A06_Specifications.pdf

SPECIFICATIONS ON

Amphibious Track Vehicle with Cutter and Trailer

Delivery to Fergus Falls Wetland Management District (WMD) , 18965 County Highway 82, Fergus Falls, MN 56537 and Seney National Wildlife Refuge, 1674 Refuge Entrance Road, Seney, MI 49883

BODY:

• Approximate dimensions: 15’6” - 17’ long x 8’- 9’ wide x 8’ - 8’8” high

• All Welded 1/8” aluminum body with 3/16” high strength pontoon bottoms

• 6900 - 8000 LB (approx.)

• Minimum 1300 lb. floating load capacity

• Tilt out windshield

• Brush guard on front of machine

• Walking deck full width of the tracks with slip resistant coating on decks (Line X or comparable)

• Minimum 30” ground clearance

• All stainless-steel fasteners throughout machine

• Easily accessible and serviceable 25-30 gallon secured aluminum fuel tank mounted in rear bed area

• Rear mounted hydraulic three-point hitch with quick attach system

• Overhead cargo rack capable of supporting 100 lb. of gear

• Catwalk over winch

• (2) plugs installed in the floorboard of the driver and passenger floorboard for drain purpose

• (1) bottom/floor drain plug in the back cargo area of the machine

• (2) doors installed with removable screens

• (1) back up camera installed

CAB:

• Seating for two people

• Winch control or remote plug locate in cab

• Actuator for pump (fire suppression package) located in cab

• Drive controls operational from either seat

• Minimum required gauges:

• Tachometer

• Engine oil pressure

• Engine temperature

• Hydraulic temperature

• Voltmeter

• Hour meter

• Water level indicator for fire suppression package

DRIVE SYSTEM:

• 70 - 115 HP diesel engine

• TIER 4 FINAL CERTIFIED MEETING ALL

REQUIREMENTS SET FORTH BY THE EPA FOR

2019 OFF ROAD DIESEL ENGINES

• Twin Hydrostatic Transmission

• Oil bath lubricated low speed/high torque final drives that requires no external greasing of bearings

• Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

• Side by side radiator/hydraulic oil cooler

SPEED:

• 6-8 mph on land, 1 mph in water

TRACK SYSTEM:

• 28” wide aluminum cleats

• Two low stretch rubber belts per track

• Bolt on bogey wheel design for easy replacement

• Four drive sprockets per track (4" pitch)

• Approximately 1 PSI ground pressure

• Bogey axle assemblies must include internal oil bath, lubricated and sealed requiring no external greasing.

• All corrosion-proof stainless-steel track bolts and hardware for saltwater usage

• No external grease points anywhere on rear drive or bogey system

• Front idler shafts and rear drive shafts to be stainless steel. Bearing housings anodized aluminum.

ELECTRICAL SYSTEM:

• 12 volt battery secured in enclosed compartment

• Multifunction engine display

• 2 LED front lights/2 LED rear lights

• 12 volt auxiliary receptacle in cab and rear bed area

• Battery shut-off switch

• Prewired auxiliary switch located on control panel in cab, used for emergency lighting

WINCH and JACK:

• Front mounted winch rated to pull a minimum of the total maximum rated weight of machine

• Minimum 75’ of wire rope on winch

• Front porthole window allowing operator to see winch cable while winching

• Weight rated jack to lift the machine

FIRE SUPPRESSION SYSTEM

• (2) – 55-gallon aluminum water tank built into each pontoon

• Water level gauge for tanks (Mounted in cab)

• Hydraulic motor driven, self-priming centrifugal water pump

• 15’ of 1 ½” suction hose for quick fill from ditch or lake

• 12’ of 1 ½” discharge hose

• 25’ of 1 ½” discharge hose

• Fog & stream brass spray nozzle

• Camlock hose connections and caps for pump

LOW FLOW AND HIGH FLOW AUXILIARY

HYDRAULIC CIRCUITS:

• Low flow auxiliary hydraulic circuit 3-8gpm@3000psi and 2000 rpm

• High flow auxiliary hydraulic circuit 30 GPM max @

3500 psi/2600 rpm

SPECIFICATIONS ON

Amphibious Track Vehicle with Cutter and Trailer

Delivery to Fergus Falls Wetland Management District (WMD) , 18965 County Highway 82, Fergus Falls, MN 56537 and Seney National Wildlife Refuge, 1674 Refuge Entrance Road, Seney, MI 49883

ROTARY CUTTER SPECIFICATIONS

• Cutting Width: 75 - 80”

• Cutting Capacity: 2" diameter material

• Cutting Heads: Two (2) 38” diameter

• Blades: Two (2) per cutting head; 1/2” x 3” x 11

1/2” heat treated steel

• Spindle Speed: Approx. 1400rpm

• Blade Tip Speed: Approx. 17,000 fpm

• Drive Motors: Two (2), 1 per cutting head, rated @ 50 hp max power input

• Spindles: Two (2) extra heavy duty roller bearings;

Spindle Seals well protected from wrap up, grease lubricated

• Deck: Minimum 1/4” thick 5086 Aluminum, with 3/8” thick 6061-T6 Aluminum pivot mounts and side slider frame

• Heavy duty height adjustable skis for supporting cutter deck. Replaceable wear pads on ski bottoms

• Weight: approx.700 pounds

• Tilt & Lift System: Front and rear cutter 3-point hitch, hydraulic with mechanical controls

• Attachment: Quick connect hydraulic hoses, quick-attach pull frame

• Safety Features:

• Auto Shutdown when cutter head is tilted up

• Foot switch at operator seat in cab must be depressed to power cutter head

• Push/pull dash mounted switch to engage cutter.

• Built in hydraulic blade brake that stops blades from free spinning after shutdown

MACHINE/ENGINE WARRANTY:

• Factory Direct

• 1 Year/1000 hr. bumper to bumper whichever comes first

• Engine warranty 3yr/2000 hr. 100% parts and labor

TRADE-IN:

• Marsh Master 333197 MM-2A-FF with trailer

• Marsh Master 333198 MM-2A-FF with trailer

TRAILER SPECIFICATIONS:

• Tilt deck trailer with raised center to prevent slide off while loading and unloading.

• Trailer mounted ladder, for safe access to machine while loaded on trailer

• Matching spare tire and rim, mounted on trailer

• Electric brakes

• Electric brake actuator with breakaway

• 2 5/16” forged adjustable coupler

• Minimum GVWR of 13,000 lbs.

• Tongue jack sufficiently strong to allow trailer to be disconnected with fully loaded machine left on it.

• Gravity tilt with hydraulic cylinder dampener

• Four (4) D-ring tie downs

• Two galvanized safety chains per DOT specs

• Light package must include LED lighting system

• Reflector package with (4) 2” red and (2) 2” amber and reflective tape side and rear per DOT standards

• Round 7 blade RV trailer wire connector

• Four tie down straps weight rated for the machine to secure machine to the trailer

Year: Model:

FWS Property #: FWS Equipment #: FWS Asset:

VIN:

Known Defects:

Additional Information:

Make:

Hours (machine may be in use):

StationName:

Location:

US F.W.S Region 3 Equipment Trade In Form

Station Contact:

Contact Phone Number:

Contact Email:

Regional Contact: Clint DeMenge clint_demenge@fws.gov 218-821-5608

VIN:

Known Defects:

Additional Information:

Make:

Hours (machine may be in use):

StationName:

Location:

US F.W.S Region 3 Equipment Trade In Form

Station Contact:

Contact Phone Number:

Contact

VIN:

Known Defects:

Additional Information:

Make:

Hours (machine may be in use):

StationName:

Location:

US F.W.S Region 3 Equipment Trade In Form

Station Contact:

Contact Phone Number:

Contact

VIN:

Known Defects:

Additional Information:

Make:

Hours (machine may be in use):

StationName:

Location:

US F.W.S Region 3 Equipment Trade In Form

Station Contact:

Contact Phone Number:

Contact