A14_-_RFI_for_SAM_1.pdf

Custom Research Vessel, Trailer, and Delivery Yellowstone National Park – National Park Service (NPS)

Prepared By: Rebecca Hayes Date: June 09, 2026

EMAIL Response with the title, RFI - Custom Research Vessel, Trailer, and Delivery to [rebecca_hayes@ios.doi.gov]Rebecca_Hayes@ios.doi.gov NLT: June 19, 2026; 5 PM EST.

1.0 Project Description / Summary

The National Park Service (NPS), Yellowstone National Park, is conducting market research to identify qualified sources capable of furnishing a new, fully operational 34’ aluminum welded research vessel (WorkSkiff Commander Series or equal), a fully compatible heavy-duty boat trailer, and delivery of the complete package to Yellowstone National Park no later than 12 months from date of award. This RFI is issued solely for planning and information-gathering purposes and does not constitute a solicitation.

NOTE: Please identify if your company has the 2025 or newer vessel in stock/on lot OR can be ordered that meets the requirements of “new” listed below with an estimated price within 12 months from date of award.

• Zero use (supported by zero engine hours),

• All OEM components,

• Has never been previously titled, registered, or owned and

• Has not been placed into service.

2.0 General Requirements

The contractor shall provide one (1) new custom research work boat, commercial-grade, mono-hull aluminum, approximately 34 feet LOA (±2 ft), with heavy-duty marine aluminum construction and a model year of 2025 or newer, including all propulsion, systems, and outfitting required for safe and effective research operations on Yellowstone Lake.

Key minimum vessel attributes include:

• Aluminum welded hull (5086-H116 / 5052-H32)

• Twin 250 HP 4-stroke outboards

• 250-gallon fuel capacity

• Enclosed work cabin and deckhouse

• Required outfitting: gill-net lifter, hydraulic power pack, navigation components, DC electrical system, bilge system, safety equipment, and NPS-provided radio and decals

A detailed specification sheet (above) represents the Government’s current minimum performance expectations and may be refined based on industry feedback.

3.0 Design and Construction Standards

All construction, welding, fabrication, and outfitting shall meet or exceed applicable ABYC and ABS standards for commercial aluminum vessels, including structural, electrical, fuel, and stability requirements.

4.0 Powerplant / Propulsion

The vessel shall be equipped with twin 250 HP Honda iST (or equal) 4-stroke outboard engines, hydraulic steering with power assist, and OEM-compliant rigging to maintain full manufacturer warranty. A Sleipner (or equal) bow thruster is required.

5.0 Warranty

Minimum warranty requirements:

• 10-year structural hull warranty

• 1-year workmanship warranty on all installed components

• Contractor shall provide on-water operational training (minimum 2 hours for up to 12 NPS employees)

6.0 Trailer Requirements

The Contractor shall provide one (1) fully welded, one-piece, hot-dip galvanized boat trailer, equal to or exceeding the performance of a Tuff Trailer brand commercial trailer.

Minimum specifications include:

a. Triple-axle design with aluminum diamond-plate fenders

b. Goose-neck configuration

c. Bearing Buddy system on all axles

d. 17,200 lb. galvanized load capacity

e. Bow V-block

f. Spare tire and carrier

g. DOT-approved sealed marine-grade LED lighting package

h. Electric-over-hydraulic braking system

i. Disc brakes with aluminum calipers, stainless pistons, stainless bushings, and self-adjusting surge brake actuator

j. Synthetic lines and brass fittings; hoses/fittings tested per SAE/DOT standards

k. Surge brakes on all axles

l. Zinc-plated fasteners

m. Galvanized steel channel main frame

n. 3500 lb. manual two-speed winch with strap

o. Adjustable pivoting bunks with winch post

p. Load Range E tires with a mounted spare

q. 7-blade RV-style electrical plug

7.0 Delivery Location Requirements

All transportation, logistics, and delivery shall be provided by the contractor.

Delivery Address:

Yellowstone National Park Mammoth Supply Center 22 Stable Street Mammoth, WY 82190

8.0 Performance Period / Schedule Requirements

Due to the short operational season on Yellowstone Lake, delivery of the completed vessel and trailer must occur no later than 12 months from the date of award. This includes all factory sea trials, inspections, and readiness for service.

Industry Feedback Requested NLT June 19 2026; 5 PM EST.

NPS requests the following from interested vendors:

1. Capability Statement confirming the ability to meet or exceed the requirements, limit 1 page, exclude cover.

2. Technical comments on the provided specifications, including recommended improvements or alternatives

3. Estimated production and/or delivery timeline

4. Estimate cost for vessel, trailer, training, and delivery

5. Company information including GSA Schedule, SAM UEI, and business size under

NAICS 336612

This RFI is for planning purposes only. No award will be made based on this notice.