A06_SPECIFICATIONS.pdf

United States Department of the Interior

FWS National Conservation Training Center

698 Conservation Way

Shepherdstown, WV 25443

SPECIFICATIONS

CONTAINED TRASH COMPACTOR 265XP-35

Charge Box

Wastequip rating - 2.00 cubic yards

Wastec rating - 1.34 cubic yards

Clear top opening - 40” Length x 60” Width

Ram Face plate - 1/2” steel with 5/8” stiffener plates

Base plate - 1/2” flat bar with 3” structural channel

Top plate - 1/4” steel plate with 5” x 3-1/2” angle support

Side plates - Framed with 3” structural channel

Ram height - 26.00”

Compactor Head

Floor - 1/2” with two 6” formed channel supports

Sides - 1/4” side plates with 6” x 3” formed steel stiffener

Top rail - 6” x 3” formed steel stiffener

Breaker bar - 6” x 6” x 3/4” angle steel

Sump - 12” height

Electrical

Electric motor - 5 hp TEFC (Totally Enclosed Fan Cooled)

Solar: 50 watt PV

Battery: 12V sealed lead acid

Voltage - 208/230/460, 3 phase, 60 HZ (optional 575V)

Power box - Guardian NEMA 4 rated, UL listed

Operator control station - NEMA 4 rated 24 volt

Automated cycle operation - turn key switch-ram extends, retracts and stops automatically

Hydraulic Specifications Pump - 8.3 / 4.3 gpm HiLo

Ram penetration - 6”

Cycle time - 28 to 49 seconds

Hydraulic cylinder - (2)

Cylinder bore - 4” Cylinder rod - 2.5”

Hydraulic oil tank - 20 gallon reservoir

Power unit location - remote

Hydraulic Performance

Ram face pressure

- Normal - 39,800 lbs

- Maximum - 49,500 lbs

Ram psi

- Normal - 25.00 psi

- Maximum - 31.73 psi

Operating pressure

- Normal - 1,850 psi

- Maximum - 2,300 psi

Container 7 gauge floor with 3” channel crossmember

6” x 2” x 1/4” tube rails, 36 ½” I.D. between rails

Solid steel bullnose and hook at both ends

4” diameter rollers, 4 1/2” long

Length, width and height - see chart above