A06_Specifications_Four_Commercial_Grade_Lawn_Mowers.docx

BLM is in need of four new durable commercial grade mowers for mowing rough uneven terrain. Two of which need to be riding zero turn mowers and two need to be stand on mowers. We have numerous steep and long slopes that require higher than average horsepower in order to navigate these slopes safely. These mowers will be used in campground and day use areas, therefore we need heavy duty durability. These mowers will be used for long hours at least several times a week from April to October so we need to have commercial grade parts that will hold up to the frequent use.

2 riding zero turn 1 of these mowers must have a 61” cutting width or larger 1 of these mowers must have a 72” cutting width minimum Large fuel capacity= 9 gallon minimum Roll over protection Heavy-duty steel deck made of 7-gauge steel minimum Heavy-duty fully welded steel frame 35 HP engine minimum (needed for hill mowing) Commercial grade heavy-duty blade drive spindles Hydrostatic transmission Split steel pulleys 12cc hydraulic pumps equipped with cooling fans Hydraulic drive system Clutch/brake needs 250 pounds torque High quality bearings-tapered roller bearings in front caster wheels Adjustable cutting heights with at least 1.5” to 4” Gasoline engine An example of a mower that will meet these specs is SCAG STTII-61V-40BV-EFI but this is not brand name only

2 Stand on mowers 61” cutting deck minimum Large fuel capacity= 12 gallon minimum Heavy-duty steel deck made of 7-gauge steel minimum Heavy-duty fully welded steel frame 35 HP engine minimum (needed for hill mowing) Commercial grade heavy-duty blade drive spindles Hydrostatic transmission Spilt steel pulleys 12cc hydraulic pumps equipped with cooling fans Hydraulic drive system High quality bearings-tapered roller bearings in front caster wheels Adjustable cutting heights with at least 1.5” to 4” Gasoline engine An example of a mower that meets these specs is SCAG V-RIDE II SVRII-61V-40BV-EFI but this is not brand name only