A22_Combined Synopsis Solicitation_22Q0060_Rope Access.pdf

ROPE ACCESS RIGGING AND SAFETY SUPERVISION OF BRIDGES

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.

Solicitation Number W912EE23Q0060 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under a 100%

Small Business Set Aside. The NAICS code for this procurement is 541690, Other Scientific and Technical Consulting Services, with a small business size determination of

$19,000,000.00 in annual revenue. This procurement is being conducted in accordance with regulations at FAR Part 12 – Acquisition of Commercial Items and FAR Part 13 – Simplified

Acquisition Procedures.

The U.S. Army Corps of Engineers, Vicksburg District, requirement for rope access rigging and safety supervision in support of a USACE inspection team at the Newburgh Lock and

Dam, Cannelton Lock and Dam, McAlpine Lock and Dam, and Tensas Cocodrie Pumping

Plant.

All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined non-responsive and removed from further consideration.

Offers are encouraged to review all clauses that are incorporated into this solicitation.

****SPECIAL ATTENTION SHOULD BE FOCUSED ON FAR 52.212-2 EVALUATION

– COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION

FACTORS FOR THIS REQUIREMENT. ****

The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the

Government. Offerors are encouraged to provide their best proposed pricing in their initial offer.

Notes to Offerors:

BIDDING SCHEDULE MUST BE RETURNED WITH YOUR QUOTE.

Quotes shall be submitted electronically via email, to: Genna.S.Wall@usace.army.mil. For information concerning this solicitation, contact Genna S. Wall at the above email. All technical questions must be submitted using the ProjNet system (see below).

• You are responsible for reading all information contained in this solicitation and all attachments if any posted with it.

• Offerors should check the SAM.gov web site often for modifications to this solicitation.

• Offerors are responsible for ensuring their quotes arrive timely.

mailto:Genna.S.Wall@usace.army.mil

TECHNICAL INQUIRIES AND QUESTIONS

Technical inquiries and questions relating to this solicitation are to be submitted via Bidder

Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be proivded. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access.

ProjNet Title: W912EE23Q0060, Rope Access Services

The Bidder/Offeror Inquiry Key is: 6Z7RWA-HCC6RU

Specific Instructions for ProjNet Bid Inquiry Access:

1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

2. Identify the Agency. This should be marked as USACE.

3. Key. Enter the Bidder Inquiry Key listed above.

4. Email. Enter the email address you would like to use for communication.

5. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form.

6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system.

7. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

Bidders/Offerors are requested to review the specification in its entirety, review the Bidder

Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

https://www.projnet.org/

SEE ADDENDUM

(No Collect Calls)

W912EE23Q0060 03-Jul-2023

b. TELEPHONE NUMBER

601-631-5826

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 18 Jul 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912EE9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GENNA S WALL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

VICKSBURG CONTRACTING OFFICE

4155 CLAY ST

VICKSBURG MS 39183-3435

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W807PM 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PR W2R9 ENDIST VICKSBURG

SEE SCHEDULE

4155 CLAY ST

VICKSBURG MS 39180-3435

TEL: FAX:

601-631-7261FAX:

TEL: 601-631- SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$19,000,000

NAICS:

541690

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF89

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912EE23Q0060

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Rope Rigging Services Inspection #1

FFP

The contractor will provide rigging and safety supervision for a rope access inspection team of four (4) certified SPRAT Level I and II USACE inspectors at Newburgh Lock and Dam, Cannelton Lock and Dam, and McAlpine Lock and Dam. All works shall be completed in accordance with the statement of work and the contractors quote dated __________.

FOB: Destination

PSC CD: R499

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job Rope Rigging Services Inspection #2

FFP

The contractor will provide rigging and safety supervision for a rope access inspection team of four (4) certified SPRAT Level I and II USACE inspectors at Tensas Cocodrie Pumping Plant. All works shall be completed in accordance with the statement of work and the contractors quote dated __________.

PSC CD: R499

NET AMT

Section C - Descriptions and Specifications

ROPE ACCESS SERVICES

21 June 2023

SCOPE OF WORK

Rope Access Rigging and Safety Supervision of

Inspections on Bridges.

1. TECHNICAL SCOPE

1.1 General: USACE must conduct one (1) structural inspection using rope access.

1.1.1 Inspection 1: This inspection includes one (1) crane service bridge at Newburgh

Locks and Dam, (1) crane service bridge at Cannelton Locks and Dam, and (2) crane service bridges at McAlpine Locks and Dam.

1.1.2 Inspection 2: This inspection includes 5 vertical lift gates (5) on the riverside of Tensas Cocodrie Pumping Plant.

Inspection # USACE Structure Approximate Location

Newburgh Locks and Dam Newburgh, IN Cannelton Locks and Dam Cannelton, IN McAlpine Locks and Dam Louisville, KY

2 Tensas Cocodrie Pumping Plant Jonesville, LA See Attachment 1 for GPS coordinates and Overview Map.

1.2 Services Required: The contractor will be required to provide the following services for the inspection.

1.2.1 Inspection 1: The contractor will provide rigging and safety supervision for a rope access inspection team of four (4) certified SPRAT Level I and II USACE inspectors. This inspection includes four (4) crane service bridges. The approximate dimensions for each bridge are as follows: Newburgh (approx. 1500 feet total in 11 spans), Cannelton (approx. 1400 feet total in 12 spans), McAlpine Lower (approx. 475 feet total in 4 spans), McAlpine Upper (approx. 600 feet total in 5 spans).

a) one (1) SPRAT certified Level III Rope Access Supervisor to perform the following duties: Develop effective rigging and safety plan, supply all necessary rescue/rigging and rope access equipment, perform safety oversight, and provide potential rescue services for U.S. Army Corps of Engineers (USACE) structural engineers inspecting the bridges.

1.2.2 Inspection 2: The contractor will provide rigging and safety supervision for a rope access inspection team of four (4) certified SPRAT Level I and II USACE inspectors. This inspection includes five (5) vertical lift gates.

b) one (1) SPRAT certified Level III Rope Access Supervisor to perform the following duties: Develop effective rigging and safety plan, supply all necessary rescue/rigging and rope access equipment, perform safety oversight, and provide potential rescue services for U.S. Army Corps of Engineers (USACE) structural engineers inspecting the gates.

1.3 Duration and dates: The contract period of performance is 01 August – 30

September 2023. This is due to the uncertainty in weather conditions, mechanical issues with gate lifting devices, etc. Workdays will consist of up to ten (10) hour days, with the possibility to work up to eleven (11) hours per workday. If all days are not required to complete the work, a modification will be completed to descope the contract to reflect the number of days actually worked. Overtime pay will be paid for hours worked in excess of 40 hours in a workweek. The tentative inspection dates are scheduled for the dates listed in the table below, but are subject to change due to water levels, weather, mechanical issues with lifting devices, etc. Mobilization and demobilization to and from the project is intended to be outside of the inspection days.

Structure Number of Bridges/Gates

Tentative Inspection Dates

Includes

Required Services

Newburgh Crane Service Bridge

07-09 August

(1) Rope Access Safety Supervisor

Cannelton Crane Service Bridge

10-12 August

(1) Rope Access Safety Supervisor

McAlpine Upper and Lower Crane Service Bridges

14-16 August

(1) Rope Access Safety Supervisor

Tensas Cocodrie Pumping Plant

22-23 August

(1) Rope Access Safety Supervisor

1.3.1 Inspection: Contract includes eleven (11) days total of Rope Access Safety

Supervisory. NO inspection/rope access work will be performed on Sunday,13 August 2023.

1.4 Detailed Requirements – Base Contract: The Contractor must complete the following tasks:

1.4.1 Development of Job Hazard Analysis (JHA). The Contractor must coordinate with the USACE technical POC to develop and provide the JHA, including rescue plan, and host a pre-work safety briefing before inspection work commences for each inspection. A preliminary JHA for each inspection must be developed to the extent possible with information available prior to the inspection and must be submitted to the USACE as a draft no less than four (4) days prior to each inspection. The JHA must be completed on site by the Contractor with USACE and facility POC input, reviewed and signed by all applicable parties at the pre-work safety briefing prior to the inspection. Prior to conducting any rope access work before each shift, the Contractor must hold documented safety meetings, rescue pre-planning, and complete and provide Job Hazard Analysis forms.

1.4.2 Coordination. The Contractor must ensure that the inspection is coordinated with the USACE technical POC. The Contractor’s Rope Access Supervisor must participate in a teleconference (approximately one (1) hour duration) with members of the inspection team and USACE project personnel at least one (1) week prior to the commencement of the work to discuss the rigging plan, equipment needs, and other logistics.

1.4.3 Safety Supervision. The Level III Team Leader/Rope Access Supervisor must provide safety supervision of Level I certified inspectors performing inspection via rope access. The inspection team will include up to four (4) USACE inspectors.

The safety supervision will include ensuring proper rigging strategies and all actions are in accordance with requirements outlined in SPRAT industry standards and as outlined in the USACE Safety Manual referenced herein.

1.4.4 Rigging/Access Plan and Equipment. The Contractor must develop a comprehensive rigging and access plan to allow up to four (4) USACE inspectors to perform hands-on close-up visual inspection of all bridges, including but not limited to, the bridge beams, bridge bearings, bridge sway bracing, etc.

Contractor must provide the following rigging equipment, at a minimum: ropes, rope protection (including rope protector for metal grating), anchors (webbing, metal slings, carabiners, beam sliders, etc.), and all other equipment appropriate for descending, ascending, and rescue. Contractor must ensure that sufficient rigging is available for up to four (4) USACE inspectors to be on the ropes at any one time with extra rigging equipment available to facilitate moving to the next inspection point (next bridge span/gate) to minimize the down time of the USACE inspection team. In addition, the Contractor is responsible for providing his own rope access equipment and any equipment necessary for a potential rescue scenario. All four (4) USACE inspectors are SPRAT Level I and II certified and will provide their own personal gear to include multi-purpose harness, two safety backup devices, ascenders, descender, and appropriate PPE.

1.4.5 Personnel Experience Requirements. In addition to the SPRAT certification requirements, the Level III Supervisor must have previous experience as Level III on a minimum of 2 similar structural inspection jobs. The names, qualifications, and previous experience records of the proposed technicians that may be assigned to this project, to include SPRAT certifications and work experience must be submitted to USACE with the Contractor’s cost proposal.

1.5 Limiting Criteria: All equipment must meet or exceed OSHA and ANSI requirements and be in accordance with applicable SPRAT standards and the Corps of Engineers Manual EM 385-1-1, entitled Safety and Health Requirements Manual, dated 30 November 2014. Contractor personnel must follow comprehensive safety guidelines for rope access in accordance with SPRAT requirements as applicable for quality assurance, safety, training, documentation and working practices.

1.6 USACE Technical Point of Contact: Jack Hinton, CEMVK-ECD-S, 601-631-5923.

1.7 Summary of required information to be submitted at the time of bid:

1.7.1 Cost quote for total contract. Include detail travel expenses in accordance with Joint Travel Regulations (JTR).

1.7.2 Statement of understanding of the specified work.

1.7.3 Names of potential technicians to be assigned the specified work per paragraph 1.4.3.

1.7.4 SPRAT Certifications of potential technicians per paragraph 1.4.3.

1.7.5 Experience Qualifications per paragraph 1.4.5.

2. ANTITERRORISM/OPERATIONS SECURITY REQUIREMENTS

2.1 General security requirements and guidance: The security requirements described below apply to all contract personnel (including employees of the prime Contractor (“Contractor”) and all subcontractor employees) supporting the performance requirements of this contract. The Contractor is responsible for compliance with these security requirements. Questions regarding security matters shall be addressed to the designated Government representative (e.g., Contracting Officer Representative (COR), Requiring Activity (RA) representative, or Contracting Officer (if a COR or other RA representative is not appointed)). Contract personnel are critical to the overall security and safety of US Army Corps of Engineers (USACE) installations, facilities and activities, and security awareness training contributes to those efforts. The Department of Defense (DoD) and Army security training requirements specified below, if applicable, are performance requirements; all applicable contract personnel shall complete initial training within 30 days of contract award or the date new contract personnel begin performance on the contract. Within five business days from the completion of training, the Contractor shall provide written documentation (e.g., email or memorandum) to the Government representative. The documentation shall include the names of contract personnel trained and which training they completed; the Contractor shall maintain training records as part of their contract files and be prepared to provide copies of training certificates to the Government representative. Contractor personnel and vehicles are subject to search when entering federal installations. Additionally, all contract personnel shall comply with Force Protection Condition (FPCON) measures, Random Antiterrorism Measures (commonly referred to as “RAMs”), and Health Protection Condition (HPCON) measures. The Contractor is responsible for meeting performance requirements during elevated FPCON and/or HPCON levels in accordance with applicable RA plans and procedures --this includes identifying mission essential and non-mission essential personnel. In addition to the changes otherwise authorized by the changes clause of this contract, should the FPCON or HPCON levels at any individual facility or installation change, the Government may implement security changes that affect contract personnel. The Contractor shall ensure all contract personnel are aware of their security responsibilities, including any site-specific requirements identified in local policies or procedures.

2.2 Antiterrorism (AT) Level 1 Training: All contract personnel requiring routine access to Army installations, facilities, and controlled access areas, or requiring network access shall complete initial and annual refresher AT Level I awareness training. Online AT Level I awareness training is available at https://jko.jten.mil/ (website subject to change).

2.3 Physical security and access control requirements: All contract personnel requiring physical access to a federal installation or facility shall comply with the access control procedures of that location. Contract personnel requiring unescorted access to meet contract performance requirements on a DoD installation in the US shall be vetted by the installation/facility Provost Marshal/Directorate of Emergency Services/Security Office using the National Crime Information Center-Interstate Identification Index (commonly referred to as “NCIC-III”) and Terrorist Screening Database (commonly referred to as “TSDB”). Contract personnel shall comply with all personal identity verification requirements specified in installation/facility policies and procedures.

Contract personnel who do not meet requirements for unescorted access to USACE facilities shall coordinate escorted access with the Government representative, as needed. Contract personnel who receive keys, access cards, or lock combinations that provide access to government-owned property shall comply with key and lock control procedures of the RA.

2.4 Suspicious Activity Reporting training (e.g. iWATCH, CorpsWatch, or See Something, Say Something): All contract personnel shall receive initial and annual refresher training from the RA representative on the local suspicious activity reporting program. This locally developed training provides contract personnel with general information on suspicious behavior, and guidance on reporting suspicious activity to the project manager, security representative or law enforcement entity.

2.5 Escorting in classified and/or sensitive areas: In accordance with applicable regulations, all contract personnel who do not possess the appropriate security clearance or access privileges will be escorted in areas where they may be exposed to classified information or operations, sensitive information or activities, or restricted areas.

2.6 Pre-screen candidates using E-Verify Program: Contractors shall comply with the requirements set forth in FAR clause 52.222-54 Employment Eligibility Verification and FAR Subpart 22.18 in using the E-Verify Program at (https://www.e-verify.gov/) (website subject to change) to meet the contract employment eligibility requirements.

Contractors are encouraged to cooperate with Federal and State agencies responsible for enforcing labor requirements to include eligibility for employment under United

States immigration laws in accordance with FAR 22.102-1(i). An initial list of verified/eligible candidates shall be provided to the COR no later than three business days after the initial contract award. When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, and submit it to the Contracting Officer to become part of the official contract file.

----End of Scope---

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government 0002 N/A N/A N/A Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 07-AUG-2023 TO

16-AUG-2023

N/A PR W2R9 ENDIST VICKSBURG

SEE SCHEDULE

4155 CLAY ST

VICKSBURG MS 39180-3435

W807PM

0002 POP 22-AUG-2023 TO

23-AUG-2023

N/A (SAME AS PREVIOUS LOCATION)

W807PM

Section G - Contract Administration Data

GENERAL NOTICES

General Notices

Authority for Change or Modification

“Only a warranted Contracting Officer (either a Procuring Contracting Office (PCO), or an Administrative Contracting Office (ACO)), acting within their delegated limits, has the authority to issue modifications or otherwise change the terms and conditions of the contract. If an individual other than the Contracting Officer attempts to make changes to the terms and conditions of this contract you shall not proceed with the change and shall immediately notify the Contracting Officer.”

Electronic Funds Transfer Information

“All vendor direct deposit and Electronic Funds Transfer (EFT) information must be entered/maintained in the System for Award Management (SAM) located at www.SAM.gov.

UFC Form 23, previously required for direct deposits/EFT payments by the Vicksburg District (MVK) is obsolete. To receive direct deposits/EFT payments, routing and banking information must be entered and maintained in SAM. Failure to update/maintain this information in SAM will result in vendors receiving payments via Treasury checks distributed by U.S. mail. The below links are provided for your information.

How do I update the banking information on my Sam.gov entity registration?

https://www.fsd.gov/gsafsd_sp?id=gsafsd_kb_articles&sys_id=003e5979dbe1259494439f95f39 619cd

What is an Electronic Funds Transfer (EFT) indicator and how do I create one?

https://www.fsd.gov/gsafsd_sp?id=gsafsd_kb_articles&sys_id=83629ecadb69e99494439f95f396

If you have further questions, please visit the Federal Service Desk (FSD) at www.FSD.gov.”

If applicable:

Reference Limitations on Subcontracting FAR 52.219-14. This procurement is 100% total small business set-aside under NACIS Code 541690. The awardee of this contract shall comply with all requirements up to and including the following:

Services (except construction): Contractor will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract.

Supplies (other than procurement from a nonmanufacturer of such supplies): Contractor will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract.

General construction: Contractor will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded.

Construction by special trade contractors: Contractor will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

Upon the Contracting Officer’s request, the Contractor shall submit a report to the Contracting Officer documenting compliance with FAR 52.2l9-l4. If the Contractor is using Similarly Situated Entities, it must be clearly identifiable in the submitted reports. If the required percentage is not being met the Contractor shall also include, with the semiannual report, a plan to meet the required percentage before the contract end date.

Instructions for Calculation of the Cost of Contract Performance Incurred for Personnel in Accordance with 'Limitations on Subcontracting' (FAR 52.219-14):

Clearly describe the Work to be Performed by Prime Personnel and/or Similarly Situated Entities:

Show Calculation of the Cost of Contract Performance Incurred for Personnel:

1. Total cost of contract = $

2. Total cost of performance by Prime and it’s similarly saturated entities = $

3. Percentage of Contract Performance Incurred by Prime Personnel and/or Similarly Situated Entities = (Line 1 / Line 2) X 100 = %

Period of Performance: All work shall be completed by August 23, 2023 All work must be coordinated with the Government Technical Point of Contact listed below.

INVOICE INSTRUCTIONS:

(1) A PROPER INVOICE MUST BE SUBMITTED IN ACCORDANCE WITH FAR 52.212-

4(g)

(2) SUBMIT INVOICE VIA EMAIL TO:

CEFC-B4invoices@usace.army.mil CEMVK-Invoices-Billings@usace.army.mil Amber.H.Reynolds@usace.army.mil

TO AVOID DELAY IN PAYMENT A COPY MUST ALSO BE SENT TO THE TECHNICAL

POC AT:

TBD

(3) IF MORE THAN ONE INVOICE IS REQUIRED, THE CONTRACTOR’S FINAL

INVOICE SHALL BE SUBMITTED WITHIN 45 DAYS AFTER THE FINAL PERIOD OF

PERFORMANCE DATE SPECIFIED IN THE CONTRACT. THE INVOICE MUST BE

CLEARLY MARKED “FINAL” AND SUBMITTED AS OUTLINED ABOVE.

CONTRACTOR POINT OF CONTACT:

TBD

GOVERNMENT TECHNICAL POINT OF CONTACT:

TBD

GOVERNMENT CONTRACTING POINT OF CONTACT:

Genna Wall

PHONE: 601-631-5826

EMAIL: Genna.S.Wall@usace.army.mil

Section H - Special Contract Requirements

WAGE RATES, 2015-4713

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4713 Daniel W. Simms Division of | Revision No.: 19 Director Wage Determinations| Date Of Last Revision: 12/27/2022

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $16.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2023. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.15 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2023. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

States: Indiana, Kentucky

Area: Indiana Counties of Posey, Vanderburgh, Warrick Kentucky County of Henderson

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.98*** 01012 - Accounting Clerk II 16.82 01013 - Accounting Clerk III 18.81 01020 - Administrative Assistant 27.53 01035 - Court Reporter 22.60 01041 - Customer Service Representative I 13.61*** 01042 - Customer Service Representative II 15.03*** 01043 - Customer Service Representative III 16.68 01051 - Data Entry Operator I 13.20***

01052 - Data Entry Operator II 14.40*** 01060 - Dispatcher, Motor Vehicle 18.92 01070 - Document Preparation Clerk 14.68*** 01090 - Duplicating Machine Operator 14.68*** 01111 - General Clerk I 13.98*** 01112 - General Clerk II 15.25*** 01113 - General Clerk III 17.12 01120 - Housing Referral Assistant 20.54 01141 - Messenger Courier 13.81*** 01191 - Order Clerk I 15.23*** 01192 - Order Clerk II 16.62 01261 - Personnel Assistant (Employment) I 16.00*** 01262 - Personnel Assistant (Employment) II 17.90 01263 - Personnel Assistant (Employment) III 19.96 01270 - Production Control Clerk 28.08 01290 - Rental Clerk 13.53*** 01300 - Scheduler, Maintenance 16.47 01311 - Secretary I 16.47 01312 - Secretary II 18.43 01313 - Secretary III 20.54 01320 - Service Order Dispatcher 17.00 01410 - Supply Technician 27.53 01420 - Survey Worker 16.18*** 01460 - Switchboard Operator/Receptionist 13.56*** 01531 - Travel Clerk I 17.33 01532 - Travel Clerk II 18.19 01533 - Travel Clerk III 19.02 01611 - Word Processor I 14.68*** 01612 - Word Processor II 16.47 01613 - Word Processor III 18.43 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 21.95 05010 - Automotive Electrician 19.84 05040 - Automotive Glass Installer 18.71 05070 - Automotive Worker 18.71 05110 - Mobile Equipment Servicer 16.46 05130 - Motor Equipment Metal Mechanic 20.97 05160 - Motor Equipment Metal Worker 18.71 05190 - Motor Vehicle Mechanic 20.97 05220 - Motor Vehicle Mechanic Helper 15.35*** 05250 - Motor Vehicle Upholstery Worker 17.59 05280 - Motor Vehicle Wrecker 18.71 05310 - Painter, Automotive 19.84 05340 - Radiator Repair Specialist 18.71 05370 - Tire Repairer 13.46*** 05400 - Transmission Repair Specialist 20.97 07000 - Food Preparation And Service Occupations 07010 - Baker 14.37*** 07041 - Cook I 13.38*** 07042 - Cook II 15.21*** 07070 - Dishwasher 10.67*** 07130 - Food Service Worker 11.52*** 07210 - Meat Cutter 15.17*** 07260 - Waiter/Waitress 10.28*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.78 09040 - Furniture Handler 14.27*** 09080 - Furniture Refinisher 20.78 09090 - Furniture Refinisher Helper 16.64 09110 - Furniture Repairer, Minor 18.76 09130 - Upholsterer 20.78 11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 14.00*** 11060 - Elevator Operator 14.00*** 11090 - Gardener 17.53 11122 - Housekeeping Aide 14.01*** 11150 - Janitor 14.01*** 11210 - Laborer, Grounds Maintenance 14.01*** 11240 - Maid or Houseman 11.34*** 11260 - Pruner 12.84*** 11270 - Tractor Operator 16.35 11330 - Trail Maintenance Worker 14.01*** 11360 - Window Cleaner 15.29*** 12000 - Health Occupations 12010 - Ambulance Driver 17.95 12011 - Breath Alcohol Technician 21.82 12012 - Certified Occupational Therapist Assistant 28.91 12015 - Certified Physical Therapist Assistant 28.17 12020 - Dental Assistant 18.81 12025 - Dental Hygienist 37.32 12030 - EKG Technician 23.95 12035 - Electroneurodiagnostic Technologist 23.95 12040 - Emergency Medical Technician 17.95 12071 - Licensed Practical Nurse I 19.51 12072 - Licensed Practical Nurse II 21.82 12073 - Licensed Practical Nurse III 24.32 12100 - Medical Assistant 17.05 12130 - Medical Laboratory Technician 21.52 12160 - Medical Record Clerk 18.34 12190 - Medical Record Technician 20.50 12195 - Medical Transcriptionist 18.38 12210 - Nuclear Medicine Technologist 47.95 12221 - Nursing Assistant I 11.64*** 12222 - Nursing Assistant II 13.08*** 12223 - Nursing Assistant III 14.27*** 12224 - Nursing Assistant IV 16.03*** 12235 - Optical Dispenser 16.90 12236 - Optical Technician 19.09 12250 - Pharmacy Technician 17.24 12280 - Phlebotomist 15.52*** 12305 - Radiologic Technologist 28.28 12311 - Registered Nurse I 24.91 12312 - Registered Nurse II 30.47 12313 - Registered Nurse II, Specialist 30.47 12314 - Registered Nurse III 36.87 12315 - Registered Nurse III, Anesthetist 36.87 12316 - Registered Nurse IV 44.19 12317 - Scheduler (Drug and Alcohol Testing) 27.03 12320 - Substance Abuse Treatment Counselor 23.38 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 19.38 13012 - Exhibits Specialist II 24.01 13013 - Exhibits Specialist III 29.36 13041 - Illustrator I 19.38 13042 - Illustrator II 24.01 13043 - Illustrator III 29.36 13047 - Librarian 26.59 13050 - Library Aide/Clerk 13.75*** 13054 - Library Information Technology Systems 24.01 Administrator 13058 - Library Technician 13.35*** 13061 - Media Specialist I 17.32 13062 - Media Specialist II 19.38 13063 - Media Specialist III 21.61

13071 - Photographer I 16.92 13072 - Photographer II 18.92 13073 - Photographer III 23.44 13074 - Photographer IV 28.68 13075 - Photographer V 33.50 13090 - Technical Order Library Clerk 17.42 13110 - Video Teleconference Technician 15.09*** 14000 - Information Technology Occupations 14041 - Computer Operator I 18.14 14042 - Computer Operator II 20.29 14043 - Computer Operator III 22.62 14044 - Computer Operator IV 25.14 14045 - Computer Operator V 26.60 14071 - Computer Programmer I (see 1) 23.66 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.14 14160 - Personal Computer Support Technician 25.14 14170 - System Support Specialist 29.88 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.95 15020 - Aircrew Training Devices Instructor (Rated) 36.23 15030 - Air Crew Training Devices Instructor (Pilot) 41.72 15050 - Computer Based Training Specialist / Instructor 29.95 15060 - Educational Technologist 32.81 15070 - Flight Instructor (Pilot) 41.72 15080 - Graphic Artist 21.09 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 41.72 15086 - Maintenance Test Pilot, Rotary Wing 41.72 15088 - Non-Maintenance Test/Co-Pilot 41.72 15090 - Technical Instructor 23.58 15095 - Technical Instructor/Course Developer 28.86 15110 - Test Proctor 19.05 15120 - Tutor 19.05 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.23*** 16030 - Counter Attendant 11.23*** 16040 - Dry Cleaner 14.15*** 16070 - Finisher, Flatwork, Machine 11.23*** 16090 - Presser, Hand 11.23*** 16110 - Presser, Machine, Drycleaning 11.23*** 16130 - Presser, Machine, Shirts 11.23*** 16160 - Presser, Machine, Wearing Apparel, Laundry 11.23*** 16190 - Sewing Machine Operator 15.02*** 16220 - Tailor 15.84*** 16250 - Washer, Machine 12.28*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.29 19040 - Tool And Die Maker 27.20 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.65 21030 - Material Coordinator 28.08 21040 - Material Expediter 28.08 21050 - Material Handling Laborer 14.69*** 21071 - Order Filler 13.63*** 21080 - Production Line Worker (Food Processing) 17.65 21110 - Shipping Packer 17.34 21130 - Shipping/Receiving Clerk 17.34

21140 - Store Worker I 14.72*** 21150 - Stock Clerk 19.23 21210 - Tools And Parts Attendant 17.65 21410 - Warehouse Specialist 17.65 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 26.85 23019 - Aircraft Logs and Records Technician 21.45 23021 - Aircraft Mechanic I 25.58 23022 - Aircraft Mechanic II 26.85 23023 - Aircraft Mechanic III 28.18 23040 - Aircraft Mechanic Helper 18.72 23050 - Aircraft, Painter 24.20 23060 - Aircraft Servicer 21.45 23070 - Aircraft Survival Flight Equipment Technician 24.20 23080 - Aircraft Worker 22.83 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.83 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 25.58

II

23110 - Appliance Mechanic 22.35 23120 - Bicycle Repairer 20.50 23125 - Cable Splicer 33.33 23130 - Carpenter, Maintenance 25.95 23140 - Carpet Layer 22.83 23160 - Electrician, Maintenance 31.66 23181 - Electronics Technician Maintenance I 24.21 23182 - Electronics Technician Maintenance II 25.66 23183 - Electronics Technician Maintenance III 27.13 23260 - Fabric Worker 21.90 23290 - Fire Alarm System Mechanic 22.34 23310 - Fire Extinguisher Repairer 20.50 23311 - Fuel Distribution System Mechanic 26.41 23312 - Fuel Distribution System Operator 21.26 23370 - General Maintenance Worker 21.88 23380 - Ground Support Equipment Mechanic 25.58 23381 - Ground Support Equipment Servicer 21.45 23382 - Ground Support Equipment Worker 22.83 23391 - Gunsmith I 20.50 23392 - Gunsmith II 23.31 23393 - Gunsmith III 26.11 23410 - Heating, Ventilation And Air-Conditioning 25.25 Mechanic 23411 - Heating, Ventilation And Air Contidioning 26.51 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 24.94 23440 - Heavy Equipment Operator 32.61 23460 - Instrument Mechanic 26.11 23465 - Laboratory/Shelter Mechanic 24.71 23470 - Laborer 14.69*** 23510 - Locksmith 24.71 23530 - Machinery Maintenance Mechanic 27.89 23550 - Machinist, Maintenance 23.75 23580 - Maintenance Trades Helper 14.20*** 23591 - Metrology Technician I 26.11 23592 - Metrology Technician II 27.42 23593 - Metrology Technician III 28.77 23640 - Millwright 28.14 23710 - Office Appliance Repairer 18.22 23760 - Painter, Maintenance 20.78 23790 - Pipefitter, Maintenance 33.02 23810 - Plumber, Maintenance 31.49 23820 - Pneudraulic Systems Mechanic 26.11

23850 - Rigger 26.11 23870 - Scale Mechanic 23.31 23890 - Sheet-Metal Worker, Maintenance 27.32 23910 - Small Engine Mechanic 22.83 23931 - Telecommunications Mechanic I 26.24 23932 - Telecommunications Mechanic II 27.52 23950 - Telephone Lineman 23.22 23960 - Welder, Combination, Maintenance 22.37 23965 - Well Driller 27.50 23970 - Woodcraft Worker 26.11 23980 - Woodworker 20.50 24000 - Personal Needs Occupations 24550 - Case Manager 14.59*** 24570 - Child Care Attendant 10.59*** 24580 - Child Care Center Clerk 13.21*** 24610 - Chore Aide 11.98*** 24620 - Family Readiness And Support Services 14.59*** Coordinator 24630 - Homemaker 14.59*** 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.58 25040 - Sewage Plant Operator 23.55 25070 - Stationary Engineer 25.58 25190 - Ventilation Equipment Tender 18.72 25210 - Water Treatment Plant Operator 23.55 27000 - Protective Service Occupations 27004 - Alarm Monitor 21.98 27007 - Baggage Inspector 14.04*** 27008 - Corrections Officer 21.37 27010 - Court Security Officer 24.43 27030 - Detection Dog Handler 15.71*** 27040 - Detention Officer 21.37 27070 - Firefighter 24.41 27101 - Guard I 14.04*** 27102 - Guard II 15.71*** 27131 - Police Officer I 27.36 27132 - Police Officer II 30.40 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.64*** 28042 - Carnival Equipment Repairer 14.62*** 28043 - Carnival Worker 10.71*** 28210 - Gate Attendant/Gate Tender 14.26*** 28310 - Lifeguard 11.74*** 28350 - Park Attendant (Aide) 15.94*** 28510 - Recreation Aide/Health Facility Attendant 11.63*** 28515 - Recreation Specialist 19.75 28630 - Sports Official 12.69*** 28690 - Swimming Pool Operator 16.81 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.19 29020 - Hatch Tender 27.19 29030 - Line Handler 27.19 29041 - Stevedore I 25.66 29042 - Stevedore II 28.74 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 41.26 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 28.46 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 31.33 30021 - Archeological Technician I 22.49 30022 - Archeological Technician II 25.15 30023 - Archeological Technician III 31.16 30030 - Cartographic Technician 31.16

30040 - Civil Engineering Technician 27.31 30051 - Cryogenic Technician I 34.51 30052 - Cryogenic Technician II 38.12 30061 - Drafter/CAD Operator I 22.49 30062 - Drafter/CAD Operator II 25.15 30063 - Drafter/CAD Operator III 28.04 30064 - Drafter/CAD Operator IV 34.51 30081 - Engineering Technician I 15.52*** 30082 - Engineering Technician II 17.41 30083 - Engineering Technician III 19.48 30084 - Engineering Technician IV 24.14 30085 - Engineering Technician V 29.66 30086 - Engineering Technician VI 35.90 30090 - Environmental Technician 28.84 30095 - Evidence Control Specialist 31.16 30210 - Laboratory Technician 25.93 30221 - Latent Fingerprint Technician I 34.51 30222 - Latent Fingerprint Technician II 38.12 30240 - Mathematical Technician 28.72 30361 - Paralegal/Legal Assistant I 21.09 30362 - Paralegal/Legal Assistant II 26.13 30363 - Paralegal/Legal Assistant III 31.97 30364 - Paralegal/Legal Assistant IV 38.67 30375 - Petroleum Supply Specialist 38.12 30390 - Photo-Optics Technician 31.16 30395 - Radiation Control Technician 38.12 30461 - Technical Writer I 31.16 30462 - Technical Writer II 38.12 30463 - Technical Writer III 46.13 30491 - Unexploded Ordnance (UXO) Technician I 26.22 30492 - Unexploded Ordnance (UXO) Technician II 31.73 30493 - Unexploded Ordnance (UXO) Technician III 38.03 30494 - Unexploded (UXO) Safety Escort 26.22 30495 - Unexploded (UXO) Sweep Personnel 26.22 30501 - Weather Forecaster I 34.51 30502 - Weather Forecaster II 41.99 30620 - Weather Observer, Combined Upper Air Or (see 2) 28.04 Surface Programs 30621 - Weather Observer, Senior (see 2) 31.16 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 31.73 31020 - Bus Aide 17.50 31030 - Bus Driver 23.39 31043 - Driver Courier 14.41*** 31260 - Parking and Lot Attendant 12.18*** 31290 - Shuttle Bus Driver 14.64*** 31310 - Taxi Driver 13.33*** 31361 - Truckdriver, Light 15.44*** 31362 - Truckdriver, Medium 16.50 31363 - Truckdriver, Heavy 22.42 31364 - Truckdriver, Tractor-Trailer 22.42 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.47*** 99030 - Cashier 10.81*** 99050 - Desk Clerk 11.26*** 99095 - Embalmer 25.60 99130 - Flight Follower 26.22 99251 - Laboratory Animal Caretaker I 14.12*** 99252 - Laboratory Animal Caretaker II 15.14*** 99260 - Marketing Analyst 27.58 99310 - Mortician 25.60 99410 - Pest Controller 21.54

99510 - Photofinishing Worker 13.78*** 99710 - Recycling Laborer 20.75 99711 - Recycling Specialist 24.21 99730 - Refuse Collector 19.01 99810 - Sales Clerk 11.66*** 99820 - School Crossing Guard 16.27 99830 - Survey Party Chief 24.60 99831 - Surveying Aide 14.62*** 99832 - Surveying Technician 22.36 99840 - Vending Machine Attendant 13.08*** 99841 - Vending Machine Repairer 15.70*** 99842 - Vending Machine Repairer Helper 13.08***

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($16.20 per hour) or 13658 ($12.15 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.80 per hour, up to 40 hours per week, or $192.00 per week or $832.00 per month

HEALTH & WELFARE EO 13706: $4.41 per hour, up to 40 hours per week, or $176.40 per week, or $764.40 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families.