A06_ANT150F2_Spec_Sheet.pdf
PDF 183 KB Posted
- Attached to
- KIMBERLY MTN SITE MOVE Federal contract opportunity
- Solicitation number
- 140L1225Q0065
About this file
This document is a product specification sheet for the Telewave.io ANT150F2 Fiberglass Radome Antenna, designed for the 148-174 MHz frequency range. The omnidirectional antenna offers rugged construction with brass and copper elements, providing protection against environmental factors like corrosive gases, ultraviolet radiation, icing, and wind-blown abrasives. Key specifications include a 0 dBd gain, 500-watt power rating, 50-ohm impedance, and a temperature operating range from -58 to +140°F, with multiple mounting variations available (bottom or top mount, N-F or 7/16 DIN-F connectors).
The specification sheet includes detailed mounting instructions using the ANTC485 Clamp Kit, which contains clamp plates, U-bolts, nuts, and lock washers. Critical safety warnings are provided, emphasizing proper installation away from power lines, using safety devices during climbing, and ensuring proper tower grounding. The antenna weighs 12 lbs, has a wind rating of 200/150 MPH, and features a Cool Blue™ radome with IP24-equivalent intrusion and moisture protection. The document provides comprehensive technical details, beam pattern diagrams, and installation guidance for professional antenna deployment.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| A06_Northstar_Safety_Data_Sheet.pdf | ||
| A06_NotherStar_Application_Manual.pdf | ||
| B03_Attachment_3_Wage_Det_2015-5679_Rev_28_2025_0708_Lassen.pdf | ||
| B03_Attachment_2_Wage_Det_2015-5601_Rev_26_2025_0708_White_Pine.pdf | ||
| Sol_140L1225Q0065.pdf | ||
| B08_Attachment_1_Performance_Work_Statement.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Copyright © Telewave.io. Page 1 of 2 Specifications subject to change without notice www.telewave.com 1-408-929-4400 241031 sales@telewave.com support@telewave.com
ANT150F2
FIBERGLASS RADOME ANTENNA
Rtn Loss > 14.0 dB
Vertical Beam Pattern
Horizontal Beam Pattern
The Telewave.io fiberglass radome antennas are rugged omnidirectional antennas suited for most environments. The radome provides protection from corrosive gases, ultraviolet radiation, icing, acid rain, and wind-blown abrasives. Intrusion and moisture protection is equivalent to an IP24 rating. The default radome color is Cool BlueTM.
These antennas are constructed with brass and copper elements that are soldered together, producing a DC path to ground, and preventing internally produced intermodulation products.
The antenna kit includes a dual clamp set for mounting the antenna to a 1.5” to 3.5” O.D. support mast (Not Included.) Please contact your tower vendor or local structural engineering firm for assistance with mounting hardware requirements and configuration.
Variations Part Number Connector Jumper Default Clamp Mounting ANT150F2 N-F None ANTC485 Clamps Bottom (Normal) ANT150F2-I N-F None ANTC485 Clamps Top (Inverted) ANT150F2-DIN 7/16 DIN-F None ANTC485 Clamps Bottom (Normal) ANT150F2-IDIN 7/16 DIN-F None ANTC485 Clamps Top (Inverted)
SPECIFICATIONS
Frequency (continuous) 148-174 MHz Radome Dimensions Inches (H” x D’”) 48.75 x 2.5
(123.8 x 6.4)
Gain 0 dBd / 2.15 dBi Ferrule Dimension Inches (H” x D”) 11.5 x 2.75
(29.2 x 7)
Power rating (typ.) 500 watts Tower weight (antenna + clamps) 12 lb.
Impedance 50 ohms Shipping weight 16 lb.
VSWR 1.5:1 or less Wind rating / with 0.5” ice 200 / 150 MPH
Pattern Omnidirectional Maximum exposed area 1.3 ft.²
Beamwidth 80° vertical/ 360° horizontal Lateral thrust at 100 MPH 50 lb.
Termination Recessed N Female 7-16 DIN-F opt.
Bending moment at top clamp 67 ft. lb.
(100 MPH, 40 PSF flat plate equiv.)
Temperature Range
(Operating or Storage)
-58 to +140 °F -50 to +60 °C
148 - 174 MHz http://www.telewave.com/ mailto:sales@telewave.com mailto:support@telewave.com
Copyright © Telewave.io. Page 2 of 2 Specifications subject to change without notice www.telewave.com 1-408-929-4400 241031 sales@telewave.com support@telewave.com
ANTC485
Clamp Kit for Radome Antennas: F0 & F2
ANTC485 Clamp Kit
(2) Clamp Plates
(2) 3/8”-16 Stainless U-Bolts
(4) Hex Nuts
(4) Lock Washers
(1) Tube of Anti-Seize Compound
ANTC485 Typical Installation
WARNING
For your safety: do not install any antenna near power lines, carefully follow all installation instructions, and use safety devices when climbing. Ensure that the tower structure is properly and safely grounded.
If the antenna falls toward or contacts any overhead wires, IMMEDIATELY LET GO and stay away. Contact the utility company for assistance.
Consult a qualified structural engineer to verify that the tower and all mounting hardware are sufficient to support the antenna and RF cables.
Antenna mounting clamps must be properly installed and spaced to prevent antenna rotation from wind loading. Every installation is unique.
MOUNTING INSTRUCTIONS
1. Apply anti-seize compound to the threaded rod ends. Insert rods through dual clamps with hex nuts and lock washers in the middle of the clamps.
Mount both clamps to the support structure with the two single clamp plates, hex nuts, and lock washers. Arrange clamps so that 1”-2” of the ferrule is exposed above and below the clamps. Be sure to allow sufficient thread length on the antenna side of the clamps.
2. Attach the antenna clamp plate to the upper clamp set only, allowing maximum plate movement on the rods. Feed the ferrule down through the clamp until aligned with the upper attachment point. Partially tighten the hex nuts and straighten the antenna until the antenna is vertical.
3. Attach and secure the lower antenna clamp with the supplied hex nuts and lock washers and tighten both clamps until the lock washers are flat. Then perform an additional half turn on each nut.
4. Connect RF feed cable terminated with Type-N or 7-16 DIN as required to antenna input connector. Secure all cables with UV-Resistant cable ties.
5. Seal the input connector with waterproof tape or other sealing material.
Connector sealing instructions can be found at www.telewave.com.
mailto:sales@telewave.com mailto:support@telewave.com
File details come from the government source that posted it. Updated .