A26-009 ET Automatic Tap Tester - Item Description.pdf
PDF 124 KB Posted
- Attached to
- Automatic Tap Tester Federal contract opportunity
- Solicitation number
- FA8125-26-Q-0020
About this file
This memorandum for record from the Department of the Air Force's Headquarters Air Force Sustainment Center (AFMC) at Tinker Air Force Base details specifications for procuring ten (10) Automatic Tap Testers for the 76 AMXG unit. The requested Automatic Tap Tester must be a handheld, battery-powered device capable of detecting disbonding, damage, or delamination in honeycomb materials on panels up to 5mm thick, with specific requirements including LED and audio detection, a remote probe, XY defect mapping, calibration certificates, a durable protective case with foam cutouts, necessary accessories like acrylic feet and hammerhead, applicable software, and a manufacturer's warranty.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA812526Q0020.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A26-009 ET Automatic Tap Tester
1. 76 AMXG is requesting the utilization of funds for a quantity of ten (10) Automatic Tap Testers with the following specifications.
2. The requested descriptions/specifications are outlined below.
• Automatic Tap Tester shall be handheld.
• Automatic Tap Tester shall be battery powered.
• Automatic Tap Tester shall be capable of detecting disbonding/damage/delamination of honeycomb materials.
• Automatic Tap Tester shall include LEDs and a buzzer to offer both an audio and visual cue of disbonding/damage/delamination material detection.
• Automatic Tap Tester shall be able to detect disbonding/damage/delamination on panels up to 5mm thick.
• Automatic Tap Tester shall include a remote probe for hard-to-reach areas.
• Automatic Tap Tester shall include all necessary cables and calibration items (test block, angle indicator, etc.).
• Automatic Tap Tester shall include acrylic feet and hammerhead with replacements.
• Automatic Tap Tester shall include an XY plotter to map defects.
• Automatic Tap Tester shall include necessary software if applicable.
• Automatic Tap Tester shall come with a certificate of conformance and traceable calibration certificate.
• Automatic Tap Tester shall come with a durable case that can provide protection from harsh environments and rough handling. Case shall have foam cutouts to keep the tap tester and all other accessories secured in place.
• Automatic Tap Tester shall include a manufacturer’s warranty
File details come from the government source that posted it. Updated .