A4_SOW_N6426721R6003 (draft).docx
DOCX document 31 KB Posted
- Attached to
- VLS Graphite Ablative Blocks Federal contract opportunity
- Solicitation number
- N6426721R6003
About this file
This statement of work and sources sought notice outline requirements for vertical launch system graphite ablative block kits. The Naval Surface Warfare Center seeks 100 kits from approved sources, with each kit containing eight blocks total. Kits must meet Weapon Specification WS20172A Type III. Responses are requested from potential responsible sources by December 30, 2020 to provide the kits in accordance with the statement of work and drawings. Initial delivery of 24 kits is required every three months for eight weeks after contract award, followed by 24 kits every two months until completion. The notice is to fulfill DFARS requirements and determine acquisition approach, including potential small business or socioeconomic set-asides.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Measurement Science and Engineering Department VLS Graphite Ablative Block Kits
1. INTRODUCTION
The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division (MS20) requires 100 Graphite Ablative Block Kits (drawing numbers 5224437-1 and 6655747-1) for the Vertical Launching System (VLS).
2. BACKGROUND
Naval Sea System Command (NAVSEA) Integrated Weapons System (IWS) Code 3L has a requirement to procure 100 Graphite Ablative Block Kits, each kit consisting of four (4) each of drawing numbers 5224437-1 and 6655747-1. These blocks will be installed in the VLS to protect other vital parts from the heat generated by a missile launch. These blocks are a critical and required part of the VLS.
3. SCOPE
This Statement of Work (SOW) defines the requirements for equipment that is part of VLS. In order to meet this requirement, NAVSEA IWS 3L requires the equipment listed below on Section 5 of this SOW.
4. APPLICABLE DOCUMENTS
Please refer to attached documents: designs 5224437-1 and Notice of Revisions (NORs), 6655747-1 and NORs, and Weapon Specification WS20172A Type III with NORs and Specification Change Notices.
| Document Number |
| Document Title |
| NAVSEA Drawings 5224437-1 |
| Ablative Block |
| NAVSEA Drawings 6655747-1 |
| Ablative Block |
| WS20172A Type III |
| Product Specification for Cast High Density Fiber Graphite Parts |
5. REQUIREMENTS
The Offeror shall provide a quantity of 100 Graphite Ablative Block Kits. Table 1 is the list of items contained in each Graphite Ablative Block Kit. The Offeror must conform to Weapon Specification WS20172A Type III with NORs and Specification Change Notices.
| KIT ITEM |
| DRAWING |
| DESCRIPTION |
| QTY |
| 1 |
| 5224437-1 |
| ABLATIVE BLOCK |
| 4 Blocks per Kit |
| 2 |
| 6655747-1 |
| ABLATIVE BLOCK |
| 4 Blocks per Kit |
| Kit Total |
| 8 Blocks per Kit |
Table I: List of items in one (1) Graphite Ablative Block Kit
6. GOVERNMENT FURNISHED PROPERTY
6.1 Government Furnished Material
N/A
6.2 Government Furnished Equipment
N/A
6.3 Government Furnished Information
N/A
7. DELIVERABLES
N/A
8. ACRONYM LIST
| ACRONYM |
| DENOTATION |
| NSWC |
| Naval Surface Warfare Center |
| NOR |
| Notice of Revision |
| VLS |
| Vertical Launch System |
| NAVSEA |
| Naval Sea System Command |
| IWS |
| Integrated Weapons System |
| SOW |
| Statement of Work |
ADDITIONAL INFORMATION
A. REQUIRED DELIVERY DATES
Initial delivery of 24 kits every 3 months, 8 weeks after contract award. Followed by the delivery of 24 kits every 2 months until complete.
B. PLACE OF PERFORMANCE
N/A
C. SHIPPING ADDRESS
LOGISTICS MANAGEMENT SPECIALIST
NUWC MINES LOGISTICS BRANCH BLDG 104-14 HWAD HAWTHORNE, NV 89415
D. INSPECTION AND ACCEPTANCE
TBD
E. TECHNICAL POINT OF CONTACT
4 | 4 image1.emf
File details come from the government source that posted it. Updated .