A04_SOW_Boston_Whaler.pdf
PDF 18 KB Posted
- Attached to
- Whaler Repair and Maintenance Lahontan NV
- Solicitation number
- 140FGA24Q0033
About this file
This document is a Statement of Work (SOW) for the repair and maintenance of a 17-foot Boston Whaler boat for the U.S. Fish and Wildlife Service at the Lahontan National Fish Hatchery in Nevada. The SOW outlines the required scope of work, including replacing the fuel pump, repairing the gel coat on the hull, and performing an annual inspection and maintenance to ensure the boat's proper operation. The period of performance is from October 1, 2024, to November 30, 2024. The contractor is responsible for transporting the boat to and from the repair facility. All work will be inspected by the Technical Coordinator to ensure the required repairs and maintenance are completed, and the boat, motor, and hull are functioning properly. The government will not provide any equipment or materials for this requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B03_Wage_Determination_2015-5597_Whaler_Repair.pdf | ||
| A04_Price_Schedule_Whaler_Repair.pdf | ||
| Sol_140FGA24Q0033.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Boston Whaler Repair
1. GENERAL:
The US Fish and Wildlife Service has the need for the repair and maintenance of a 17-foot Boston Whaler boat at the Lahontan NFHC. The boat motor ceased functioning while sampling and the boat had to be beached at the north end of Fallen Leaf Lake. The boat was not safely recoverable until after a storm had passed and the bottom of the hull sustained damage from the rocky substrate. Contractor shall replace the fuel pump in the motor, repair the gel coat on the hull of the boat, and service the boat as part of a yearly inspection for maintenance and upkeep to ensure the boat operates properly and efficiently.
2. DEFINITIONS:
1- Gel Coat- a material used to provide a high-quality finish on the visible surface of a fiber-reinforced composite such as a boat hull.
2- Fuel pump - a mechanical/electric device that delivers fuel to the cylinders or injectors of a motor.
3. SCOPE: The following components are to be installed in the motor and onto the hull.
The following is a list of components and procedures that will be required for the repair and maintenance.
1- Transport boat from Lahontan National Fish Hatchery to contractor repair facility.
2- Boat maintenance and inspection (including but not limited to oil changes, filter replacements, checking fluid levels, spark plugs, battery, and wiring inspections).
3- Install new fuel pump.
4- Test fuel pump and motor operation.
5- Remove boat from trailer.
6- Grind and prep hull bottom chips.
7- Mix new Gel coat and fill chips.
8- Sand and clean hull repair.
9- Put boat back onto trailer.
10- Transport boat from contractor repair facility to Lahontan National Fish Hatchery.
4. PLACE/DELIVERY AND PERIOD OF PERFORMANCE: Repair and maintenance shall be performed at a boat repair shop. Period of performance: 10/01/2024 -11/30/2024
5. Contractor shall pickup vessel from Lahontan National Fish Hatchery to repair and perform maintenance. Contractor shall deliver to Lahontan National Fish Hatchery after completion of repair and maintenance.
6. INSPECTION AND ACCEPTANCE: All work will be inspected by the technical coordinator to ensure required work is completed and boat, motor and hull are functioning properly.
7. GOVERNMENT FURNISHED EQUIPMENT OR
MATERIALS/INFORMATION: The Government will not provide any equipment or materials for this requirement.
8. TECHNICAL COORDINATOR: Amanda George
516-503-0676
Amanda_George@fws.gov mailto:Amanda_George@fws.gov
File details come from the government source that posted it. Updated .