A5 SOW Control Surface 6689565.docx

STATEMENT OF WORK

Control Surface Sub-Assembly For the MK 30 Mod 1 Target Program

1 Scope

This proposed contract is for procurement of Control Surface Sub-Assembly, NAVSEA Drawing 6689565 Rev A, Baseline with Drawing Reference, Sequential, and all associated drawings, changes, and specifications. The award shall be for a base year with one option year.

1.1 Background

The MK 30 Mod 1 Anti-Submarine Warfare (ASW) target is a heavyweight torpedo-sized underwater vehicle used to provide surface ships, submarines, and aircraft with realistic, reliable, available and economical ASW training.

The MK 30 Mod 1 target contains equipment that responds to active sonar and torpedo interrogation and provides radiated noise for passive sonar tracking and acoustic homing torpedoes. A submarine-like magnetic anomaly signature is also provided for use by ASW aircraft equipped with magnetic anomaly detection equipment. Though originally designed for use in the open ocean, recent design changes allow for littoral ASW training.

2 Applicable Documents

The following documents are applicable to this SOW to the extent specified herein. In case of conflict between the Contract Schedule, and this SOW, the order of precedence shall be in accordance with Federal Acquisition Regulation (FAR) 52.215-8.

2.1 Department of Defense specifications

2.2 Department of Defense standards

MIL-STD-130 – Identification Marking of U.S. Military Property MIL-STD-3100B - Technical Data Packages

2.3 Other Government Documents

N/A

2.4 Industry documents

ANSI Y14.5-2018 – Dimensioning and Tolerance A-A-208D – Ink, Marking, Stencil, Opaque AA3165-17825 – Lacquer, Clear DOD-STD-2101 - Classification Characteristics ASME-Y14.38 - Abbreviations and Acronyms for Use on Drawings and Related Documents ASME-Y14.100 - Engineering Drawing Practices ISO9001 - Quality Management System Requirements

3 Requirements

(a) CLIN 0001 – Control Surface Sub-Assembly First Article (Qty. 2)

(1) The contractor shall build Control Surface Sub-Assembly in accordance with NAVSEA Drawing 6689565 Rev A, Baseline with Drawing Reference - Sequential, and all associated drawings, changes, and specifications. Inspection and Acceptance to be performed at NUWC Keyport by Codes 42 and 52. The government will need 60 days for IC – Dimensional/Quality inspection and IU – End user inspection and acceptance.

(b) CLIN 0002 - Control Surface Sub-Assembly (Qty. 22)

(1) The contractor shall build Control Surface Sub-Assembly in accordance with NAVSEA Drawing 6689565 Rev A, Baseline with Drawing Reference - Sequential, and all associated drawings, changes, and specifications. Inspection and Acceptance to be performed at NUWC Keyport by Codes 42 and 52. The government will need 60 days for IC – Dimensional/Quality inspection and IU – End user inspection and acceptance.

(c) CLIN 0003 - Control Surface Sub-Assembly - Option 1 (Qty. 10)

3.1 General

a. Early and/or partial deliveries are acceptable.

3.2 Detail tasks

N/A

3.2.1 System engineering

a. Technical studies

b. System effectiveness planning

N/A