A04_SOW_RFQ_Wilson_Well_replacement_2023.pdf
PDF 79 KB Posted
- Attached to
- TX UVALDE NFH WILSON WELL PUMP REPAIR
- Solicitation number
- 140FS223Q0115
About this file
This statement of work describes a solicitation to replace the vertical turbine pump at the Wilson Well at the Uvalde National Fish Hatchery in Texas. The scope of work includes removing the existing 480 volt, 60 horsepower motor and 200 foot deep pump components, replacing them with a new motor, pump shafts, wear rings, column, bowl casing and impellers, conducting a 24 hour pump test to collect water level data, and providing the test results to the station manager. Bidders are requested to inspect the worksite in advance by contacting the named project leader. The related federal contract opportunity provides additional details, with solicitation number 140FS223Q0115 to repair the Wilson Well pump issued by the Department of the Interior Fish and Wildlife Service.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140FS223Q0115.pdf | ||
| B03_Wage_Determination_Uvalde_County_Uvalde_TX.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WILSON WELL MAINTENANCE UVALDE NATIONAL FISH HATCHERY
TEXAS
MANAGER’S ESTIMATE
Item Description Estimated
Quantity Unit
Unit
Price Amount
Remove existing motor and pump;
inspect; provide cost estimate for repair 1 job
Shop labor to disassemble and reassemble bowl after repairs 1 job
3 New 60 HP 460v, 3 ph, US motor 1 Job
4 New 12CLC, 5 stage Goulds Pump End 1 job
New 8” Column assembly (includes new
8” carbon steel column pipe, new rubber inserts for shaft retainers, and new stainless steel shafting)
1 job
6 Misc. Supplies and Materials Required for Installation 1 job
7 Mobilize Equipment and Install 1 job
Perform 24 hour pump test 1 job
Total
WILSON WELL MAINTENANCE UVALDE NATIONAL FISH HATCHERY
TEXAS
1.01 STATEMENT OF WORK
A. Furnish all labor, equipment, and materials necessary to replace the vertical turbine pump at Wilson Well with all requirements of this solicitation at the Uvalde National Fish
Hatchery, Texas. Work includes the following:
1. Remove the 480 volt, 3 phase, 60 hp variable speed motor. Remove the pump shafts, pump shaft wear rings, pump columns, and pump bowl which is located at a depth of 200 feet.
2. Replace the motor, pump shafts, pump shaft wear rings, pump column, bowl casing, and impellers.
3. Provide a detailed estimate of material, equipment and labor costs to replace the pump and motor to its original condition.
4. Assemble and install pump and motor.
B. Using the assembled pump and motor, conduct a pumping test for 24 hours: while maintaining a constant discharge, record draw down water levels from ground surface, using an electric sounder.
C. Provide a copy of data to the station manager.
D. Cost of all work required by this solicitation, including labor, equipment, materials, overhead, profit, and taxes, are to be included in the bid schedule. Measurement of work, for payment, will be based on the actual work performed. Payment will be made at the unit prices bid in the schedule for the required items of work.
1.02 SITE INSPECTION
A. Prospective bidders are requested to visit the worksites prior to submitting a bid. Inspection of each site should be arranged in advance by contacting Dr Scott Walker, Project Leader, Uvalde National Fish Hatchery, telephone 830-278-2419.
B. The Uvalde National Fish Hatchery is located on County Road 203. From Uvalde, drive west on Hwy. 90, turn left onto County Road 203, drive approximately 1 mile.
File details come from the government source that posted it. Updated .