A24-053 Item Description_Redacted.pdf
PDF 164 KB Posted
- Attached to
- Pressure Power Washer Federal contract opportunity
- Solicitation number
- FA812524Q0090
About this file
This document is a Memorandum for Record describing the required specifications for seven (7) electric hot water pressure washers. The key details are:
The pressure washers must have a minimum water output of 2900 psi at 135 degrees Fahrenheit, a 480V/3ph/60hz electrical system with 85-95 amp current, a 150-foot hose with a manual rewind reel, a pistol-grip trigger gun with variable pressure lance, and various safety and operational features. The related federal contract opportunity is Solicitation FA812524Q0090 for the acquisition of these power pressure washers, to be delivered FOB to Tinker AFB, Oklahoma. Quotes are due by the closing date stated in the solicitation. Vendors must meet the technical evaluation criteria and complete all required forms and statements, including those related to FAR clauses 52.212-2, 52.209-11, and DFARS 252.209-7999.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA812524Q0090.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
August 2024
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A24-053 Pressure Washer
The 76th AMXG/569th is requesting utilization of funds for the purchase of seven (7) Pressure Washers.
The requested equipment item descriptions/specifications are outlined below.
Seven (7) Electric Hot Water Pressure Washers, with the following specifications:
Shall have a rated water output of no less than gallons per minute at no less than 2900 psi at a temperature no lower than 135 degrees Fahrenheit.
Shall have a ½” diameter pressure reducing valve installed on the inlet side of the pressure washer that is capable of handling input pressure up to 200 psi.
Shall have minimum input power requirements of 480V/3ph/60hz with an operating current 85 amps minimum and amps maximum.
Shall have an electrical cord with a 4-pole 5-wire electrical plug compatible with a Hubbell HBL5100RS1W receptacle. Cord shall be at minimum 20’ long.
Shall have an electric motor of Totally Enclosed Fan Cooled (TEFC) design with no less than horsepower.
Shall have
Shall have a NEMA 4 watertight main electrical enclosure with On/Off controls and indicator lights for the electric motor and heating element. Circuit breakers for the motor, primary transformer, and heating element circuits.
Shall have a wire braid outlet hose no shorter than 150' with diameter no less than 3/8 inch. Shorter hoses may be coupled together to attain the 150’ minimum length.
Shall have a manual rewind hose reel mounted to the cart frame. Reel shall be capable of storing the full length of hose previously described.
Shall have a pistol grip, trigger shut off gun with variable pressure lance and side handle.
Shall have three interchangeable wash tips of 0, 15, and 25 degree angles.
Shall have high temperature limit switch, pressure relief valve, water flow switch, temperature and pressure gauges.
Shall have an hour meter and shutdown timer.
Shall have a steel frame and a lifting bar with dual lifting eyes.
Shall be mounted on four (4) casters.
S
File details come from the government source that posted it. Updated .