A5 PWS for Sargent Control Valve Training_Redacted.pdf

PERFORMANCE WORK STATEMENT

1. INTRODUCTION

This requirement is to procure Sargent Hydraulic Control Valve maintenance training for TRIDENT Refit Facility, Bangor (TRFB). Separate funding documents will be provided. The class will be held at the Sargent Aerospace facility, Tucson, AZ. Class hours will be in accordance with the requesting location’s operating hours (typically between 0700 – 1500 daily).

Period of Performance: 05/05/2025 – 09/25/2025

Number of Classes: 2 - Maximum class size is 5 students. Class 1: Monday 5/5/2025 – Thursday 5/8/2025 (5 seats) and Class 2: 9/22/2025 – 9/25/2025 (5 seats)

2. BACKGROUND

IAW standing NAVSEA and DOD guidance all maintenance Technicians and Mechanics will be trained to work on the equipment under their cognizance. TRFB has a standing requirement to conduct repairs and maintenance on

Sargent Hydraulic Control Valves as most hydraulic system on Submarines and Surface ships have these control valves. Sargent Aerospace manufactures these control valves and is the only vendor to provide advance maintenance and repair training for them.

3. SCOPE

Currently, the Government has a need for an unknown amount of personnel that may be required to obtain this training. There is a yearly need for at least 1 class due to new hires and reassignments of personnel.

Training should cover the areas as described below:

Basic Hydraulics Servo Control Valves

A. Basic Hydraulic Principles

B. Hydraulic Circuits and Symbols

C. Actuators

D. Relief and Pressure Reducing Valves

E. Directional Control Valves

F. Flow Control Valves

Servo Control Valves

A. Servo Control Principles

B. Trouble Shooting

C. Assemble and Disassemble

D. Setup and Testing

4. SUBMITTALS

Status Reports/Communications related to progress, status and completion over the course of the work will be provided to the Training Coordinator.

5. SPECIAL REQUIREMENTS OF CONTRACTOR

a. Provide a Certified Instructor, course books and other learning tools.

b. Provide a course which consists of both classroom instruction and hands-on training. .

c. Contractor shall provide Training Facility (including classroom and laboratory with tables and chairs for the class at their facility in Tucson, Az and ensure it is supplied all materials to conduct the class.

The instructor shall:

-Be flexible in his/her training approach and have the ability to accommodate different learning styles of students and actively engage discussions.

6. QUALITY ASSURANCE REQUIREMENTS:

For each class, the instructor will provide each student with course evaluation sheets. The completed student evaluations will be provided to the Training Coordinator. The instructor must maintain favorable student and staff evaluations.

7. GOVERNMENT POINTS OF CONTACT