A04_RFQ_SOW.pdf

Minnesota Valley NWR – Rapids lake Shop

Automotive Lift

15852 Rapids Lake Road Carver, MN

Rapids Lake Shop Facility

Automotive lift Installation

PART 1 GENERAL

1.01 SECTION INCLUDES

A. 2-post above-ground lift with 20,000 lb capacity

B. Install 2-post lift in existing bay

C. Startup and place into service, including electrical

D. Partial decommission and cement cap of existing SmartLift

1.02 SUBMITTALS

A. See Section 01 3000 Submittals for submittal procedures.

B. Shop Drawings: Indicate opening dimensions and required tolerances, connection details, anchorage spacing, hardware locations, and installation details.

C. Product Data: Show component construction, anchorage method, and hardware.

D. Manufacturer's Installation Instructions: Include any special procedures required by project conditions.

E. Operation Data: Include normal operation, troubleshooting, and adjusting.

F. Maintenance Data: any recommended maintenance and inspection frequency.

G. Specimen warranty.

1.03 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in manufacturing the products specified in this section with minimum three years of documented experience.

B. Installer Qualifications: Company specializing in performing work of type specified and with at least three years documented experience. Must be an authorized installer.

C. Comply with applicable code.

D. Products Requiring Electrical Connection: Listed and classified by ITS (DIR), UL (DIR), or testing firm acceptable to authorities having jurisdiction, as suitable for purpose specified.

1.04 WARRANTY

A. Extended Correction Period: Correct defective work within a 2-year period commencing on Date of Substantial Completion.

B. Manufacturer Warranty: LIFT WARRANTY

5-Years Structural / * 2-Years Part Components / 1-Year Labor

PART 2 PRODUCTS

2.01 MANUFACTURERS

A. Lift

1. Rotary Sp020-TA Lift, Symmetric “Double S” 8-Bend Columns, Adjustable 15’-0” to 16’-6” Overall Height, Adjustable 12’-11, 13’-5” or 13’-11” Overall Width (Widest is Needed for Servicing Cars), Patented 3-Stage TRIO™ Arms, Single-Point Air Lock Release, Truck Adapters and Extensions, ALI/ETL, GOLD Safety Certified. Powder Coated Blue.

(SPO20N0T0-BL)

2. Or an approved equal

B. Car Lift Polymer adaptor:

1. 1 FJ71016-1KIT Round Polymer Adapters for Lifting Cars, Kit of 4

2. Or an approved equal..

Minnesota Valley NWR – Shop facility

Automotive lift

2.02 Lift

A. Lift, Symmetric “Double S” 8-Bend Columns, Adjustable 15’-0” to 16’-6” Overall Height, Adjustable 12’-11, 13’-5” or 13’-11” Overall Width (Widest is Needed for Servicing Cars), Patented 3-Stage TRIO™ Arms, Single-Point Air Lock Release, Truck Adapters and Extensions, ALI/ETL, GOLD Safety Certified. Powder Coated Blue. (SPO20N0T0-BL)

Lifting Capacity

20,000 lbs. (9072kg)

Max. Load (per arm)

5,000 lbs. (2268kg)

A. Rise° Min.Truck Adapter Height/ Max.Truck Adapter Height: 77 31/32” (1979mm)/80 1/32” (2035mm)

B. Height Overall: Standard Adjustments

C. Width Overall (outside to outside of base plates) Narrow/Standard/Wide

12’ 11” (3937mm)/13’ 5” (4089mm)/13’ 11” (4242mm)

D. Floor To Overhead Switch 15’ 10 13/16” (4851mm)

E. Reach / Front Arm Min./Max. 34 11/16” (881mm) / 64” (1626mm)

F. Reach / Rear Arm Min./Max. 34 11/16” (881mm) / 64” (1626mm)

G. Min./Max.Truck Adapter Height 5 31/32” to 8 1/32” (152-203mm)

H. Min./Max.Low Step Height 10 31/32”to 13 1/32” (278-344mm)

I. Min./Max.High Step Height 15 31/32”to 18 1/32 (406-470mm)

K.Time of Descent 20 seconds for all vehicles

Ceiling Height Required: Standard

Total Product Weight 3,500 lbs.

2. 02a

A. Car Lift adaptor Round Polymer Adapters for Lifting Cars, Kit of 4 (Derates the lift to 11,000 Pound Capacity when in use).

2.03 COMPONENTS

A. Symmetric Lift Column

B. Surface Mounted

C. 3 stage trio arms

D. Automatic Arm restraints

E. Single point air lock release

F. Multi-position locking systems

G. Original single piece Double-S column construction

H. Hydraulic cylinders in each column

I. Overhead cables/clear floor design

J. Overhead padded switch bar

K. Multi-position wheel spotting Dish

L. Order Air/Electric Utility Box Mounted on Column (FA5910)

M. Order a (Set of 2) Column Mounted Door Defenders (N823)

N. Order a (Set of 2) Column Mounted “Wheel Wings” (FA5974)

Minnesota Valley NWR – Shop facility

Automotive lift

2.04 MATERIALS

A. 2-post above-ground lift with 20,000 pound capacity

B. Round polymer adaptors for lifting cars, set of 4

C. Partial decommission and cement cap of existing smartlift

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that wall openings are ready to receive work and opening dimensions and tolerances are within specified limits.

B. Verify that electric power is available and of the correct characteristics.

3.02 PREPARATION

A. Partial decommission and cement cap of existing smartlift

3.03 INSTALLATION

A. Install newly purchase 2-post lift in same bay as decommissioned lift

B. Startup and place into service.

3.04 ADJUSTING

A. If EQ cables stretch in first weeks, adjustments included.

3.06 CLEANING

A. Clean newly installed lift

B. Remove temporary labels and visible markings.

3.07 PROTECTION

A. Protect installed products from damage until Date of Substantial Completion.

B. Do not permit construction traffic through lift area until after acceptance.

END OF SECTION