A2. Purchase Description_Enclosed Cargo Trailer.docx

DESCRIPTION OF REQUIREMENT

The Washington National Guard Recruiting and Retention Battalion (RRB) has a requirement to purchase six (6) enclosed cargo trailer. Interested vendors must submit offers meeting the description of each item listed below, including product information (brand, part number, warranty information, etc.).

CLIN 0001 – Enclosed Cargo Trailer QTY: 6 (ea.)

Salient Characteristics:

· Model/Type: Enclosed V-Nose Tag Trailer, Tandem Axle.

· Dimensions:

· Approximate Overall Dimensions: 8.5' Wide x 16' Long.

· Approximate Interior Height: 7' 0" (84 inches).

· Rear Opening Width: Approximately 94 inches.

· GVWR & Axles:

· Gross Vehicle Weight Rating (GVWR): Minimum 9,900 lbs.

· Axles: Two (2) 5,200 lb electric brake spring axles.

· Frame & Structure:

· Frame: Steel frame with a dust-resistant design.

· Main Rails: 2" x 6" tube steel.

· Tongue: 12" extended A-frame tongue with center drawbar.

· Coupler: 2-5/16" coupler rated for a minimum of 14,000 lbs.

· Tongue Jack: 2,000 lb top-wind tongue jack with sand pad.

· Crossmembers: 16" on-center floor crossmembers.

· Vertical Posts: 16" on-center wall posts.

· Roof Bows: 16" on-center tube steel roof bows.

· Roof: One-piece aluminum roof.

· Coating: Protective coating (e.g., ArmorTech) on A-frame and rear-end rail.

· Doors & Ramps:

· Rear Door: Minimum 5,000 lb capacity rear ramp door with ramp extension and spoiler.

· Side Door: Minimum 36" wide x 78" high side door with recessed step.

· Exterior:

· Exterior Panels: Black, bonded (screwless) aluminum composite panels.

· Trim: Black-out "Phantom" style exterior trim package.

· Fenders: Smooth aluminum fenderettes.

· Stoneguard: Minimum 24" ATP (Aluminum Tread Plate) stoneguard on front.

· Interior:

· Flooring: 3/4" black textured polybead flooring on main floor and ramp.

· Walls: 9mm white vinyl sidewall liner.

· Ceiling: White vinyl ceiling liner.

· Cargo Control:

· E-Track: Recessed horizontal E-Track system installed on interior walls (approx. 32 linear feet).

· D-Rings: Minimum of one (1) 5,000 lb rated, welded D-Ring tie-down.

· Electrical System (120V):

· Service: 30A electrical service panel with a 25' power cord and motorbase plug.

· Receptacles: Minimum two (2) 120V 15A interior duplex receptacles.

· Switches: One (1) 120V interior wall switch.

· Lighting & 12V System:

· Exterior DOT Lights: Full LED package including slim line clear-lens tail lights, clear-lens amber and red clearance lights, and rear ID bar. License plate holder with separate light.

· Exterior Scene Lights: Three (3) total 12V LED 24" (approx. 9,000 lumen) exterior scene lights, with one (1) mounted at the rear spoiler and two (2) mounted on the sides.

· Interior Lights: Two (2) 12V LED 36" slim line interior lights controlled by a surface-mount switch.

· Power Supply: Onboard marine battery with an exterior-mounted battery box.

· Safety: Breakaway kit assembly with charger and G4 safety chains.

· Additional Features:

· Awning: Minimum 14' black power awning with a black metal shield/cover.

· Venting: One 14"x14" non-powered roof vent and sidewall flow-thru vents.

· Wheels/Tires: ST225/75R15D radial tires on black aluminum wheels with center caps.

Preferred Characteristics:

· Heavy-duty flooring crossmembers spaced 12" on center for increased payload support.

· Matching spare radial tire mounted securely on the interior wall.

· A minimum 3-year bumper-to-trailer warranty and 5-year structural warranty.