A04_SOW.doc

Radio Repeater Service Monitor Test Equipment

1.0 Background

The BLM’s operational mission is to ensure employee safety, public safety, and resource protection through the BLM communication network. The BLM has identified a need to purchase Radio Repeater Service Monitor Test Equipment for the Telecommunications Specialist. Current test equipment is out of date and is well past its lifecycle date. Currently technicians must do operational checks on mobile radios and are not able to perform full preventive maintenance on these radios. With the newer technology in these test sets the technicians will be able to service all radios and repeaters across the state.

2.0 Scope

BLM will purchase six (6) service monitors and all accessories.

3.0 Objectives

· Will be used for radio and repeater maintenance operations.

· Six (6) radio and repeater service monitors.

4.0 Tasks

Service Monitor

· A complete communications test solution (Service Monitor) capable of testing everything from portable radios and infrastructure in a small, rugged form factor

· Must have a 10-inch color touch screen for easy viewing and simple operation

· Must be able to switch between test setups without having to reload settings to save time when operating on battery power

· Meters on the service monitor must be able to resemble analog meters for simple viewing

· Must do AM, FM without any external devices

· AM Range of 0% to 100% with a Resolution of 0.1%

· FM Range of 0 Hz to 100 kHz with a Resolution of 1 Hz

· Frequency range must go from 100kHz to 3GHz

· Must have a built in Spectrum Analyzer with a frequency range of 9 kHz to 3 GHz

· Spectrum analyzer must have a sweep time of 0.4ms to 1000s (minimal Lag time)

· Spectrum Analyzer must have a display range of 1 dB/div to 20 dB/div with 10 divisions

· Must have frequency generator

· Must have the following testing capabilities; Distortion, SINAD, AF Counter, RF Error, Audio Frequency tones Analyzer, RF Power, and VSWR.

· Must have an Oscilloscope function

· Must have an RF duplex port for quicker testing

· Must have an RF Output Port with a Range of -130 dBm to +17 dBm (10 MHz to 1 GHz); +10 dBm for AM and Complex modulation

· Must have an accuracy of ±1.0 dB (output level >-120 dBm, 1 MHz to 6 GHz) ±2.0 dB (output level >-130 dBm, 1 MHz to 6 GHz)

· Must be capable of auto testing Motorola APX series radios

· Must be capable of auto testing BK Technologies KNG series radios.

· Must be capable of P25 Conventional

· Must be capable of P25 Phase I and II

· Must include a rugged Hard Transit carrying case

· Must include RF testing cables

· Must include antenna kit for testing up to 1 GHz

· Must include DC-DC automotive power adapter

· Must include a 10-amp current shunt

· Must include an N Type 40db/2-watt attenuator

· Must include a 6db/150-watt attenuator rated up to 1.5 GHz

· Must be capable of running for longer than 2 hours on internal battery power without swapping or recharging batteries. This will be carried to remote locations via UTV, helicopter and hiking.

5.0 Delivery

· All equipment needs to be shipped or delivered to:

Kevin Wisemore 1340 Financial Blvd Reno, NV 89502

· Needs to be delivered no later than December 20th 2022.

· All cables, parts, and instruction manuals need to be delivered with the equipment.

6.0 Government-Furnished Property

None.

7.0 Security

8.0 Place of Performance

Installation, programming, and setup will be performed by BLM personnel.

9.0 Period of Performance

· 1 year warranty for all equipment.

PAGE