A5 PERFORMANCE WORK STATEMENT (PWS) (5014-3520)_Redacted.pdf

PERFORMANCE WORK STATEMENT (PWS) for JML 5014-3520

KEYSIGHT (OEM) REPAIR AND CALIBRATION OF KEYSIGHT (7ZXR5)

MODEL E4448A PSA SPECTRUM ANALYZER 3 HZ - 50 GHZ for

Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52)

Part 1

General Information

1. GENERAL:

This is a non-personnel services contract to provide repair and calibration for Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52) Owned Equipment.

The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction:

The contractor Keysight (7ZRX5)) shall provide all personnel, equipment, supplies, facilities, tools, materials, supervision, and other items and non-personal services necessary, to perform a repair and calibration to bring the Government Furnished Equipment (GFE) equipment up to Original Equipment Manufacturer (OEM) specifications.

This is for Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF)(N4523A) Calibration Lab (Shop 52) Owned Equipment as listed in the GFE Attachment. If any unexpected PSNS & IMF equipment that are not listed in the GFE Attachment that are in need of repair and/or calibration, the Government shall contact and request a price quote for the additional equipment. If the Contractor’s price quote for the additional equipment is acceptable, the Government will modify the GFE Attachment to add the additional equipment pricing and provide such contract modification to Contractor. The Government will not send the additional equipment in for service until such equipment is listed in the GFE Attachment.

The contractor (Keysight) shall not sub-contract or farm-out the calibrations of PSNS & IMF Calibration Lab (Shop 52) Owned Equipment to third party entities unless approved by the Puget Sound Naval Shipyard SME listed in paragraph 3.1 or their designated representative. If necessary, the contractor (Keysight) can sub-contract the repair of submitted PSNS & IMF Equipment to third party entities. However, if and when repairs are done by the third party entity, the repair of the equipment is required to be returned its OEM specifications. Subsequently, the repair and calibration must be performed by a Keysight facility as listed in paragraph 3.4 or be approved by the Puget Sound Naval Shipyard SME listed in paragraph 3.1 or their designated representative.

When calibrations/repairs are completed, the contractor (Keysight) will provide return shipment of items with calibration certificates to Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF) (N4523A) Calibration Lab (Shop 52).

The contractor shall perform to the standards in this contract.

1.2 Background:

Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52) Owned Equipment will require repair and/or calibration.

1.3 Objectives:

Perform repair and calibration services for Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52) Owned Equipment at the Keysight facility.

1.4 Scope:

The service that the contractor (Keysight) shall accomplish/provide is to repair and calibration services for Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52) Owned Equipment.

If Keysight deems a piece of Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop

52) Owned Equipment unrepairable (or unable to calibrate) due to product life support issues or repair costs vs. replacement if item.

Keysight will contact the Technical Subject Matter Expert (SME) and inform them of the issue via email and then and they will determine the proper disposition of the equipment. When calibration service is performed, Keysight will provide details of the repair information and associated calibration certificate(s) on an item to Puget Sound Naval Shipyard & Intermediate Maintenance

Facility 1400 Farragut Avenue, Building 661, Tunnel 3, Code 136.3 Calibration Laboratory, Bremerton, WA 98314 Attn:

The Government can make copies and distribute the calibration certificate(s).

If Contractor upgrades the firmware on the equipment as part of the repair service, Contractor retains all intellectual property rights to the firmware upgrade including but limited to source codes, trade secrets rights, copyrights and patent rights

1.4.1 Type of Contract:

The government will award an individual service contract

1.5 Period of Performance:

The period of performance for Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop

52) Owned Equipment shall be 3-MAR-2025 TO 30-APR-2025

1.6. Quality Control:

The contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. The associated certificates will be returned with each piece of Puget Sound Naval Shipyard and Intermediate Maintenance Facility (N4523A) Calibration Lab (Shop 52) Owned Equipment after completed repair and/or calibration services. After acceptance of the quality control plan, the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system.

1.6.1 Quality Assurance:

The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.7 Location:

1.7.1 Place of Performance:

The work to be performed under this contract will be performed at the appropriate Keysight designated facility

1.7.2 Hours of Operation: The contractor is responsible for conducting business, between the hours of 0720 – 1602 Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.7.3 Recognized Holidays: [Contractor is not required to perform service on recognized holidays) New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Juneteenth Thanksgiving Day Independence Day Christmas Day

1.8 Security Requirements:

1.8.1 Physical Security Requirements: Material will be shipped to cog Keysight facility for repair and calibration. No on-site work, All references and deliverable items associated with this work are unclassified. The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use.

1.9 Special Qualifications: N/A

1.10 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The contracting officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the contracting officer will apprise the contractor of how the government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

1.11 Contracting Officer Representative (COR): The (COR) will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.12 Key Personnel: The follow personnel are considered key personnel by the government: Technical Subject Matter Expert (SME):

// Standards Manager Code 136.3 // . The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between 8 am to 3 pm, Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons

1.13 Contractor Travel: N/A

1.14 Other Direct Costs: N/A

1.15 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.16 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may effect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.17 Phase In /Phase Out Period: N/A

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

ISO/IEC 17025 is for use by laboratories in developing their management system for quality, administrative and technical operations.

Laboratory customers, regulatory authorities and accreditation bodies may also use it in confirming or recognizing the competence of laboratories

2.1.1. CONTRACTOR.

A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER.

A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR).

An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications.

This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE.

A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE.

Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL.

Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. PHYSICAL SECURITY.

Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE.

The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE Surveillance Plan (QASP).

An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL.

All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR.

One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12. WORK DAY.

The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK.

Monday through Friday, unless specified otherwise.

2.2. ACRONYMS: .

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative