASE FINISH
SCHLUTER SCHIENE
EDGE, (AE) UNLESS
OTHERWISE NOTED
TILE TO COVE BASE
C O
VE
B
AS
E
SCHEDULED FLOOR
COMMONWEALTH
T
No.
A
OF
UTNE
K
IHRC
R
TSIGE
C
KC
E
Y
T
RE
D
ES
R U
S D
RFM.L
E
R
EL
C K
I
DRAWING INFORMATION
CHECKED BY
REVISION HISTORY OF THIS DRAWING
DRAWING NO.
AS BUILT DATE
MM/DD/YR
COMMONWEALTH OF KENTUCKY
FINANCE AND ADMINISTRATION CABINET
DEPARTMENT FOR FACILITIES AND SUPPORT SERVICES
DIVISION OF ENGINEERING AND CONTRACT ADMINISTRATION
FRANKFORT, KENTUCKY
DESCRIPTION OF REVISIONS DATE
RTA DATE
AS BUILT DATE
06/24/26
MM/DD/YR
DRAWN BY
A&E FILE NO. 2512-339
DECA LOG #
ACCOUNT NO.
095-CC79-RU04-00
DESCRIPTION OF REVISIONS DATE
DESIGNED BY
06/24/26
DMA RUSSELVILLE RENOVATIONS
FINISH LEGEND AND ROOM FINISH SCHEDULE
1D1.2 Author
Checker
Designer
ROOM FINISH SCHEDULE
Room Floor Finish Base Finish
Wall Finish Ceiling Finish Comments NumberNumber Name Wall A Wall B Wall C Wall D
101 VESTIBULE RF01 RB01 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 APC01 PT01 ABOVE 4' AFF, PT02 UP TO 4' AFF. RF01 BASE, TAKE UP 4" 101 102 CORRIDOR RF01 RB01 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 APC01 PT01 ABOVE 4' AFF, PT02 UP TO 4' AFF. RF01 BASE, TAKE UP 4" 102 103 CLASSROOM CPT01 RB01 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 APC01 PT01 ABOVE 4' AFF, PT02 UP TO 4' AFF. RF01 BASE, TAKE UP 4" 103 104 CLASSROOM CPT01 RB01 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 APC01 PT01 ABOVE 4' AFF, PT02 UP TO 4' AFF. RF01 BASE, TAKE UP 4" 104
105 STORAGE CPT01 RB01 PT01 PT01 PT01 PT01 APC01 105
108 WOMEN'S RESTROOM RF02 RF02 CT03 CT03 CT03 CT03, CT04 APC02 PROVIDE SCHLUTER TRANSITION STRIP AT TOP OF FLASH COVE BASE. RF02 BASE, TAKE UP 8" H
109 RECRUITER CPT01 RB01 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 APC01 109
110 OFFICE CPT01 RB01 PT01, PT02 PT01,PT02 PT02 PT01, PT02 APC01 PT01 ABOVE 4' AFF, PT02 UP TO 4' AFF. WALL C PT02. 110
111 OFFICE CPT01 RB01 PT03 PT03 PT03 PT03 APC01 111
112 OFFICE CPT01 RB01 PT03 PT03 PT03 PT03 APC01 112
114 MEN'S RESTROOM RF02 RF02 CT03 CT03 CT03, CT04 CT03 APC02 PROVIDE SCHLUTER TRANSITION STRIP AT TOP OF FLASH COVE BASE. RF02 BASE, TAKE UP 8" H
116 SHOWER RF02 RF02 CT03 CT03 CT03 CT03 PT01 PROVIDE SCHLUTER TRANSITION STRIP AT TOP OF FLASH COVE BASE. RF02 BASE, TAKE UP 8" H
117 STORAGE N/A N/A PT01 PT01 PT01 PT01 117
118 FOOD STORAGE RF02 RF02 PT01 PT01 PT01 PT01 RF02 BASE, TAKE UP 8" H 118
119 SCULLERY RF02 RF02 PT01 PT01 PT01 PT01 PT01 RF02 BASE, TAKE UP 8" H 119
120 FOOD PREP RF02 RF02 PT01 PT01 PT01 PT01 PT01 RF02 BASE, TAKE UP 8" H 120
121 MECHANICAL EQUIPMENT N/A N/A PT01 PT01 PT01 PT01 121
122 UNIT STORAGE SC01 N/A PT01 PT01 PT01 PT01 PT01 - DRYFALL 122
123 ARMS VAULT SC01 N/A PT01 PT01 PT01 PT01 PT01 123
124 ASSEMBLY HALL PCO1 PAINT PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 PT01 - DRYFALL 124
125 MECHANICAL EQUIPMENT N/A N/A PT01 PT01 PT01 PT01 PT01 - DRYFALL 125
126 LOCKER ROOM RF01 RB02 PT01, PT02 PT01,PT02 PT01,PT02 PT01, PT02 PT01 - DRYFALL 126
127 STORAGE RF01 RB02 PT01 PT01 PT01 PT01 127
128 WELLNESS RF01 RF01 PT02 PT02 PT02 PT02 APC01 RF01 BASE, TAKE UP 8" H 128
129 SHOWER RF02 RF02 CT03 CT03 CT03 CT03 PT01 PROVIDE SCHLUTER TRANSITION STRIP AT TOP OF FLASH COVE BASE. RF02 BASE, TAKE UP 8" H
130 DATA PC01 N/A PT01 PT01 PT01 PT01 130
131 MAINTENANCE N/A N/A PT01 PT01 PT01 PT01 131
MATERIAL FINISH LEGEND
064116
PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS
PL01 MFG: FORMICA
COLOR: BEIGE ELM
NMBR: 5794-NG
PLASTIC LAMINATE
093013
CERAMIC TILING
CT01 MFG: DALTILE
STYLE: CALGARY
FINISH: MATTE
COLOR: FOG
SIZE: 12X24
GROUT:TEC EPOXY GROUT
GROUT COLOR: 927 LIGHT PEWTER
JOINT WIDTH: MANUF. MIN
PORCELAIN/CERAMIC TILE (WALL
TILE)
CT02 MFG: DALTILE
STYLE: ACREAGE
FINISH: MATTE
COLOR: STETSON, STACKED
SIZE: 1X24
GROUT: TEC EPOXY GROUT
GROUT COLOR: 939 MIST
JOINT WIDTH: MANUF. MIN
PORCELAIN/CERAMIC TILE
(ACCENT TILE)
CT03 MFG: AMERICAN OLEAN
STYLE: COLOR STORY WALL
COLOR: MATTE DESIGNER WHITE
SIZE: 4X16
GROUT: TEC POWER GROUT
GROUT COLOR: 939 MIST
JOINT WIDTH: MANUF MIN
PORCELAIN/CERAMIC TILE (WALL
SUBWAY TILE)
095113
ACOUSTICAL PANEL CEILINGS
APC01 MFG: ARMSTRONG
STYLE: ULTIMA
ITEM NMBR: 1941
EDGE STYLE: BEVELED TEGULAR
SIZE: 24X24
FINISH: SMOOTH
GRID: PRELUDE XL 15/16"
TILE AND GRID COLOR: WHITE
ACOUSTICAL PANEL CEILING
APC02 MFG: ARMSTRONG
STYLE: CERMAGUARD
ITEM NMBR: 607
EDGE STYLE: SQUARE LAY IN
SIZE: 24X24
FINISH: SMOOTH
GRID: PRELUDE XL 15/16"
TILE AND GRID COLOR: WHITE
ACOUSTICAL PANEL CEILING
(RESTROOMS)
096513
RESILIENT BASE AND ACCESSORIES
RB01 MFG: TARKETT JOHNSONITE
STYLE: MILLWORK
PROFILE: EXHIBIT
HEIGHT: 4.25"
COLOR: BLACK
RUBBER WALL BASE
RB02 MFG: TARKETT JOHNSONITE
STYLE: MILLWORK
PROFILE: EXHIBIT
HEIGHT: 8"
COLOR: BLACK
RUBBER WALL BASE
096723
RESINOUS FLOORING
RF01 MFG: SHERWIN WILLIAMS
STYLE: 1/4" DECO FLAKE
COLOR MIX: RIVER ROCK
NOTE: COORDINATE FINAL SLIP RESISTANCE
FINISH WITH ARCHITECT AND OWNER.
FLAKE EPOXY
RF02 MFG: SHERWIN WILLIAMS
STYLE: DECO QUARTZ
COLOR MIX: STORMY EVENING
NOTE: COORDINATE FINAL SLIP RESISTANCE
FINISH WITH ARCHITECT AND OWNER
QUARTZ EPOXY
096813
TILE CARPETING
CPT01 MFG: INTERFACE
COLCT: ROCK SPRINGS
NMBR: 13116
COLOR: 107290 TAUPE GNEISS
099123
INTERIOR PAINTING
PT01 MFG: SHERWIN WILLIAMS
COLOR: PURE WHITE
NMBR: SW 7005
INTERIOR PAINT (WHITE)
PT02 MFG: SHERWIN WILLIAMS
COLOR: AT EASE SOLDIER
NMBR: SW 9127
INTERIOR PAINT (GREEN ACCENT)
PT03 MFG: SHERWIN WILLIAMS
COLOR: JOGGING PATH
NMBR: SW 7638
INTERIOR PAINT (NEUTRAL)
PT04 MFG: SHERWIN WILLIAMS
COLOR: CITYSCAPE
NMBR: SW 7067
INTERIOR PAINT (DOOR FRAMES)
099123.
SEALED CONCRETE (INTERIOR PAINTING)
SC01 SEE SPECIFICATIONS SEALED CONCRETE
102113.17
PHENOLIC-CORE TOILET COMPARTMENTS
HCM01 CUSTOM COLOR
FORMICA
BEIGE ELM
PHENOLIC-CORE TOILET
COMPARTMENTS
122413
ROLLER WINDOW SHADES
RWS01 MFG: DRAPER
SERIES: CLUTCH-OPERATED NEXD
FABRIC STYLE: SHEERWEAVE 3% OPEN
FABRIC COLOR: P14 OYSTER/PEARL GRAY
FASCIA SHAPE: SQAURE
FASCIA COLOR:ANODIZED ALUMINUM
ROLLER WINDOW SHADES
123661.16
SOLID SURFACING COUNTERTOPS
SS01 MFG: DURASEIN
COLOR: DM5042 LIGHT HAZE
SOLID SURFACE
1 1/2" = 1'-0"
RESINOUS FLOORING COVE ON CMU
1 1/2" = 1'-0"
RESINOUS FLOORING TO CONCRETE
6" = 1'-0"
TILE CORNER GUARD DETAIL
12" = 1'-0"
WALL TILE TRANSITIONS
12" = 1'-0"
TILE TRANSITION AT DOOR FRAME
12" = 1'-0"
TILE AT COVE BASE
1 ADDENDUM - 01 8/4/26
| 2512-339 DMA RUSSELLVILLE RENOVATIONS - ADD-001.pdf |
| ID1.1 R1.pdf |
| Sheets |
| 1D1.1 - FINISH PLAN |
| ID1.2 R1.pdf |
| Sheets |
| 1D1.2 - FINISH LEGEND AND ROOM FINISH SCHEDULE |
File details come from the government source that posted it. Updated .