(A04)_SPECIFICATION_SHEET_0040609072.pdf

SPECIFICATIONS

Mercury ELPT SeaPro

Outboard Motors

Product Features:

Name of Items:

Three (3) - 115 HP Commercial outboards Two (2) - 150 HP Commercial outboards

Manufacturer: Mercury Model Number: SeaPro 115 EXLPT; SeaPro 115 ECXLPT; SeaPro 150 EXLPT or approved equal.

Salient Characteristics:

A four-stroke outboard engine specifically designed for commercial workboats. The Mercury SeaPro engine was engineered with stiffer upper mounts and more stainless steel than other 4-stroke outboards. It has also been calibrated to meet commercial duty cycles, delivering more power with less engine stress. The Mercury SeaPro 115 EXLPT Outboard Engine is the only outboard specifically designed for a commercial workboat appropriate for our Sturgeon Boat rigged singularly. The Thor Electrofishing Boat would be rigged with dual SeaPro 115 EXLPT and ECXLPT outboards, to replace the existing 115 HP outboards it currently has. The Efish electrofishing boat would be more appropriately rigged with a SeaPro 150 EXLPT, as it is a larger platform and requires a larger motor. Similarly, the Helix Boat is the same size as Efish, and would also be best suited for a SeaPro 150 EXLPT.

Specifications and Quantity:

Mercury SeaPro 115 EXLPT – Quantity: 2 (two)

• 115 hp 8-valve single overhead cam (SOHC) Inline 4

• Computer Controlled Multi-Port Electronic Fuel Injection (EFI)

• Smart Start Electric Starter

• 25” shaft

• Gearcase Ratio 2.38:1

• Bore and Stroke 3.5 x 3.2”

• Power Tilt (-6 to 64 degrees)

• Power Trim (-6 to 16 degrees)

• 363 lb. dry weight

• Water-cooled with thermostat

Mercury SeaPro 115 ECXLPT – Quantity: 1 (one)

• 115 hp 8-valve single overhead cam (SOHC) Inline 4

• Rotation: Counter

• Computer Controlled Multi-Port Electronic Fuel Injection (EFI)

• Smart Start Electric Starter

• 25” shaft

• Gearcase Ratio 2.38:1

• Bore and Stroke 3.5 x 3.2”

• Power Tilt (-6 to 64 degrees)

• Power Trim (-6 to 16 degrees)

• 363 lb. dry weight

• Water-cooled with thermostat

Mercury SeaPro 150 EXLPT – Quantity: 2 (Two)

• 150 hp 8-valve single overhead cam (SOHC) Inline 4

• Computer Controlled Multi-Port Electronic Fuel Injection (EFI)

• Smart Start Electric Starter

• 25” shaft

• Gearcase Ratio 1.92:1

• Bore and Stroke 4.0 x 3.6”

• Power Tilt (-6 to 67 degrees)

• Power Trim (-6 to 16 degrees)

• 455 lb. dry weight

• Water-cooled with thermostat email preferred

Capabilities:

All vessels mentioned above are regularly worked long hours and low idle speeds and under loads which traditional outboard motors are not well designed for. The outboards will be used with our work boats and they must stand up to the daily demands of a commercial workboat. This includes operating in rivers and lakes, moving heavy loads of gear, idling for extended periods of time, and operating continuously for extended periods of time. Photos of the boat have been included in a PDF.

Delivery and Installation:

The Green Bay Fish and Wildlife Conservation Office (FWCO) is responsible for transporting our four vessels within a 75-mile radius to the contractor. The Green Bay FWCO is also responsible for picking up the vessels after the job has been completed to specifications at the industry standard. The Contractor is responsible for any transportation beyond a 75-mile radius of the Green Bay FWCO located at the following address. The Contractor is also responsible for crating the old removed outboard motors. The contractor will load the old outboards onto Green Bay FWCO trucks at the same time the vessels are picked up, upon completion of work.

Green Bay Fish and Wildlife Conservation Office:

2661 Scott Tower Drive New Franken, WI 54171

Technical Point of Contact (POC):

Nathan Barton Email: nathan_barton@fws.gov Phone: 920-510-4312 GOV cell mailto:nathan_barton@fws.gov