AB-133F-14-RQ-0019_AMENDMENT_A0001.pdf

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

BOTTOM TRAWL SURVEY OF GROUNDFISH AND CRAB OF THE EASTERN BERING SEA CONTINENTAL SHELF

Amendment #A0001 to Solicitation AB-133F-14-RQ-0019 is issued:

...See Continuation Page

1 12

A0001 JAN 14, 2014 NFFS7100-14-00207

FS710031

RES ASSESS AND CONSERV ENGINE

NOAA/NMFS 7600 SAND PT WAY NE

/F/AKC1

SEATTLE WA 98115-6349

AJ630031

WESTERN ACQUISITION DIVISION

CONTRACTS BRANCH

7600 SAND POINT WAY NE, WC3

SEATTLE WA 98115-6349

AB-133F-14-RQ-0019

JAN 09, 2014

See Schedule

Continuation Page

PAGE 2 OF 12 AB-133F-14-RQ-0019/A0001

Continued from Block 14...

1) To correct the email address listed for the Contract Specialist in Part V, Paragraph 2 of the solicitation.

Reference Evaluation Factor 3, Past Performance, the note to offerors should be revised to state that:

Upon completion of the form, the customer shall return it to the DOC, NOAA, Western Acquisition Division by email to: crystina.r.elkins@noaa.gov or fax: 206-527-3916.

2) To delete Solicitation Attachments 5, 7 and 8 in their entirety and replace with the attached revised Attachments 5, 7 and 8.

The receipt date for proposals remains unchanged at Wednesday, January 29, 2014 at 2:00 pm local Seattle time.

All other terms and conditions remain unchanged.

Attachment Page

PAGE 3 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

AB-133F-14-RQ-0019

83 112 Two seam Bottom Trawl Description, Rigging and Net Plan

Netting:

Body and wing 4" stretched measure (including length of one knot) 60 T nylon, three strand twist, preshrunk and dyed green.

Intermediate and codend 3½" stretched measure 96 T nylon, three strand, twist, preshrunk and dyed green.

Codend liner 1¼" stretched measure 18 T nylon, three strand twist, preshrunk and dyed green.

Headrope:

83' 9" of ½" (6×19) galvanized fiber core wire rope wrapped with " polypropylene rope.

Both eyes have ½" gusseted thimbles.

The headrope doesn’t include the length of either eye.

Length is measured from the top of the nicro sleeve to the top of nicro at the other end.

Top wings are hung over 36'.

Footrope:

111' 9" plus thimbled eyes of ", (6×19) galvanized, ber core wire rope, wrapped with ½" polypropylene rope.

Loops of 5/16" galvanized, proof coil chain, (approx. 170') are tied to wrapped footrope by passing two fathoms of double 21 T nylon twine through every tenth link starting at the top of the nicro forming the eye splice.

Chain links are secured to footrope every 8" throughout length of wing forming 76 chain hangings over 50' each wing.

Busom has 16 chain hangings equally spaced over 11' 9".

There are four bars (2 meshes) per hanging in wings and 4 meshes per hanging in busom, hung with 96 T nylon round braid hanging twine.

After the net is hung, split pieces of heavy rubber hose are served around footrope, passing the hose twice between each chain hanging for the length of the footrope.

Breastlines:

½" (6×19) galvanized wire rope wrapped with " polypropylene rope.

PAGE 4 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

AB-133F-14-RQ-0019

Top and bottom breastlines are 8', measured from the top of the nicro press forming one eye through the bearing point of the other eye.

Riblines:

¾" Samson 2 and 1® Duralon braided trawl rope.

Riblines are hung at 97% of stretched measure of the gored seam.

All measurements are made with 400 lbs of tension on rope.

Gored seams are attached to riblines using white, untreated 60 T braided nylon hanging twine used to tie a benzel every 16".

Flotation:

Seventeen 8" aluminum side lug floats along each wing and seven 8" floats in center.

Total of 41 floats along headrope spaced 24¼" apart.

Buoyancy of 6.3 lbs each (258 lbs total).

Side seams:

Side seams are laced in top and bottom individually gathering 3 meshes

(4 knots) using white, double 21 T perma grip® (or like kind) nylon three strand twine.

Top and bottom panels are then laced together using green, double 21 T perma grip® (or like kind) nylon three strand twine.

Codend:

3½" stretched measure (including one knot) nylon, dyed green, 96 T nylon three strand mesh.

Codend is a “double wall” construction.

Four panels of 96 T web cut 64 meshes long by 120 meshes deep.

Two meshes on each side are laced together, leaving 60 “open meshes” per panel.

Gored seams are laced together using 60 T round braid hanging twine and hung to riblines of ¾" Samson 2in1®

PAGE 5 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

AB-133F-14-RQ-0019

Duralon braided trawl rope.

Riblines in codend are hung at 90% of stretched measurement of gored seams.

Riblines are measured under 400 lbs of tension.

Codend is closed at aft end using 24 2½" x 5/16" galvanized steel rings.

A ¼" Duralon braided rope is passed through 5 selvage meshes and a ring is attached to the rope using a cow hitch every 12" leaving five open meshes between each ring.

The bag is then closed using a " ¾" hauling clip.

A liner of 1¼" three strand twine nylon, 360 meshes long by 200 meshes deep is hung on the inside of the bag 78 meshes up from terminal end.

Materials List for 83 112 Bottom Trawl

WEB:

Mesh sizes listed are given in “stretched measure”, a standard method of measuring mesh size that includes the length of one knot.

Body and wings ~ 4" # 60T three strand nylon dyed green.

Intermediate ~ 3½" # 96T three strand nylon, dyed green, single wall construction.

Codend ~ 3½" # 96T three strand nylon, dyed green, double wall construction.

Liner ~ 1¼" # 18T three strand nylon dyed green.

Chaffing gear ~ 6", 6 mm polyethylene knotted web.

WIRE ROPE:

6 ×19 galvanized fiber core, eyes are formed using galvanized reinforced thimbles.

CHAIN:

5/16" galvanized proof coil.

FLOATS:

8" side lug trawl floats, depth rated to a minimum 400 fm, 258 lbs of total buoyancy.

RIBLINES:

¾" stable braid, white, light bonding.

PAGE 6 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

AB-133F-14-RQ-0019

WINE:

Sewing panels together: # 60T three strand nylon.

Lacing seams: double, white # 21T three strand nylon.

Joining seams together: double, green # 21T three strand nylon.

Hanging on framing lines: white, # 96T round braid hanging twine.

Fly mesh at end of bag # 182T round braid hanging twine

ROPE:

Float lines ¼" polypropylene.

Pucker ring lines ¼" Samson Duralon™ 2 in 1® braid.

Restrictor rope 1 1/8" Poly Plus™ three strand.

Splitting strap ¾" Spectra® braided rope with eye in each end.

Splitting ring lines ½" Samson Duralon™ 2 in 1® stable braid.

Hole through trawl float line ½" hollow braid Poly Plus™.

FOOTROPE:

" 6 x 19 galvanized, ber core wire rope with reinforced thimbled eyes.

½" three strand polypropylene rope served around wire rope.

5/16" galvanized proof coil chain.

Split heavy rubber hose served between chain hangings.

Footrope setback/extension, ½" long link alloy chain connected to footrope with a " hammer lock. Total length including connecting hardware 24".

Splitting rings 5½" x 3/4".

Pucker rings at end of codend 2½" x ¼".

PAGE 7 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

AB-133F-14-RQ-0019

PAGE 8 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

PAGE 9 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

PAGE 10 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #5

PAGE 11 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #7

AB-133F-14-RQ-0019

Equipment list (for one vessel) for the eastern Bering Sea bottom trawl surveys.

Item Number Size of Each Unit Weight per Unit (lb) Total Weight(lb)

Fiberglass shed 1 6’L x 4’w x 7’H 1200 1,200

Sorting Tables 1 10’L x 5’W x 4’H 800 800

Large Specimen Table 1 8’L x 4’W x 4’H 600 600

Small Specimen Table 2 4’L x 4’W x 4’H 200 400

Holding Tanks 2 4’L x 4’W x 4’H 275 550

Trawl Doors 3 9’L x 6’W x 2’H 1,800 7,200

Trawl Nets 7 6’L x 6’W x 4’H 3,000 21,000

Cable 2 pallets 4’L x 4’W x 3’H 800 1,600

Spare Web & Hardware 1 pallet 4’L x 4’W x 3’H 600 600

TOTAL 33,950

PAGE 12 OF 12 AB-133F-14-RQ-0019/A0001

ATTACHMENT #8

AB-133F-14-RQ-0019

Map of Bottom Trawl Survey Sampling Stations in eastern Bering Sea