A25-013 Static Rig Tester - Item Description_Redacted.pdf
PDF 192 KB Posted
- Attached to
- A25-013 KC-135 Engine Static Rig Tester
- Solicitation number
- FA812525Q0080
About this file
This document is a Memorandum for Record from the Department of the Air Force Headquarters Air Force Sustainment Center at Tinker Air Force Base, detailing specifications for a Stator Actuator Cart (part number 856A1084G02). The 76th AMXG is requesting funding for two Static Rig Testers with precise technical requirements, including specific dimensional constraints (20in x 12in x 11in), weight limitations (20 lb dry), and compatibility with multiple CFM56 engine variants (2A, 2B, 2C, 3, 5A, 5B, 5C). Additional specifications include a replaceable 10-micron filter and capacity to hold at least 1.5 gallons of 1010 oil.
The document corresponds to a pre-solicitation notice (Solicitation Number: FA812525Q0080) for the procurement of two Engine Static Rig Testers, with an anticipated firm-fixed price contract and a 4-week performance period after award receipt. The acquisition is designated as a sole source requirement within NAICS code 336412, with a size standard of 1,500 employees. Contractors must be registered in the System for Award Management (SAM) to be eligible for potential award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A25-013 Static Rig Tester - BNJ Updated - CO Signed.pdf_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A25-013 Static Rig Tester
1. The 76th AMXG is requesting the utilization of funds for two (2) Static Rig Testers.
2. The requested descriptions/specifications are outlined below:
• Procure Stator Actuator Cart - 856A1084G02 which shall have the following requirements:
o Dimensions shall not be larger than 20in x 12in x 11in o No external components excluding hoses shall be outside the maximum dimensions o Not weigh more than 20 lb (dry) o Be compatible with the following engine variants
CFM56-2A
CFM56-2B
CFM56-2C
CFM56-3
CFM56-5A
CFM56-5B
CFM56-5C
o Filter Replaceable 10 microns minimum o Holds no less than 1.5 gallons of 1010 oil
File details come from the government source that posted it. Updated .