A04_SOW.docx

Statement of Work:

Three law enforcement vehicle de-installation of agent vehicles and installation/up-fitting of new vehicles.

(1) 2022 F150

Notes on equipment for installations:

The equipment needed for installation will be a combination of new and reused parts. Items that will be reused, but there may be an unforeseen possibility that some of these items will not work with the new vehicle or are found to be in disrepair once they are removed from the old vehicle. Quotes are not required to reflect this possibility. The BLM will be responsible for the cost of a new part above and beyond the initial quote if any part is found to be unusable at the time of installation. However, the vendor will be required to notify the BLM of any unusable part, suggested replacement part, and obtain approval before purchase and installation.

For all new parts needed to complete the installation, the vendor must include manufacturer, model, and itemized price of equipment in the quote. All new parts must meet the below set standards or specific make or model as noted or be equivalent. The BLM has the right to disqualify any part that is deemed not comparable or found to be unsatisfactory.

LED Red/Blue Lights: As noted below, for the LED Red/Blue lights the preferred manufacturers are SoundOff Signal or Code3. The preferred part is the SoundOff Signal model EMPS1STS3(X) or equivalent. Vendor will consult with BLM on preferred placement locations prior to installation.

I. STRIP EXISTING VEHICLE(s) OF LAW ENFORCEMENT EQUIPMENT (2) Chevy Tahoes:

1. Plug roof and body holes

2. Ensure all OEM equipment and lighting are functioning

3. Strip all law enforcement (Non-OEM) parts from truck

4. Retain all useful parts for install into new vehicle

5. All parts not re-used will be returned to BLM

II. INSTALLATION OF NEW PATROL VEHICLE(s) – (2) Chevy Tahoe – (1) F150:

A. FRONT GRILL/ FRONT QUARTER PANEL

1. Install –Four forward facing Code 3 LED light heads (red/blue with clear lens) with mounts behind grill.

2. Install - Two side facing LED, undercover lights (red/blue) on left and right quarter panel or window.

3. Install -Siren speaker behind grill.

4. Install- Two 6 PAK Hide a Blast LED inserts in headlights or parking light housing (white).

5. Install - Wig-Wag Flasher Control for Headlights (high beam).

6. Install- quick disconnect jumper cables (wired to protect emergency lighting)

B. ENGINE COMPARTMENT

1. Install - Charge guard system to prevent battery drain when minimum voltage is reached (minimum voltage has ability to start truck)

2. Install - Circuit breaker, with ability to disconnect emergency equipment from OEM electrical system

C. FRONT WINDOW/WINDSHIELD

1. Install – 35% High quality Window tinting on front driver and passenger side windows.

2. Install – 35% High quality Visor strip window tint on windshield.

D. REAR DOOR/TAILGATE

1. Install -Two 6 PAK Hide a Blast LED Inserts in taillights (red)

2. Install - Two red/blue LED lights undercover (red/blue) mounted to rear door near license plate.

3. Install - One red/blue LED light/undercover lights mounted to interior roof rear window facing to rear.

E. ROOF

1. Install – Undercover VHF Radio antenna

2. Install - “Sat-Rad”/GPS Radio system antenna (dome/disc) or magnet for easy installation on roof for events. (OPTIONAL Agent choice)

F. INSIDE WINDSHIELD / DASH

3. Install - Radio mic clip mount inside console

4. Install – Cellular Booster 4G/5G and exterior antenna

G. CENTER CONSOLE

1. Install - Motorola XTL mobile radio (PROVIDED)

2. Install - Handheld Siren control box

3. Install– Satellite Radio / mic. (PROVIDED)

4. Install – Flush mount 2 port USB charge socket to center console

5. Install Optional Ipad mount/charger

6. Disconnect - Door chime (If applicable).

H. REAR CARGO AREA (SUV)

1. Install – Install locking truck vault cargo box

2. Install Fire Extinguisher (PROVIDED) with heavy duty mount.