A5 SOW Bracket Detector 5408765 PC.pdf

STATEMENT OF WORK

Bracket Detector For the MK30 Mod 1 Target Program

1 Scope

This proposed contract is for procurement of Bracket Detector, NAVSEA Drawing 5408765 Rev -, Baseline with Drawing Reference - Sequential, and all associated drawings, changes, and specifications. The award shall be for a base year with one option year.

1.1 Background

The MK30 Mod 1 Anti-Submarine Warfare (ASW) target is a heavyweight torpedo-sized underwater vehicle used to provide surface ships, submarines, and aircraft with realistic, reliable, available and economical ASW training.

The MK30 Mod 1 target contains equipment that responds to active sonar and torpedo interrogation and provides radiated noise for passive sonar tracking and acoustic homing torpedoes. A submarine-like magnetic anomaly signature is also provided for use by ASW aircraft equipped with magnetic anomaly detection equipment.

2 Applicable Documents

The following documents are applicable to this Statement of Work (SOW) to the extent specified herein. In case of conflict between the Contract Schedule, and this SOW, the order of precedence shall be in accordance with Federal Acquisition Regulation (FAR) 52.215-8.

2.1 Department of Defense specifications

N/A

2.2 Department of Defense standards

MIL-STD-31000 - Technical Data Packages DOD-STD-2101 - Classification of Characteristics MIL-STD-430– Preparation Installation Rivets Screws

2.3 Other Government Documents

N/A

2.4 Industry documents

MIL-I-43553 – Ink, Marking, Epoxy Base MIL-C-5541 – Chemical Conversion Coatings on Aluminum TT-P-1757 – Primer Coating Alkyd Base, One Component NAS 523 – Fastener Code TT-E-516 – Enamel, Lusterless, Quick-Drying Styrenated Alkyd Type MIL-P-6808 – Primer Coating Zinc Chromate, Process for Application of FED-STD-595 – Federal Standard: Colors used in Government Procurement

3 Requirements

(a) CLIN 0001 – Bracket Detector First Article (Qty. 2)

(1) The manufacturer shall build Bracket Detector first articles in accordance with NAVSEA Drawing 5408765 Rev-, Baseline with Drawing Reference – Sequential, and all associated drawings, changes, and specifications. Inspection and Acceptance to be performed at NUWC Keyport by Code 522. The government will need 45 days for IU – End user inspection and acceptance.

(b) CLIN 0002 – Bracket Detector Production (Qty. 8)

(1) The manufacturer shall build Bracket Detector production lot in accordance with NAVSEA Drawing

5408765 Rev-, Baseline with Drawing Reference – Sequential, and all associated drawings, changes, and specifications. Inspection and Acceptance to be performed at NUWC Keyport by Code 522. The government will need 45 days for IU – End user inspection and acceptance.

(c) CLIN 0003 – Bracket Detector Option 1 (Qty. 10)

3.1 General

Early and/or partial deliveries are acceptable.

3.2 Detail tasks

NA

3.2.1 System engineering

a. Technical studies

b. System effectiveness planning

NA