A04_UTV_SPECIFICATION.pdf

General Use UTV Specification Form

Use this form to record the options selected from the Standard Model Check Sheets

Vehicle Specifications:

• ROPS: Vehicle will have a standard Roll Over Protection System (ROPS) that complies with H-1112-1, Ch.

17, D.1.m.(1)-(5), dated 5/26/2016. Most UTV/OHV manufacturers include ROPS structures that comply with OSHA 29 CFR 1928.51-.53, which is considered to be the industry standard for performance of structures and devices included in these systems. The OSHA standard is identified as an acceptable standard for ROPS in the BLM Safety and Health Management Handbook, H-1112-1, as previously mentioned. Additional voluntary ROPS guidance not listed in the BLM handbook can be found in the ANSI/ROHVA 1-2016 published by the Recreational Off-Highway Vehicle Association in collaboration with the American National Standards Institute.

• Seating Configuration: 3 Person Capacity

• Drive Axles High Performance On-Demand True AWD/2WD/VersaTrac Turf Mode

• Engine 999cc, 4-Stroke Twin Cylinder DOHC 82 horsepower

• Engine Displacement 999cc

• Cooling System Liquid, 6qts capacity

• Transmission Single Lever (H/L/N/R/P) transmission, Automatic PVT

• Power steering Electric

• Front/Rear Brakes Foot Activated, 4 wheel hydraulic disc with dual-bore front calipers

• Parking Brake Park In-transmission

• Suspension Front: Dual A-Arm 11.0 in (27.9 cm) Travel, Rear: Dual A-Arm, IRS 11.0 in (27.9 cm) Travel

• Ground Clearance 13 in (33 cm)

• Lighting Dual LED Headlamps, 1250lm Low Beam, 2300lm High Beam, Dual LED Taillamps

• Capacities Fuel-11.5 gal, GVW 3,600 lb, Payload 1,275 lbs

• Rear Cargo Box 1,000 lbs (453.6 kg), 36.75 x 54.25 x 12.5 in

Attachment 3

• Front/Rear Bumpers Standard issue by manufacturer

• Brush Guard N/A

• Skid Plates Factory installed

• Doors 2 doors, Premium Pro-Shield Cab, Doors with Crank Windows, Fixed Glass Windshield with Wiper, Rear Glass Panel, Dome Light, Rearview Mirror, Heat, AC, Defrost, Premium Cut & Sew Seats with Contoured Seatbacks, Premium Steering Wheel and Interior Accents

• Hitch Receiver Standard 2 in (5 cm) Receiver, 2,500 lb capacity tow rating

• Tires Front- 27 x 9-14; Pro Armor X-Terrain, Rear- 27 x 11-14; Pro Armor X-Terrain. 8 ply

• Wheels 14” Aluminum

• Speed top rated speed up to 66MPH

• Instrumentation- Dual-sweep Analog Dials w/ 4" LCD Rider Information Center: User Selectable Blue/Red Backlighting & Brightness, Programmable Service Intervals, Speedometer, Tachometer, Odometer, Tripmeter, Clock, Hour Meter, Gear Indicator, Fuel Gauge, Coolant Temperature, Voltmeter, Service Indicator and Codes, Seat Belt Reminder, 1 DC Outlet, 1 USB Charge Port

• 65” width, 81” wheelbase

• Other standard features- HD 4,500 Lb. Synthetic Rope Winch with Autostop and Wireless Remote, Premium Pro-Shield Cab, Doors with Crank Windows, Fixed Glass Windshield with Wiper, Rear Glass Panel, Dome Light, Rearview Mirror, Heat, AC, Defrost, Premium Cut & Sew Seats with Contoured Seatbacks, Premium Steering Wheel and Interior Accents, Pulse Electrical System with 6-Position Underhood Busbar and 6-Position Roof Busbar, Standard In-Dash SAE Charge Port, NFC Front Badge

• Trade-in information. 2007 Kubota RTV 900 Diesel 4x4, 670 hrs on machine. Just the UTV, plow and spreader NOT included

Optional equipment: Dealer or Third Party Providers

• Backup alarm

• Fire Extinguisher Mount (5 lb)

• Extended warranty- 48 month Protection Plan

• Boss v-plow undercarriage mount. LTA12380B

Heavy Payload UTV Specification Form

Use this form to record the options selected from the Standard Model Check Sheet Vehicle Specifications:

• ROPS: Vehicle will have a standard Roll Over Protection System (ROPS) that complies with H-1112-1, Ch.

17, D.1.m.(1)-(5), dated 5/26/2016. Most UTV/OHV manufacturers include ROPS structures that comply with OSHA 29 CFR 1928.51-.53, which is considered to be the industry standard for performance of structures and devices included in these systems. The OSHA standard is identified as an acceptable standard for ROPS in the BLM Safety and Health Management Handbook, H-1112-1, as previously mentioned. Additional voluntary ROPS guidance not listed in the BLM handbook can be found in the

• Seating Configuration:

• Drive Axles

• Engine

• Engine Displacement

• Fuel System

• Cooling System

• Transmission

• Power steering

• Front/Rear Brakes

• Parking Brake

• Suspension

• Ground Clearance

• Lighting

• Capacities

• Rear Cargo Box

• Front/Rear Bumpers

• Brush Guard

• Skid Plates

• Doors

• Hitch Receiver

• Tires

• Spare Tire

• Wheels

• Speed

• Documentation

• Cargo racks

• Accessory Lighting

• Fully enclosed Cab

• Roof Covering

• Winch

• Windshield

• Snow Plow Kit

• Speed Governor/speed limiter kit

• Electrical switch/accessory component bank

• Backup alarm

• Vehicle Color

• Cargo box liner

• Spare Tire mount

• Tool mount (shovel, jack, etc.)

• Tool Kit

• Fire Extinguisher Mount (5 lb)

• Trade In:

Single Seat UTV Specification Form

Use this form to record the options selected from the Standard Model Check Sheet

Vehicle Specifications:

• ROPS: Vehicle will have a standard Roll Over Protection System (ROPS) that complies with H-1112-1, Ch.

17, D.1.m.(1)-(5), dated 5/26/2016. Most UTV/OHV manufacturers include ROPS structures that comply with OSHA 29 CFR 1928.51-.53, which is considered to be the industry standard for performance of structures and devices included in these systems. The OSHA standard is identified as an acceptable standard for ROPS in the BLM Safety and Health Management Handbook, H-1112-1, as previously mentioned. Additional voluntary ROPS guidance not listed in the BLM handbook can be found in the

• Engine Displacement

• Rear Cargo Box

• Brush Guard

• Doors

• Hitch Receiver

• Speed

• Documentation

• Cargo racks

• Accessory Lighting

• Fully enclosed Cab

• Roof Covering

• Winch

• Windshield

• Vehicle Color

• Spare Tire mount

• Tool mount (shovel, jack, etc.)

• Tool Kit

• Fire Extinguisher Mount (5 lb)

• Extended warranty

• Trade In:

Extreme Terrain UTV Specification Form

Use this to record options selected from the Standard Model Check Sheet

Vehicle Specifications:

• ROPS: Vehicle will have a standard Roll Over Protection System (ROPS) that complies with H-1112-1, Ch.

17, D.1.m.(1)-(5), dated 5/26/2016. Most UTV/OHV manufacturers include ROPS structures that comply with OSHA 29 CFR 1928.51-.53, which is considered to be the industry standard for performance of structures and devices included in these systems. The OSHA standard is identified as an acceptable standard for ROPS in the BLM Safety and Health Management Handbook, H-1112-1, as previously mentioned. Additional voluntary ROPS guidance not listed in the BLM handbook can be found in the

• Fuel System

• Suspension Travel

• Wheel base

• Hitch

• Cargo box

Optional equipment

• Fully enclosed Cab

• Heater

• Air Conditioner

• Cargo racks

• Accessory Lighting

• Roof Covering

• Windshield

• Doors

• Restraining Harness

• Spare Tire mount

• Tool mount (shovel, jack, etc.)

• Tool Kit

• Fire Extinguisher Mount (5 lb)

• Trade In: