A22_Combined Synopsis Solicitation_24Q0025.pdf

Caterpillar Machinery Repair on Multiple Machines

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.

Solicitation Number W912EE24Q0025 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This is an unrestricted solicitation. The NAICS code for this requirement is 811310 - Commercial and Industrial Machinery and Equipment

(except Automotive and Electronic) Repair and Maintenance, with a small business size standard of $12,500,000.00. This procurement is being conducted in accordance with regulations at FAR Part 12 – Acquisition of Commercial Items and FAR Part 13 – Simplified

Acquisition Procedures.

The U.S. Army Corps of Engineers, Vicksburg District, has a requirement for a contractor to provide all plant, labor, equipment, materials, and supplies as needed to perform the complete repairs to all Caterpillar equipment as listed in the scope of work. All work shall be completed within 12 months of award.

All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined non-responsive and removed from further consideration.

Offers are encouraged to review all clauses that are incorporated into this solicitation.

****SPECIAL ATTENTION SHOULD BE FOCUSED ON FAR 52.212-2 EVALUATION

– COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION

FACTORS FOR THIS REQUIREMENT. ****

The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the

Government. Offerors are encouraged to provide their best proposed pricing in their initial offer.

Notes to Offerors:

BIDDING SCHEDULE MUST BE RETURNED WITH YOUR QUOTE.

Quotes shall be submitted electronically via email, to: Genna.W.Wooten@usace.army.mil. For information concerning this solicitation, contact Genna Wooten at the above email. All technical questions must be submitted using the ProjNet system (see Section L).

• You are responsible for reading all information contained in this solicitation and all attachments if any posted with it.

• Offerors should check the SAM.gov web site often for modifications to this solicitation.

• Offerors are responsible for ensuring their quotes arrive timely.

mailto:Genna.W.Wooten@usace.army.mil

SEE ADDENDUM

(No Collect Calls)

W912EE24Q0025 30-Apr-2024

b. TELEPHONE NUMBER

601-631-5826

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 10 May 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912EE9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GENNA S WALL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

VICKSBURG CONTRACTING OFFICE

4155 CLAY ST

VICKSBURG MS 39183-3435

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W807PM 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PR W2R9 ENDIST VICKSBURG

SEE SCHEDULE

4155 CLAY ST

VICKSBURG MS 39180-3435

TEL: FAX:

601-631-7261FAX:

TEL: 601-631- SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$12,500,000

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF55

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912EE24Q0025

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each RM300 Soil Stabilizer (RSS-P3)

FFP

Serial# CATRM300HBWR00774 A contractor shall provide all plant, labor, equipment, materials, and supplies as needed to perform the complete repair to all Caterpillar equipment. All work shall be completed in accordance with the prepared statement of work. The period of performance for this contract is one (1) year from the date of the award. For administrative and closeout purposes, the overall expiration date of this contract is 30 June 2025.

FOB: Destination

PSC CD: J024

NET AMT

0002 1 Each 330 Cat Excavator (CW-EXV-P10)

FFP

Serial# MBX10543 A contractor shall provide all plant, labor, equipment, materials, and supplies as needed to perform the complete repair to all Caterpillar equipment. All work shall be completed in accordance with the prepared statement of work. The period of performance for this contract is one (1) year from the date of the award. For administrative and closeout purposes, the overall expiration date of this contract is 30 June 2025.

0003 1 Each 325 Cat Excavator (HOC-2)

FFP

Serial# 0325DHA3R00548 A contractor shall provide all plant, labor, equipment, materials, and supplies as needed to perform the complete repair to all Caterpillar equipment. All work shall be completed in accordance with the prepared statement of work. The period of performance for this contract is one (1) year from the date of the award. For administrative and closeout purposes, the overall expiration date of this contract is 30 June 2025.

Section C - Descriptions and Specifications

CAT REPAIRS

Scope of Work Puckett Machinery Repair on Multiple Machines

1. The Contractor shall provide all plant, labor, equipment, materials, and supplies as needed to perform the complete repair to all Caterpillar equipment. The contractor performing the work shall be either an authorized repair center or shall provide evidence of training and experience in performing all repairs needing done.

2. The equipment repairs shall consist as stated below and any inspections into further damage utilized to result in equipment being repaired back to original operating condition:

RM300 Soil Stabilizer (RSS-P3) Serial# CATRM300HBWR00774 -

1. Repair electrical system, to include E M, a complete wiring harness, and all sensors.

2. Perform 1000hr. SMU Maintenance.

330 Cat Excavator (CW-EXV-P10) MBX10543 -

A. Replace hydraulic boom cylinder.

B. Install all new hydraulic oil.

3. Flush hydraulic system completely to include all hydraulic components.

325 CAT Excavator (HOC-2) 0325DHA3R00548 -

1. Remove & install track assembly.

2. Remove & install track shoe (set all)

3. Remove & install 2 carrier roller (set all)

4. Remove & install track roller (set all)

5. Remove & install sprocket rim (both sides)

6. Replace undercarriage.

7. Remove & Install Travel Motors.

3. All work shall be performed at the contractors’ repair facility. Maintenance Section personnel will transport all machinery to and from contractors’ repair facility if located within the State of Mississippi (MS). Any vendors outside the state of MS will be required to pay for transportation to and from the contractors’ repair facility.

4. Prior to contract award, the contractor shall provide evidence of training and experience information and a detailed technical description of the particular items of work that will be executed in performing the repairs.

5. Only certified CAT parts will be acceptable for repairs unless CAT parts have been discontinued and only aftermarket is available. Prior authorization of OEM parts must be approved in this case.

6. If any other repairs to either of the machines are found to be needed upon disassembly of machines, it shall be quoted back to the technical point of contact. No extra repairs may be completed until the extra repairs are quoted and approved by the technical point of contact then added to contract.

7. Dealer shall have capabilities of performing 90% of all work in house reducing the need for 3rd party companies to complete rebuild scope of work in time frame allowed and controlling the quality of work performed.

Security Requirements: None

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government 0002 N/A N/A N/A Government 0003 N/A N/A N/A Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 28-MAY-2024 TO

30-JUN-2025

N/A PR W2R9 ENDIST VICKSBURG

SEE SCHEDULE

4155 CLAY ST

VICKSBURG MS 39180-3435

W807PM

0002 POP 28-MAY-2024 TO

30-JUN-2025

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 28-MAY-2024 TO

30-JUN-2025

N/A (SAME AS PREVIOUS LOCATION)

Section G - Contract Administration Data

GENERAL NOTICES

1. AUTHORITY FOR CHANGE OR MODIFICATION

“Only a warranted Contracting Officer (either a Procuring Contracting Office (PCO), or an Administrative Contracting Office (ACO)), acting within their delegated limits, has the authority to issue modifications or otherwise change the terms and conditions of the contract. If an individual other than the Contracting Officer attempts to make changes to the terms and conditions of this contract you shall not proceed with the change and shall immediately notify the Contracting Officer.”

2. ELECTRONIC FUNDS TRANSFER INFORMATION

“All vendor direct deposit and Electronic Funds Transfer (EFT) information must be entered/maintained in the System for Award Management (SAM) located at www.SAM.gov.

UFC Form 23, previously required for direct deposits/EFT payments by the Vicksburg District (MVK) is obsolete. To receive direct deposits/EFT payments, routing and banking information must be entered and maintained in SAM. Failure to update/maintain this information in SAM will result in vendors receiving payments via Treasury checks distributed by U.S. mail. The below links are provided for your information.

How do I update the banking information on my Sam.gov entity registration?

https://www.fsd.gov/gsafsd_sp?id=gsafsd_kb_articles&sys_id=003e5979dbe1259494439f95f39 619cd

What is an Electronic Funds Transfer (EFT) indicator and how do I create one?

https://www.fsd.gov/gsafsd_sp?id=gsafsd_kb_articles&sys_id=83629ecadb69e99494439f95f396

If you have further questions, please visit the Federal Service Desk (FSD) at www.FSD.gov.”

3. VETERANS EMPLOYMENT EMPHASIS FOR U.S. ARMY CORPS OF ENGINEERS

CONTRACTS

“In addition to complying with the requirements outlined in FAR Part 22.13, FAR Provision 52.222-38, FAR Clause 52.222-35, FAR Clause 52.222-37, DFARS

222.13 and Department of Labor regulations, U.S. Army Corps of Engineers (USACE) contractors and subcontractors at all tiers are encouraged to promote the training and employment of U.S. veterans while performing under a USACE contract.

While no set-aside, evaluation preference, or incentive applies to the solicitation or performance under the resultant contract, USACE contractors are encouraged to seek out highly qualified veterans to perform services under this contract. The following resources are available to assist USACE contractors in their outreach efforts:

- U.S. Department of Labor Veterans’ Employment and Training Service (VETS):

https://www.dol.gov/vets/

- Federal Veteran Employment Information: https://www.fedshirevets.gov/

- Veterans Opportunity to Work (VOW) Program: https://www.benefits.va.gov/vow/

- U.S. Army Warrior Transition Command Employment Index:

https://wct.army.mil/modules/employers/index.html

- Hiring Our Heroes: https://www.uschamberfoundation.org/hiring-our-heroes “

4. PERIOD OF PERFORMANCE:

All work shall be completed within 12 months of the award of this contract. All work must be coordinated with the Government Technical Point of Contact listed below.

5. INVOICE INSTRUCTIONS:

(1) A PROPER INVOICE MUST BE SUBMITTED IN ACCORDANCE WITH FAR 52.212-

4(g)

(2) SUBMIT INVOICE VIA EMAIL TO:

CEFC-B4invoices@usace.army.mil CEMVK-Invoices-Billings@usace.army.mil Amber.H.Reynolds@usace.army.mil

TO AVOID DELAY IN PAYMENT A COPY MUST ALSO BE SENT TO THE TECHNICAL

POC AT:

TBD

(3) IF MORE THAN ONE INVOICE IS REQUIRED, THE CONTRACTOR’S FINAL

INVOICE SHALL BE SUBMITTED WITHIN 45 DAYS AFTER THE FINAL PERIOD OF

PERFORMANCE DATE SPECIFIED IN THE CONTRACT. THE INVOICE MUST BE

CLEARLY MARKED “FINAL” AND SUBMITTED AS OUTLINED ABOVE.

6. POINTS OF CONTACT

CONTRACTOR POINT OF CONTACT:

TBD

GOVERNMENT TECHNICAL POINT OF CONTACT:

TBD

GOVERNMENT CONTRACTING POINT OF CONTACT:

Genna Wooten

PHONE: 601-631-5826

EMAIL: Genna.W.Wooten@usace.army.mil

Section H - Special Contract Requirements

WAGE RATES

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5173 Daniel W. Simms Division of | Revision No.: 27 Director Wage Determinations| Date Of Last Revision: 12/26/2023

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Mississippi

Area: Mississippi Counties of Adams, Amite, Claiborne, Franklin, Jefferson, Lawrence, Lincoln, Pike, Walthall, Warren, Wilkinson

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.83*** 01012 - Accounting Clerk II 17.78 01013 - Accounting Clerk III 19.88 01020 - Administrative Assistant 20.62 01035 - Court Reporter 17.17*** 01041 - Customer Service Representative I 13.29*** 01042 - Customer Service Representative II 14.50*** 01043 - Customer Service Representative III 16.29*** 01051 - Data Entry Operator I 12.14***

01052 - Data Entry Operator II 13.25*** 01060 - Dispatcher, Motor Vehicle 23.14 01070 - Document Preparation Clerk 13.25*** 01090 - Duplicating Machine Operator 13.25*** 01111 - General Clerk I 13.56*** 01112 - General Clerk II 14.80*** 01113 - General Clerk III 16.62*** 01120 - Housing Referral Assistant 18.55 01141 - Messenger Courier 10.80*** 01191 - Order Clerk I 12.14*** 01192 - Order Clerk II 13.84*** 01261 - Personnel Assistant (Employment) I 14.88*** 01262 - Personnel Assistant (Employment) II 16.64*** 01263 - Personnel Assistant (Employment) III 18.55 01270 - Production Control Clerk 21.92 01290 - Rental Clerk 14.52*** 01300 - Scheduler, Maintenance 14.88*** 01311 - Secretary I 14.88*** 01312 - Secretary II 16.64*** 01313 - Secretary III 18.55 01320 - Service Order Dispatcher 20.45 01410 - Supply Technician 20.62 01420 - Survey Worker 13.58*** 01460 - Switchboard Operator/Receptionist 13.33*** 01531 - Travel Clerk I 12.84*** 01532 - Travel Clerk II 13.59*** 01533 - Travel Clerk III 15.30*** 01611 - Word Processor I 13.25*** 01612 - Word Processor II 14.88*** 01613 - Word Processor III 16.64*** 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 20.42 05010 - Automotive Electrician 17.21 05040 - Automotive Glass Installer 16.21*** 05070 - Automotive Worker 16.21*** 05110 - Mobile Equipment Servicer 14.24*** 05130 - Motor Equipment Metal Mechanic 18.37 05160 - Motor Equipment Metal Worker 16.21*** 05190 - Motor Vehicle Mechanic 18.37 05220 - Motor Vehicle Mechanic Helper 13.16*** 05250 - Motor Vehicle Upholstery Worker 15.14*** 05280 - Motor Vehicle Wrecker 16.21*** 05310 - Painter, Automotive 17.21 05340 - Radiator Repair Specialist 16.21*** 05370 - Tire Repairer 13.59*** 05400 - Transmission Repair Specialist 18.37 07000 - Food Preparation And Service Occupations 07010 - Baker 12.31*** 07041 - Cook I 10.81*** 07042 - Cook II 12.71*** 07070 - Dishwasher 9.68*** 07130 - Food Service Worker 9.50*** 07210 - Meat Cutter 13.64*** 07260 - Waiter/Waitress 8.98*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.96 09040 - Furniture Handler 11.67*** 09080 - Furniture Refinisher 19.96 09090 - Furniture Refinisher Helper 14.52*** 09110 - Furniture Repairer, Minor 17.36 09130 - Upholsterer 19.96 11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 11.46*** 11060 - Elevator Operator 11.46*** 11090 - Gardener 18.08 11122 - Housekeeping Aide 10.75*** 11150 - Janitor 10.75*** 11210 - Laborer, Grounds Maintenance 13.05*** 11240 - Maid or Houseman 10.04*** 11260 - Pruner 11.47*** 11270 - Tractor Operator 16.37*** 11330 - Trail Maintenance Worker 13.05*** 11360 - Window Cleaner 12.21*** 12000 - Health Occupations 12010 - Ambulance Driver 19.61 12011 - Breath Alcohol Technician 19.61 12012 - Certified Occupational Therapist Assistant 29.73 12015 - Certified Physical Therapist Assistant 29.89 12020 - Dental Assistant 16.89*** 12025 - Dental Hygienist 30.04 12030 - EKG Technician 29.72 12035 - Electroneurodiagnostic Technologist 29.72 12040 - Emergency Medical Technician 19.61 12071 - Licensed Practical Nurse I 17.53 12072 - Licensed Practical Nurse II 19.61 12073 - Licensed Practical Nurse III 21.86 12100 - Medical Assistant 14.09*** 12130 - Medical Laboratory Technician 22.61 12160 - Medical Record Clerk 15.35*** 12190 - Medical Record Technician 17.16*** 12195 - Medical Transcriptionist 17.53 12210 - Nuclear Medicine Technologist 43.10 12221 - Nursing Assistant I 11.80*** 12222 - Nursing Assistant II 13.27*** 12223 - Nursing Assistant III 14.48*** 12224 - Nursing Assistant IV 16.26*** 12235 - Optical Dispenser 19.61 12236 - Optical Technician 17.53 12250 - Pharmacy Technician 16.61*** 12280 - Phlebotomist 15.66*** 12305 - Radiologic Technologist 22.63 12311 - Registered Nurse I 23.94 12312 - Registered Nurse II 29.27 12313 - Registered Nurse II, Specialist 29.27 12314 - Registered Nurse III 35.41 12315 - Registered Nurse III, Anesthetist 35.41 12316 - Registered Nurse IV 42.45 12317 - Scheduler (Drug and Alcohol Testing) 24.30 12320 - Substance Abuse Treatment Counselor 16.26*** 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.19 13012 - Exhibits Specialist II 22.54 13013 - Exhibits Specialist III 27.57 13041 - Illustrator I 18.19 13042 - Illustrator II 22.54 13043 - Illustrator III 27.57 13047 - Librarian 24.96 13050 - Library Aide/Clerk 14.34*** 13054 - Library Information Technology Systems 22.54 Administrator 13058 - Library Technician 16.72*** 13061 - Media Specialist I 16.27*** 13062 - Media Specialist II 18.19 13063 - Media Specialist III 20.28

13071 - Photographer I 16.27*** 13072 - Photographer II 18.19 13073 - Photographer III 22.54 13074 - Photographer IV 27.57 13075 - Photographer V 33.36 13090 - Technical Order Library Clerk 18.01 13110 - Video Teleconference Technician 16.44*** 14000 - Information Technology Occupations 14041 - Computer Operator I 18.24 14042 - Computer Operator II 20.41 14043 - Computer Operator III 23.25 14044 - Computer Operator IV 29.71 14045 - Computer Operator V 29.92 14071 - Computer Programmer I (see 1) 20.08 14072 - Computer Programmer II (see 1) 24.87 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.24 14160 - Personal Computer Support Technician 29.71 14170 - System Support Specialist 26.74 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 30.78 15020 - Aircrew Training Devices Instructor (Rated) 37.23 15030 - Air Crew Training Devices Instructor (Pilot) 44.64 15050 - Computer Based Training Specialist / Instructor 30.78 15060 - Educational Technologist 31.10 15070 - Flight Instructor (Pilot) 44.64 15080 - Graphic Artist 31.81 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 44.64 15086 - Maintenance Test Pilot, Rotary Wing 44.64 15088 - Non-Maintenance Test/Co-Pilot 44.64 15090 - Technical Instructor 25.99 15095 - Technical Instructor/Course Developer 31.81 15110 - Test Proctor 21.00 15120 - Tutor 21.00 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.67*** 16030 - Counter Attendant 9.67*** 16040 - Dry Cleaner 11.28*** 16070 - Finisher, Flatwork, Machine 9.67*** 16090 - Presser, Hand 9.67*** 16110 - Presser, Machine, Drycleaning 9.67*** 16130 - Presser, Machine, Shirts 9.67*** 16160 - Presser, Machine, Wearing Apparel, Laundry 9.67*** 16190 - Sewing Machine Operator 11.85*** 16220 - Tailor 12.39*** 16250 - Washer, Machine 10.20*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.59 19040 - Tool And Die Maker 27.80 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.18 21030 - Material Coordinator 21.92 21040 - Material Expediter 21.92 21050 - Material Handling Laborer 13.93*** 21071 - Order Filler 13.64*** 21080 - Production Line Worker (Food Processing) 19.18 21110 - Shipping Packer 16.16*** 21130 - Shipping/Receiving Clerk 16.16***

21140 - Store Worker I 11.73*** 21150 - Stock Clerk 17.35 21210 - Tools And Parts Attendant 19.18 21410 - Warehouse Specialist 19.18 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.43 23019 - Aircraft Logs and Records Technician 19.65 23021 - Aircraft Mechanic I 24.11 23022 - Aircraft Mechanic II 25.43 23023 - Aircraft Mechanic III 26.63 23040 - Aircraft Mechanic Helper 16.42*** 23050 - Aircraft, Painter 22.59 23060 - Aircraft Servicer 19.65 23070 - Aircraft Survival Flight Equipment Technician 22.59 23080 - Aircraft Worker 21.22 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 21.22 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 24.11

II

23110 - Appliance Mechanic 22.59 23120 - Bicycle Repairer 18.06 23125 - Cable Splicer 36.92 23130 - Carpenter, Maintenance 20.90 23140 - Carpet Layer 21.22 23160 - Electrician, Maintenance 25.59 23181 - Electronics Technician Maintenance I 21.22 23182 - Electronics Technician Maintenance II 22.59 23183 - Electronics Technician Maintenance III 24.11 23260 - Fabric Worker 19.65 23290 - Fire Alarm System Mechanic 24.11 23310 - Fire Extinguisher Repairer 18.06 23311 - Fuel Distribution System Mechanic 24.11 23312 - Fuel Distribution System Operator 18.06 23370 - General Maintenance Worker 16.27*** 23380 - Ground Support Equipment Mechanic 24.11 23381 - Ground Support Equipment Servicer 19.65 23382 - Ground Support Equipment Worker 21.22 23391 - Gunsmith I 18.06 23392 - Gunsmith II 21.22 23393 - Gunsmith III 24.11 23410 - Heating, Ventilation And Air-Conditioning 17.93 Mechanic 23411 - Heating, Ventilation And Air Contidioning 18.90 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 23.61 23440 - Heavy Equipment Operator 20.44 23460 - Instrument Mechanic 24.11 23465 - Laboratory/Shelter Mechanic 22.59 23470 - Laborer 13.93*** 23510 - Locksmith 22.59 23530 - Machinery Maintenance Mechanic 25.80 23550 - Machinist, Maintenance 21.35 23580 - Maintenance Trades Helper 13.00*** 23591 - Metrology Technician I 24.11 23592 - Metrology Technician II 25.43 23593 - Metrology Technician III 26.63 23640 - Millwright 25.22 23710 - Office Appliance Repairer 22.59 23760 - Painter, Maintenance 17.20 23790 - Pipefitter, Maintenance 23.52 23810 - Plumber, Maintenance 22.04 23820 - Pneudraulic Systems Mechanic 24.11

23850 - Rigger 24.11 23870 - Scale Mechanic 21.22 23890 - Sheet-Metal Worker, Maintenance 24.11 23910 - Small Engine Mechanic 21.22 23931 - Telecommunications Mechanic I 34.30 23932 - Telecommunications Mechanic II 36.18 23950 - Telephone Lineman 24.11 23960 - Welder, Combination, Maintenance 21.96 23965 - Well Driller 24.11 23970 - Woodcraft Worker 24.11 23980 - Woodworker 18.06 24000 - Personal Needs Occupations 24550 - Case Manager 13.86*** 24570 - Child Care Attendant 9.79*** 24580 - Child Care Center Clerk 12.21*** 24610 - Chore Aide 10.62*** 24620 - Family Readiness And Support Services 13.86*** Coordinator 24630 - Homemaker 13.86*** 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.23 25040 - Sewage Plant Operator 17.66 25070 - Stationary Engineer 25.23 25190 - Ventilation Equipment Tender 17.19*** 25210 - Water Treatment Plant Operator 17.66 27000 - Protective Service Occupations 27004 - Alarm Monitor 13.84*** 27007 - Baggage Inspector 12.26*** 27008 - Corrections Officer 13.86*** 27010 - Court Security Officer 15.34*** 27030 - Detection Dog Handler 13.71*** 27040 - Detention Officer 13.86*** 27070 - Firefighter 16.94*** 27101 - Guard I 12.26*** 27102 - Guard II 13.71*** 27131 - Police Officer I 17.84 27132 - Police Officer II 19.83 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 19.45 28042 - Carnival Equipment Repairer 21.31 28043 - Carnival Worker 13.78*** 28210 - Gate Attendant/Gate Tender 15.40*** 28310 - Lifeguard 13.32*** 28350 - Park Attendant (Aide) 17.23 28510 - Recreation Aide/Health Facility Attendant 12.57*** 28515 - Recreation Specialist 20.05 28630 - Sports Official 13.72*** 28690 - Swimming Pool Operator 25.65 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.70 29020 - Hatch Tender 24.70 29030 - Line Handler 24.70 29041 - Stevedore I 22.84 29042 - Stevedore II 26.25 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 43.06 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 29.69 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 32.70 30021 - Archeological Technician I 20.89 30022 - Archeological Technician II 23.38 30023 - Archeological Technician III 28.96 30030 - Cartographic Technician 28.96

30040 - Civil Engineering Technician 18.16 30051 - Cryogenic Technician I 32.07 30052 - Cryogenic Technician II 35.43 30061 - Drafter/CAD Operator I 20.89 30062 - Drafter/CAD Operator II 23.38 30063 - Drafter/CAD Operator III 26.06 30064 - Drafter/CAD Operator IV 32.07 30081 - Engineering Technician I 18.61 30082 - Engineering Technician II 20.89 30083 - Engineering Technician III 23.38 30084 - Engineering Technician IV 28.96 30085 - Engineering Technician V 35.43 30086 - Engineering Technician VI 42.86 30090 - Environmental Technician 28.96 30095 - Evidence Control Specialist 28.96 30210 - Laboratory Technician 26.62 30221 - Latent Fingerprint Technician I 32.07 30222 - Latent Fingerprint Technician II 35.43 30240 - Mathematical Technician 28.96 30361 - Paralegal/Legal Assistant I 19.84 30362 - Paralegal/Legal Assistant II 24.58 30363 - Paralegal/Legal Assistant III 30.07 30364 - Paralegal/Legal Assistant IV 36.38 30375 - Petroleum Supply Specialist 35.43 30390 - Photo-Optics Technician 28.96 30395 - Radiation Control Technician 35.43 30461 - Technical Writer I 28.96 30462 - Technical Writer II 35.43 30463 - Technical Writer III 42.86 30491 - Unexploded Ordnance (UXO) Technician I 27.37 30492 - Unexploded Ordnance (UXO) Technician II 33.11 30493 - Unexploded Ordnance (UXO) Technician III 39.69 30494 - Unexploded (UXO) Safety Escort 27.37 30495 - Unexploded (UXO) Sweep Personnel 27.37 30501 - Weather Forecaster I 32.07 30502 - Weather Forecaster II 39.02 30620 - Weather Observer, Combined Upper Air Or (see 2) 26.06 Surface Programs 30621 - Weather Observer, Senior (see 2) 28.96 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 33.11 31020 - Bus Aide 13.08*** 31030 - Bus Driver 19.45 31043 - Driver Courier 15.25*** 31260 - Parking and Lot Attendant 11.62*** 31290 - Shuttle Bus Driver 13.84*** 31310 - Taxi Driver 11.98*** 31361 - Truckdriver, Light 16.74*** 31362 - Truckdriver, Medium 18.29 31363 - Truckdriver, Heavy 22.24 31364 - Truckdriver, Tractor-Trailer 22.24 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 16.14*** 99030 - Cashier 9.75*** 99050 - Desk Clerk 10.15*** 99095 - Embalmer 27.37 99130 - Flight Follower 27.37 99251 - Laboratory Animal Caretaker I 18.71 99252 - Laboratory Animal Caretaker II 20.55 99260 - Marketing Analyst 26.17 99310 - Mortician 27.37 99410 - Pest Controller 18.63

99510 - Photofinishing Worker 14.38*** 99710 - Recycling Laborer 17.38 99711 - Recycling Specialist 21.60 99730 - Refuse Collector 15.28*** 99810 - Sales Clerk 12.64*** 99820 - School Crossing Guard 13.62*** 99830 - Survey Party Chief 24.60 99831 - Surveying Aide 17.89 99832 - Surveying Technician 22.36 99840 - Vending Machine Attendant 13.54*** 99841 - Vending Machine Repairer 16.62*** 99842 - Vending Machine Repairer Helper 13.54***

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.98 per hour, up to 40 hours per week, or $199.20 per week or $863.20 per month

HEALTH & WELFARE EO 13706: $4.57 per hour, up to 40 hours per week, or $182.80 per week, or $792.13 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin

Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of ""wash and wear"" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

NOV 2021

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.222-19 Child Labor -- Cooperation with Authorities and Remedies FEB 2024 52.223-6 Drug-Free Workplace MAY 2001 52.232-1 Payments APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.237-1 Site Visit APR 1984 52.253-1 Computer Generated Forms JAN 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement

JAN 2023

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7012 Preference For Certain Domestic Commodities APR 2022 252.225-7048 Export-Controlled Items JUN 2013 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.

JAN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2023)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers.