RFI J-1 Performance Work Statement (PWS) MOKKITS Sustainment_Recompete.docx

PERFORMANCE WORK STATEMENT FOR

MISAWA/OSAN/KUNSAN/KADENA INSTRUMENTATION TRAINING SYSTEM (MOKKITS) SUSTAINMENT

xx xxxx 2026

SECTION I – OVERVIEW

1.1. MISSION/PURPOSE

The MOKKITS/pods provide U.S. aircrews the capability to obtain unique and highly specialized tactical fighter proficiencies by simulating realistic and recording live real-time air combat maneuvers and scenarios. Recordings made in-flight provide data for assessment of air-to-air, air- to-ground, and surface-to-air weapons engagements and flight maneuvers between the United States Air Force (USAF) and Joint/USINDOPACOM Allies. The MOKKITS/pods record the pilots' real time response to the decisions made in various combat flight scenarios. The recorded data includes the aircraft's mission parameters, classified weapons data, specific aircraft locations (known as time-space-position-information (TSPI) and other high-level flight information. This recorded information is used to develop and deliver post-flight mission debriefings used to assess and improve aircrew/pilots' overall air combat performance.

1.2. BACKGROUND

The U.S. Air Force implemented the use of MOKKITS/pods across multiple U.S. Air Force bases located in Japan and Korea, after the successful implementation and performance of the first generation of pods/KITS at Kadena AB. The implementation of KITS/pods, subsequently led to a second follow-on noncompetitive contract with Cubic Corporation. Cubic developed and manufactured a second generation of the pod. The second-generation pod was intended to be an interim air combat training solution for the USINDOPACOM AOR, until the U.S. Air Force developed an Air Force enterprise-wide solution. However, the next generation combat training solution has not been provided. The interim development of the second-generation pod subsequently became the permanent data configuration (technical data) and equipment used today. Generation two of the pod is referred to as the Misawa/Osan/Kunsan/Kadena Instrumentation Training System (MOKKITS).

U.S. Allies in USINDOPACOM AOR adopted the USAF's air combat training methodology and equipment (pod), after successful performance of the pod/MOKKITS. The U.S. Allies subsequently purchased their current pod/MOKKITS inventory directly from Cubic. Consequently, all of the U.S. Allies sold-off and/or made the frequency used by other systems unavailable for use by other air combat training systems. As a result, MOKKITS is the only feasible solution available to the USAF and U.S. Allies, to perform live air combat operations/training exercises within the INDOPACOM AOR.

1.3. SCOPE

This requirement provides non-development, non-commercial highly specialized sustainment/logistics services and highly specialized supplies (incidental) to ensure satisfactory mission and operational performance of the MOKKITS system. MOKKITS sustainment is responsible for two major components: 1) the MOKKITS “pod”, which is attached to the aircraft during flight and 2) the MOKKITS Surface Instrumentation Subsystem (SIS), which remains on the ground at all times. External to these two components is the computers/applications used to prep the system for operations and record/display the data. The complete system requiring sustainment will be referred to in this document as “MOKKITS” and/or “pod” unless otherwise specified.

1.4. PLACE OF PERFORMANCE

The MOKKITS/pods are used primarily at the following locations: Misawa Air Base (AB), Japan; Osan AB, Republic of Korea; Kunsan AB, Republic of Korea; and Kadena AB, Japan, but can be temporarily relocated/transported and used at any location within the United States Indo-Pacific Command (USINDOPACOM) Area of Operations (AOR).

Operating Locations. MOKKITS is operated at permanent sites as indicated below:

Table 1 Operating Locations

1 SIS

1 SIS

2 SIS

4 SIS

* Number of pods at any location may vary. Total pod count does not include 3 additional pods reference para 2.1.6.1.

1.5. PERIOD OF PERFORMANCE

The total period of performance shall not exceed five (5) years and six (6) months:

APPROX

APPROX

SECTION II – PERFORMANCE REQUIREMENTS

2.1. SUSTAINMENT/LOGISTICS/OPERATIONS SUPPORT. The contractor will provide support at each operating site sufficient to meet operations schedule of assigned flying units.

2.1.1. OPERATIONS SUPPORT. The contractor shall maintain the necessary workforce and task coverage to ensure MOKKITS pods and SIS are available to support the flying mission. The contractor shall determine appropriate work schedules to support the operations schedule.

2.1.1.1. SCHEDULING. The contractor shall ensure availability of all pods required to support the flight schedule. The flight schedule will be provided by flying squadron schedulers by email to both MOSC and MSC site managers by 1600 on Friday week prior. Any changes to the weekly schedule will be provided by email at least 24 hours prior and daily schedules be sent by email the day prior to flying.

2.1.1.2. POD.

2.1.1.2.1. A Government representative shall verify that successful data was retrieved from the POD by reviewing the Data Transfer Device (DTD) during replay / debrief of mission data.

2.1.1.2.2. If a sortie that failed to track data in the POD during the flying mission can be traced to an aircraft-related failure, the contractor shall report the tail number and pod number to the Quality Assurance Evaluator (QAE) and the unit responsible for maintaining that specific aircraft.

2.1.1.3. SIS.

2.1.1.3.1. The contractor shall ensure the SIS is fully mission capable at locations indicated in Table 1 and respond to problems/issues from Government/MOSC only as required.

2.1.1.3.2. The contractor shall provide 4 (four) new Ethernet SIS (ESIS)/RTS for use as indicated Table 1 above. Contractor may convert current GFE serial SIS installed at Misawa/Kunsan/Kadena or provide replacement GFE to meet the 4 required.

2.1.1.3.3. The contractor shall provide training only to the initial cadre of MOSC personnel (no more than two persons at each site) in proper procedures to set-up/configure SIS for successful operations of Live Monitor ICADS, to include JAAM/J-ACE SW integrated with ICADS with MOKKITS data. The MOSC shall be responsible for training new/additional personnel after initial training.

2.1.1.4. RAMPOD.

2.1.1.4.1. The contractor shall use the Reliability, Accountability, and Maintainability for Pods (RAMPOD) on-line program to update pod / SIS location and status on a daily basis (Par 1.3.1).

2.1.1.4.2. Contractor shall update operations availability status of each pod / SIS via the Reliability, Availability, and Maintainability for PODS (RAMPOD) maintenance data collection database NLT 1600 local time daily. Table 1 indicates the number of pods assigned for each site although quantities may fluctuate due to mission requirements.

2.1.1.4.3. Contractor shall ensure all FMC pods are available (as reported in RAMPOD) at start of each flying day’s mission 120 minutes prior to scheduled take-off time. The MSC shall ensure ballast weights are attached as required. A requirement for weighted pods should be communicated at least 5 days prior to the requirement. Changes to the flying schedule may be required to accommodate aircraft availability, operational requirements, and weather conditions. Contractor shall resolve scheduling conflicts / problems through the Contracting Officer Representative (COR).

2.1.2. PREVENTATIVE MAINTENANCE. Preventive maintenance is inspection and simple or minor preservative measures and the replacement of small standard parts not involving complex assembly of the item being serviced. Contractor shall conduct preventative maintenance in the field per contractor’s maintenance documentation and schedule (e.g. daily, monthly, peruse, flying hour), to include 100 hour replacement of UHF antennas. Preventative Maintenance shall be conducted on pods, SIS/ESIS, and any Peculiar Support Equipment (PSE) (e.g. RF and MIL-STD-1553 Test Sets).

2.1.3. REPAIR. The contractor shall provide all depot and logistic support for CFE / GFE MOKKITS pods / SIS to include all common and peculiar support equipment, spares, overhaul, and logging of maintenance data.

2.1.3.1. Contractor shall repair pod/SIS either in the Field or at Depot, depending upon severity and complexity of the problem. The contractor will provide support at each operating site sufficient to meet operations schedule of assigned flying units. Contractor shall be responsible for all costs to repair unless repairs are due to accident/negligence.

2.1.3.2. The contractor shall notify MOSC and COR of potential mission impacts if repairs are unable to be accomplished in time to meet mission requirements.

2.1.4. TRANSPORTATION - The Government will designate/identify operating locations and schedule requiring movement of pods to meet operational requirements for exercises or additional training requirements at permanent sites. Pods may be transported by captive-carry on deploying aircraft or be prepared and shipped by MOSC. The MSC is not responsible for shipping pods for operational support.

2.1.5. ENGINEERING SUPPORT.

2.1.5.1. Engineering support shall be provided to address change/problems/issues affecting performance of the MOKKITS.

2.1.5.2. Engineering support for Sustainment also refers to assistance field/depot technicians. Engineering support provides/resolves end of life and obsolete part issues and conduct analysis for replacement parts, update drawings, conduct tests in MSC’s System Integration Lab (SIL) for both hardware and software

2.1.6. SPARES.

2.1.6.1. Contractor shall provide all required spares necessary to ensure satisfactory performance of the GFE/CFE pods and SIS.

2.1.6.2. In addition, the contractor shall provide following contingency assets, which will be used by MOSC during normal flying operations.

2.1.6.2.1. Contractor shall provide 3 (three) replacement/spare pods and/or replacement equipment for life cycle of 10 years from contract start work date.

2.1.6.2.2. Contractor shall provide 2 (two) new spare ESIS (in addition to 4 (four) referenced in para 1.1.3.2) for repair/replacement of field operated units. Contractor shall provide quantity 4 (four) ESIS and supporting RTS SW for Live Monitoring as GFE to MOKKITS Operations Contract. RTS HW will be provided GFE.

2.1.6.2.3. The contractor shall provide DTDs to support all MOKKITS sorties. Accountability of the DTDs will be transferred to the MOSC for use during operations. Failed devices will either be replaced by the MSC or repaired IAW the MOKKITS SSP by MOSC personnel using components provided by the MSC.

2.1.6.2.4. Replacement DTD. Contractor shall provide 12 (twelve) replacement (failures/loss) DTDs within 6 (six) months of contract start work date as GFE to MOKKITS Operations contract.

2.1.6.3. The contractor shall ensure a current Seek Eagle certification for each type GFE / CFE pod prior to operational use on any type aircraft.

2.1.6.4. GOVERNMENT PROPERTY - The contractor shall provide the existing CFE pods and all existing required additional supplemental equipment for both GFE and CFE (umbilical’s, tools, spares, software, hardware, upgrades, etc.) to meet operational mission requirements. CFE pods will be transferred from Contract FA5215-21-C-0011 as GFE.

2.1.7. TRANSITION.

2.1.7.1. The contractor shall conduct inventory of all GFE/CFE equipment at each of the operating sites with Government, incumbent and new, if applicable, contractor. All property will be accounted for and documented with identified GFE/CFE transferred to the MOSC for accountability.

2.1.7.2. The contractor shall document transfer of current DTDs to support all MOKKITS sorties. Failed devices will either be replaced by the MSC or repaired IAW the MOKKITS SSP by MOSC personnel using components provided by the MSC.

2.1.7.3. Contractor’s Engineering shall recommend Engineering Changes as required to address performance issues and coordinate them with Government/COR/CO/PACAF/A317.

2.1.7.3.1. Contractor shall coordinate changes to the configuration of the formal hardware and software baseline with the COR.

2.1.7.3.2. Contractor shall update applicable technical data / documentation and obtain recertification as required for changes in pod configuration. Contractor shall update Interface Control Documentation and provide Commercial off the Shelf (COTS) Manuals, as required. Contractor shall update pod / display system software as required due to aircraft Operational Flight Program (OFP) changes. Changes beyond aircraft configuration at contract award will be addressed with a contract modification.

2.2. CONFIGURATION MANAGEMENT. The contractor shall provide hardware and software engineering and technical support to maintain system performance requirements, to include replacement of obsolete parts, as identified in this PWS. While not anticipated, engineering and technical support for special operational activities; maintenance engineering; identification and implementation of system improvements, upgrades, and modifications; and other engineering and technical activities intended to improve operation and maintenance performance and capabilities will be incorporated by modification.

2.2.1. SOFTWARE.

2.2.1.1. Contractor shall coordinate changes to the configuration of the formal hardware and software baseline with PACAF/A317.

2.2.1.2. The contractor shall establish and maintain a configuration accounting system that will readily provide in clear format, accurate, and timely information describing the approved configuration of all configuration items under this contract, the status of proposed changes, and the implementation status of approved changes.

2.2.1.3. The contractor shall maintain a backup copy of the formal MOKKITS software baseline to support reestablishment of software in case of loss or failure.

2.2.1.4. The contractor shall update O&M level software and documentation as required on pods to ensure the MOKKITS system-wide software baseline is maintained.

2.2.1.5. The contractor shall ensure compatibility of MOKKITS mission/data files with ICADS/SIS and Joint Air Air Model/Joint Anti-Air Combat Effectiveness (JAAM/J- ACE) software (co-resident on ICADS).

2.2.1.6. Changes beyond aircraft configuration/OFP versions at contract award will be address with a contract modification.

2.3. DELIVERABLES.

2.3.1. Operations Documentation. Contractor shall provide and update as required Operations / User’s manuals to facilitate pod loading, UHF antenna replacement procedures, Data Transfer Device (DTD) repair/replacement of Flash memory components, pre / post mission data preparation, SIS mission debrief and MOKKITS merge procedures.

2.3.2. Monthly Performance Report. Contractor shall provide Government representatives a monthly report detailing significant / relevant issues regarding operational performance and any outstanding issues / concerns regarding contractor’s ability to meet the requirements of the PWS. The report shall be due 15 calendar days after the end of the reporting month.

2.3.3. Reports - The contractor shall complete / submit reports as detailed within this PWS.

SECTION III – GENERAL REQUIREMENTS

3.1. GFP.

3.1.1. FACILITIES. The Government will furnish or make available facilities for MOKKITS support. These facilities will be shared or joint use between MSC and MOSC personnel. A maintenance area will be designated at each location and minimal desk/office space provided for MSC personnel, Compliance with the occupational safety and health requirements for the contractor’s employees is exclusively the obligation of the contractor. Government assumes no liability or responsibility for the contractor’s compliance or non-compliance with such requirements, with the exception of the aforementioned requirement to make corrections according to approved plans of abatement subject to base-wide priorities. Facilities provided by the Government shall be used only in the performance of this contract.

3.1.2. EQUIPMENT. The Government will provide the contractor equipment / property as required in this PWS. The contractor is responsible for maintaining all Government- furnished equipment. The contractor and QA personnel shall conduct a joint inventory at the start and expiration of this contract. The contractor shall provide / update report / inventory of all Government furnished property / equipment. Contractor shall update the report / inventory monthly and submit inventory annually. The Government will replace equipment when necessitated by fair wear and tear. The contractor is responsible for replacement if necessitated by loss or damage beyond fair wear and tear.

3.1.3. VEHICLES. The contractor shall ensure all vehicle operators are trained, certified, and licensed as required by all governing regulations. Contractor personnel shall follow base procedures and regulations regarding vehicle registration, vehicle operation, traffic, base access, and accident reporting. At the direction of the CO, contractor employees may be removed for significant incidents involving contractor private vehicles on or off military installations. Any violations of traffic or safety regulations shall be referred to the contractor for prompt, aggressive action. The government may revoke or suspend driving privileges on military installations for privately owned vehicles and for all contractor vehicles.

3.1.4. SERVICES. Contractor personnel in Japan and Korea shall be authorized logistics support services and other protections and entitlements, as authorized by the Contracting Officer and the respective installation commander, and within the limits of the respective country’s Status of Forces Agreement. Authorization of these services, protections, and entitlements are contingent on the Contracting Officer’s review of required documents and execution of instructions prescribed by United States Forces Japan or United States Forces Korea, whichever is applicable.

3.2. SAFETY.

3.2.1. CONTRACTOR COMPLIANCE. The contractor and its subcontractors shall comply with Public Law 91-596 (Occupational Safety and Health Act (OSHA)) and the Environmental, Safety, and Occupational Health (ESOH) (DODD 4715.1E). These requirements shall be incorporated into the contractor's safety and health program. The Department of Defense (DoD) participates in the OSHA Voluntary Protection Program (VPP). Contractor personnel performing services on a DoD installation shall participate in the local VPP. Information on the VPP is available at http://www.osha.gov/dcsp/vpp/index.html.

3.2.2. MISHAP NOTIFICATION AND INVESTIGATION. The contractor and its subcontractors (if applicable) shall promptly report pertinent facts regarding mishaps involving Government property damage or injury to Government personnel and to cooperate in any resulting safety investigation. The contractor shall notify (via telephone) the cognizant contracting officer, the contracting officer's representative, and/or other applicable members within four (4) hours of all mishaps or incidents. The Government person notified by the contractor will in-turn notify the Safety office. Contractor notifications made after duty hours shall be reported to the appropriate installation Command Post. If requested by the cognizant contracting officer, the contracting officer's representative, and/or the cognizant program manager, the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records until released by the investigating safety office. If the Government investigates the mishap, the contractor and the subcontractors shall cooperate fully and assist the Government personnel until the investigation is completed.

Current Safety Representatives and Building Managers Misawa Safety: xxx Building Manager: xxx

Osan Safety: xxx Building Manager: xxx

Kunsan Safety: xxx Building Manager: xxx

Kadena Safety: xxx Building Manager: xxx

3.2.3. INSPECTION. The contractor shall establish a safety program that includes preventative measures and delineates safety goals and objectives. The contractor shall support an annual Government safety inspection and unscheduled spot inspections at each location. The Government safety personnel shall perform a formal scheduled safety inspection of the contractor’s workplace once every 12 months. In addition, unscheduled spot safety inspections shall be conducted as necessary to insure the Government of safe contractor operations and Government safety support. The contractor shall provide written replies within 30 days of the safety inspection report date on actions taken. All inspection reports, replies, and related correspondence shall be routed through the COR to HQ PACAF/A317. It is not the intent of the Government to have the U.S. Government Safety Inspection Program replace internal safety surveillance by the contractor or inspection programs required by other federal agencies.

3.3. SECURITY.

3.3.1. PERSONNEL SECURITY.

3.3.1.1. The Contractor shall adhere to the provisions of 32 CFR Part 117, National Industrial Security Program Operating Manual; DODD 5220.6, Defense Industrial Personnel Security Clearance Review Program; DODD 5200.2-R/AFI 31-501 Personnel Security Program Management; and all other applicable DoD directives, AF instructions, and local installation policies pertaining to safeguarding classified information.

3.3.1.2. DD FORM 254. Overarching security requirements and Contractor access to classified information shall be as specified in the DD Form 254, which will be amended as required. All contractor personnel with access to unclassified information systems, including e-mail, shall have at a minimum a favorable National Agency Check (NAC) and a SECRET clearance.

3.3.1.3. VISITOR GROUP SECURITY AGREEMENT. The contractor shall sign a Contractor Visitor Group Security Agreement to protect classified information involved in performance under this contract. The Agreement will outline responsibilities in the following areas: Contractor security supervision; Standard Practice Procedures; access, accountability, storage, and transmission of classified material; marking requirements; security education; personnel security clearances; reports; security checks; security guidance; emergency protection; protection of government resources; DD Forms 254; periodic security reviews; and other responsibilities, as required.

3.3.2. BASE SECURITY.

3.3.2.1. PHYSICAL SECURITY. Contractor shall be responsible for safeguarding all Government property provided for contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured, and utilities turned off or set for conservation.

3.3.2.2. IDENTIFICATION AND BASE PASSES. The contractor shall obtain identification cards and base passes for all employees and vehicles. Application shall be coordinated through the Contracting Officer or designated representative. At time of application, Security Forces may conduct a background check on employees. Upon termination of employment, the contractor shall return identification cards and base passes to Security Forces within 24 hours.

3.3.2.3. KEY CONTROL. The contractor shall establish and implement methods of ensuring that all keys issued to the contractor by the Government are not lost or misplaced and are not used by unauthorized persons. The contractor shall report lost keys to COR personnel. The contractor shall not duplicate any keys for government facilities. The Government may, at its option, require the contractor to replace keys, reimburse the government for replacement of locks, or re-key as a result of contractor losing keys. In the event a master key is lost or duplicated, the contractor shall replace all locks and keys for that system and the total cost will be deducted from the monthly payment.

3.4. QUALITY CONTROL.

3.4.1. The Contractor shall develop a Quality Control Plan (QCP) and maintain an effective quality control program to ensure services are performed in accordance with the contract and this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor's QCP is the means by which he assures himself that his work complies with the requirement of the contract. The contractor’s PM shall implement procedures to encourage early problem identification and expeditious COR notification IAW the contractor’s Quality Control Plan. Additionally, the program shall ensure early detection and cost-effective corrective action of actual or potential deficiencies in services or material, marginal performance, system inconsistencies, and trends or conditions which could result in unacceptable products or service.

3.4.2. The finalized QCP will be accepted by the Government at the time of the award. The Contracting Officer may notify the Contractor of required modifications to the plan during the period of performance. The Contractor then shall coordinate suggested modifications and obtain acceptance of the plan by the Contracting Officer. Any modifications to the program during the period of performance shall be provided to the Contracting Officer for review no later than 10 working days prior to effective date of the change. The QCP shall be subject to the Government's review and approval. The Government may find the QCP "unacceptable" whenever the Contractor's procedures do not accomplish quality control objective(s). The Contractor shall revise the QCP within 10 working days from receipt of notice that QCP is found "unacceptable."

3.5. QUALITY ASSURANCE

3.5.1. The Government shall monitor the Contractor's performance in accordance with the Government's Quality Assurance Surveillance Plan (QASP). The (QASP) is a government-developed document used to determine if the contractor's performance meets the performance standards contained in the contract. The QASP establishes procedures on how this assessment/inspection process will be conducted. It provides the detailed process for a continuous oversight process. The QASP provides the structure for the government's surveillance of the contractor's performance to assure that it meets contract standards. It is the government's responsibility to be objective, fair and consistent in evaluating contractor performance.

3.5.2. The CO is the only person authorized to approve changes in any of the requirements under this PWS and any provisions contained elsewhere in this contract. The Government will appoint / designate a Contracting Officer Representative (COR) for overall contract surveillance and a Quality Assurance Evaluator (QAE) at each permanent site as the Government's point of contact for receipt of services and to coordinate daily operations / wing / local issues in accordance with (IAW) this PWS.

3.6. PERSONNEL ADMINISTRATION.

3.6.1. The contractor shall provide all management and support as required necessary to fulfill all requirements specified in this PWS. The contractor shall provide for employees during designated Government non-work days or other periods where Government offices are closed due to weather or security conditions. The contractor shall maintain the currency of their employees by providing initial and refresher training as required to meet the PWS requirements. The contractor shall make necessary travel arrangements for employees. The contractor shall provide necessary infrastructure to support contract tasks.

3.6.2. KEY PERSONNEL. The contractor shall accomplish the assigned work by employing and utilizing qualified personnel with appropriate combinations of education, training, and experience. The contractor shall match personnel skills to the work or task with a minimum of under/over employment of resources.

3.6.3. EMPLOYEES. The contractor shall not employ persons for work on this contract if such employee is identified to the contractor by the contracting officer as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population.

3.6.4. SPECIAL QUALIFICATIONS. All employees shall be trained and experienced in their trade in accordance with industry standards. Manpower levels shall be maintained to meet contractual requirements. A loss of manpower shall not excuse the contractor of nonperformance under this contract. Knowledge and experience is required in software / hardware upgrades, maintenance and repair, loading and offloading pods requirements. All employees shall be licensed and/or certified if performing work for which licenses and certifications are required by applicable laws and regulations.

3.6.5. RECORDS. The contractor shall keep records current and organized at all times. Occasionally, COR personnel may require copies of documentation or electronic data. The contractor shall provide requested information within 2 hours for urgent requirements or within 1 working day for routine requirements. Unless otherwise specified by COR personnel, the contractor may provide reports and requested information electronically, such as on disk or by email. All documentation described in this statement of work, including automated data, is property of the Government and shall remain so upon expiration of this contract.

3.6.6. EXTERNAL AGENCIES. Contractor shall coordinate and cooperate with various Government agencies and other contractors as required to ensure success of MOKKITS operations. Contractor shall schedule, coordinate, and resolve conflicts, etc., with external agencies associated with the performance of this Contract. The COR / Contracting officer will resolve conflicts as necessary.

3.7. SCR. In accordance with the Department of Defense (DoD) Policy on Service Contract Reporting (SCR) on SAM.gov, applicable to all instruments that require the performance of services, including contracts for goods with defined requirements for services, data shall be reported using within SAM.gov.

SECTION IV – PERFORMANCE REQUIREMENT SUMMARY

Paragraph Performance Threshold

Pod Availability 2.1.1.

2.1.2.

2.1.3.

2.2.

90% of pods on station are available to support missions daily

supported; available for load 120 minutes prior to scheduled take-off time

successfully retrieved from the POD by reviewing the DTD during replay / debrief of mission data

SIS Performance 2.1.1.3.1.

2.1.2.

2.1.3.

2.2.

100% Fully Mission Capable SIS