Land Mobile Crane Service SoW.docx
DOCX document 26 KB Posted
- Attached to
- FY 26 Mobile Crane & Operator Services Federal contract opportunity
- Solicitation number
- A058730
About this file
This is a Performance Work Statement (PWS) for land mobile crane and operator services to support vessel cargo off-loading operations at Joint Base Charleston - Naval Weapons Station in Goose Creek, South Carolina, with performance scheduled for February 2026. The contractor must provide all labor, equipment, transportation, management, and supervision including a land mobile crane, NCCCO-certified or equivalent crane operator, and riggers needed for crane setup only. The crane must meet specific technical specifications: 250-ton lifting capability, ability to lift cargo to a minimum 5-foot clearance above a 20-foot tall, 54-foot wide, 341-foot long vessel, maximum lift distance of 70 feet, and maximum cargo weight of 52,000 pounds. The crane must have current inspection certification and comply with OSHA 1926 Subpart CC, OSHA 1926.1412(f), and ASME B30.5 standards, with slings and lifting devices adhering to ASME B30.9 and ASME B30.20.
The statement specifies that upon 24-hour notification, the contractor must deliver and pre-position the crane at the designated location for a minimum of 7 calendar days, with an additional 24-hour notification triggering the provision of crane operator and personnel for off-loading operations lasting approximately 12 hours, excluding travel time. The government will furnish a 20-foot Tandemloc Autoloc Spreader, provide spotters during off-load operations, and furnish additional riggers. All contractor personnel requiring access to Joint Base Charleston must complete applicable background checks prior to receiving a contractor pass or badge. This PWS corresponds to a Pre-Solicitation/Sources Sought announcement (Solicitation Number A058730) issued by the Department of the Air Force Air Mobility Command for market research purposes.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
LAND MOBILE CRANE & OPERATOR
Joint Base Charleston – Naval Weapon Station, SC February 2026
Performance Work Statement (PWS): The Contractor shall provide all labor, equipment, transportation, management, and supervision required to provide a land mobile crane, operator, and rigger(s) to assist off-loading vessel cargo at Joint Base Charleston – Naval Weapon Station, Goose Creek SC.
The Crane Operator shall be National Commission for the Certification of Crane Operators (NCCCO) certified or equivalent for the size and type crane to be operated.
The Contractor shall provide a land mobile crane with current inspection and/or in adherence to OSHA 1926 subpart CC, OSHA 1926.1412(f) and ASME B30.5. Slings and/or below the hook lifting devices if utilized shall adhere to ASME B30.9 and/or ASME B30.20 and shall be inclusive of the crane, counterweights, operator, rigger(s) needed for crane set up only. Government will furnish rigger(s). All required equipment shall meet the following requirements:
Lifting Capability – 250 tons Maximum Diagonal Lifting Lug Measurement - 10.70 meters (35’2”) Highest Beginning Lifting Point – +34’ Lowest Beginning Lifting Point – -20’ Vessel Height – 6.04 meters (20’) Vessel Width – 16.50 meters (54’) Vessel Length – 103.90 meters (341’) Maximum Lift Distance - 70’ Maximum Cargo Weight – 52k
The Contractor provided crane must be capable of lifting vessel cargo to a minimum clearance height of ___5’____ above the vessel.
Upon 24-hour notification to the Contractor, the Government will require delivery and pre-positioning of the crane and all necessary equipment at the designated location. The crane shall remain at the designated location for a minimum of 7 calendar days. Upon a separate 24-hour notification, the Contractor will provide the crane operator and personnel to perform off-loading requirements. Off-loading performance is expected to be 12 hours in duration, not to include travel to the designated location.
Contractor personnel requiring access to JB CHS shall submit to all applicable background checks prior to receiving a contractor’s pass/badge to accomplish work or enter the installation.
The government will provide a 20’ Tandemloc Autoloc Spreader. The government will also perform spotters during off-load operations.
File details come from the government source that posted it. Updated .