A04 Redacted SOW Rev 1301418413.pdf

STATEMENT OF WORK

FOR

MK68 SPARE AND REPAIR PARTS FABRICATION

15 October 2026

1.0 SCOPE

The Naval Surface Warfare Center Panama City Division (NSWC PCD) has a requirement for the acquisition and fabrication of spare and repair parts for the MK68 System. The contractor shall provide all materials, facilities, and personnel to accomplish all tasks specified below.

2.0 APPLICABLE DOCUMENTS

The following documents of the exact issue form a part of this SOW to the extent specified herein. In the event of conflict between the documents referenced and the contents of this Statement of Work, the contents of this

Statement of Work shall take precedence. Second tier and lower reference documents (i.e., those referenced in the primary references) shall be used for guidance only.

2.1 Military Standards

None

2.2 Military Specifications

None

2.3 Other Documents

a) Drawing 9007920 Bore Rod Gag Pin Lanyard Assembly

b) Drawing 8905617 Gag Pin Lanyard Sub Assembly

c) Drawing 8905618 Lanyard Tube Assembly

d) Drawing 8719611 Gag Pin, Bore Rod

e) Drawing 8719610 Thimble, Gag Pin

f) Drawing 8719612 Fusible Link

g) Drawing 8719642 Cap, Lanyard

h) Drawing 9008064 Hook Strap

i) Drawing 8719728 Cap, Upper, Lanyard Tube

j) Drawing 8719730 Lanyard Tube

k) Drawing 8724809 Tube Mount, Lower

l) Drawing 8905619 Cap, Lower, Lanyard Tube

m) Drawing 8905621 Tube Mount, Upper

n) Drawing 8905625 Housing, Control, Underwater Mine EX 1 MOD 0

o) Drawing 8905627 TIM Assembly

p) Drawing 8905630 MK 68 MOD 1 TDD Adapter Harness

q) Drawing 6665799 Housing Adapter MK 157

r) Drawing 8905629 TIM CCA

s) Drawing 8905628 TIM Housing

t) Drawing 9007929 Schematic, TIM

u) Drawing 9007930 PCB, TIM

v) Drawing 6665905 Connector, D-Subminiature, 3-Pin

w) Drawing 8873713 MK 68 MOD 1 Thermal Battery Connector Assembly

x) Drawing 8748827 Shorting Plug, Thermal Battery

y) Drawing 8905593 End Cap, MOD1

z) Drawing 8905606 Muzzle Cap, MOD1

aa) Drawing 8719603 Bore Rod Cap Assemblies

bb) Drawing 8719605 Bore Rod Cap Cylinder

cc) Drawing 8718612 Fusible Link

3.0 REQUIREMENTS

3.1 Fabrication Support

The contractor shall fabricate and assemble the items specified below in the quantities specified below.

The contractor shall conduct testing and inspection to ensure, when fielded, the components meet the requirements of the drawings provided. The test results shall be documented in a report and submitted to the Government.

(CDRL A001). Each item delivered shall have an attached certificate of compliance certifying that all items furnished in the contract are in full compliance with all specifications and contract requirements. (CDRL A002)

3.1.1 Bore Rod Gag Pin Lanyard Assembly

The contractor shall fabricate, assemble and deliver six (6) Bore Rod Gag Pin Lanyard Assemblies in accordance with drawing 9007920. The 9007920 assembly consists of two assemblies (8905617 & 8905618). The

8905617 (Gag Pin Lanyard Sub Assembly) consists of the one Lanyard Cap (8719642, one Gag Pin Thimble

(8719610) and one Fusible Link (8718612). Each 8905617 shall for one Fusible Link and the contractor shall delivery an additional six (6) Fusible Links for internal government screening. Both sets of Fusible Link must be from the same lot. The 8905618 (Lanyard Tube Assembly) consists of one Lanyard Tube Upper Cap (8719728), one

Lanyard Tube (8719730), one Lower Tube Mount (8724809), one Lanyard Tube Lower Cap (8905619) and one

Upper Tube Mount (8905621). Additionally, the contractor shall provide six (6) Bore Rod Cap Assemblies

(8719603). The 8719603 assembly consists of one Bore Cap (8719606) and one Bore Rod Cap Cylinder (8719605).

3.1.2 Gag Pin Lanyard Sub-Assembly

The contractor shall fabricate, assemble and deliver thirty (30) Gag Pin Lanyard Sub-Assemblies in accordance with drawing 8905617. The 8905617 (Gag Pin Lanyard Sub Assembly) consists of the one Lanyard Cap

(8719642, one Gag Pin Thimble (8719610) and one Fusible Link (8718612).

3.1.3 Muzzle Cap

The contractor shall fabricate and deliver four (4) Muzzle Caps in accordance with drawing

8905606.

3.1.4 End Cap

The contractor shall fabricate and deliver four (4) End Caps in accordance with drawing 8905593.

3.1.5 Housing, Control, Underwater Mine EX 1, MOD 0

The contractor shall fabricate, assemble, and deliver six (6) Housing, Control, Underwater Mine

EX 1 MOD 0 Assemblies in accordance with drawing 8905625. The 8905625 assembly consists of two assemblies

(8905627 and 8905630) The 8905627 (TIM Assembly) consists of one TIM CCA (8905629), one TIM Interface

Plate (8905628). The 8905630 (MK 68 MOD 1 TDD Adapter Harness) assembly consists of one Connector, D-

Subminiature, 3-Pin (6665905). Additionally, the contractor shall provide one (1) Housing Adapter MK 157

(6665977).

3.1.6 MK 68 MOD 1 Thermal Battery Connector Assembly

The contractor shall fabricate, assemble, and deliver four (4) MK 68 MOD 1 Thermal Battery

Connector Assemblies in accordance with drawing 8873713. The 8873713 assembly consists of one (1) Shorting

Plug, Thermal Battery (8748827).

3.2 Marking, Packing, and Shipping

All marking, packing, and shipping shall be in accordance with NAVSEA D-247-H005 MARKING AND

PACKING LIST(S) – ALTERNATE I (NAVSEA) (OCT 2018)

3.3 Monthly Status Report

The contractor shall prepare a monthly status report that documents the status of the contractor’s effort towards achieving contract objectives. The report shall identify accomplishments to date and difficulties encountered, and compare the status achieved to planned goals and the resources expended. (CDRL A003)

4.0 GOVERNMENT FURNISHED INFORMATION (GFI)

GFI in the form of the documents listed in SOW paragraph 2.3 will be provided with the Request for Quote

(RFQ). Any additional GFI in the form of replacement parts will be provided within five days after formal request by the contractor, providing that parts are on site (NSWC PCD).

5.0 DELIVERIES

5.1 Hardware Deliverables

Partial deliveries authorized in accordance with mutual agreed upon schedules. All items in the quantities listed in SOW paragraph 3.1 shall be delivered no later than 180 days after award of purchase order. All items shall be delivered to Naval Surface Warfare Center Panama City Division, 110 Vernon Avenue Panama City Florida

32407. REDACTED

5.2 Data Deliverables

All data deliverables shall be submitted in accordance with the attached DD Form 1423.

6.0 PERIOD OF PERFORMANCE

The period of performance for this task shall be from date of award until 180 days after purchase order award.

7.0 SECURITY

This is an unclassified effort.

7.1 Release of Information

(a) Release of information shall be in accordance with Section I, Defense Federal

Acquisition Regulation Supplement (DFARS) Clause 252.204-7000, Disclosure of

Information.

(b) All technical data provided to the Contractor by the Government will be protected from public disclosure in accordance with the markings contained thereon. All other information relating to the items to be delivered or services to be performed under this contract may not be disclosed by any means without prior approval of the appropriate

NSWC PCD authority. Dissemination or public disclosure includes, but is not limited to, permitting access to such information by foreign nationals or by any other person or entity; publication of technical or scientific papers; advertising; or any other proposed public release. The Contractor shall provide adequate physical protection to such information to preclude access by any person or entity not authorized such access by the

Government.

7.2 Controlled Unclassified Information (CUI)

Controlled unclassified information (CUI) is official information that requires the application of controls and protective measures for a variety of reasons and has not been approved for public release, to include technical information, proprietary data, information requiring protection under the Privacy Act of 1974, and Government-developed privileged information involving the award of contracts. CUI is a categorical designation that refers to unclassified information that does not meet the standards for National Security Classification under Executive Order

13526, but is (a) pertinent to the national interest of the United States or to the important interests of entities outside the Federal Government, and (b) under law or policy requires protection from unauthorized disclosure, special handling safeguards, or prescribed limits on exchange or dissemination.

7.3 Minimum Requirements for Access to Controlled Unclassified Information (CUI)

Access to CUI, user level access to DON or DoW networks and information systems, system security and network defense systems, and to system resources providing visual access and/or ability to input, delete or otherwise manipulate sensitive information without controls to identify and deny sensitive information, requires security clearance eligibility, based on a Tier 3 Background Investigation, and a favorable adjudication by the DCSA Trust

Decision (Adjudications) [TD(A)], or Interim/Temporary access to CUI based on a determination by the NSWC

PCD Security Manager based on a favorable review of an individuals completed Electronic Questionnaire for

Investigation Processing (SF86), and favorable FBI fingerprint results. Contact NSWC PCD Personnel Security

(NSWCPCD_PERSEC@us.navy.mil) for initiation of the SF86 and FBI fingerprinting, the CUI determination, and validation that employees have the required eligibility, prior to providing access to CUI.

7.4 Minimum Protection Requirements for Controlled Unclassified Information

Security classification guides and unclassified limited documents (e.g., For CUI, Distribution Statement

Controlled) are not authorized for public release and, therefore, cannot be posted on a publicly accessible webserver or transmitted over the Internet unless appropriately encrypted.

7.5 CUI

CUI is a document designation, not a classification. This designation is used by Department of War (DoW) and a number of other federal agencies to identify information or material, which although unclassified, disclosure to the public of the information would reasonably be expected to cause a foreseeable harm to an interest protected by one or more provisions of the Freedom of Information Act (FOIA). This includes information that qualifies for protection pursuant to the provisions of the Privacy Act of 1974, as amended. CUI must be marked, controlled and safeguarded in accordance with DoDM 520048 Controlled Unclassified Information (CUI).

7.6 Security of Unclassified DoW Information on Non-DoW Information Systems (DoDI

8582.01) DoW Policy

Adequate security shall be provided for all unclassified DoW information on non-DoW information systems. Appropriate requirements shall be incorporated into all contracts, grants, and other legal agreements with non-DoW entities.

Information Safeguards are applicable to unclassified DoW information in the possession or control of non-

DoW entities on non-DoW information systems, to the extent provided by the applicable contract, grant, or other legal agreement with the DoW.

Unclassified DoW information that has not been cleared for public release may be disseminated by the

Contractor, grantee, or awardee to the extent required to further the contract, grant, or agreement objectives, provided that the information is disseminated within the scope of assigned duties and with a clear expectation that confidentiality will be preserved. Examples include:

(a) Non-public information provided to a Contractor (e.g., with a request for proposal).

mailto:NSWCPCD_PERSEC@us.navy.mil

(b) Information developed during the course of a contract, grant, or other legal agreement (e.g., draft documents, reports, or briefings and deliverables).

(c) Privileged information contained in transactions (e.g., privileged contract information, program schedules, contract-related event tracking).

It is recognized that adequate security will vary depending on the nature and sensitivity of the information on any given non-DoW information system. However, all unclassified DoW information in the possession or control of non-DoW entities on non-DoW information systems shall minimally be safeguarded as follows:

(a) Do not process unclassified DoW information on publicly available computers (e.g., those available for use by the general public in kiosks or hotel business centers).

(b) Protect unclassified DoW information by at least one physical or electronic barrier (e.g., locked container or room, logical authentication or logon procedure) when not under direct individual control of an authorized user.

(c) At a minimum, overwrite media that have been used to process unclassified DoW information before external release or disposal.

(d) Encrypt all information that has been identified as CUI when it is stored on mobile computing devices such as laptops and personal digital assistants, compact disks, or authorized removable storage media such as thumb drives and compact disks, using the best encryption technology available to the Contractor or teaming partner.

(e) Limit transfer of unclassified DoW information to subcontractors or teaming partners with a need to know and obtain a commitment from them to protect the information they receive to at least the same level of protection as that specified in the contract or other written agreement.

(f) Transmit e-mail, text messages, and similar communications containing unclassified DoW information using technology and processes that provide the best level of privacy available, given facilities, conditions, and environment. Examples of recommended technologies or processes include closed networks, virtual private networks, public key-enabled encryption, and transport layer security.

(g) Encrypt organizational wireless connections and use encrypted wireless connections where available when traveling. If encrypted wireless is not available, encrypt document files (e.g., spreadsheet and word processing files), using at least application-provided password protected level encryption.

(h) Transmit voice and fax transmissions only when there is a reasonable assurance that access is limited to authorized recipients.

(i) Do not post unclassified DoW information to website pages that are publicly available or have access limited only by domain or Internet protocol restriction. Such information may be posted to website pages that control access by user identification and password, user certificates, or other technical means and provide protection via use of transport layer security or other equivalent technologies during transmission. Access control may be provided by the intranet (vice the website itself or the application it hosts).

(j) Provide protection against computer network intrusions and data exfiltration, minimally including:

(1) Current and regularly updated malware protection services, e.g., anti-virus, anti-spyware.

(2) Monitoring and control of both inbound and outbound network traffic (e.g., at the external boundary, sub-networks, individual hosts), including blocking unauthorized ingress, egress, and exfiltration through technologies such as firewalls and router policies, intrusion prevention or detection services, and host-based security services. Prompt application of security-relevant software patches, service packs, and hot fixes.

(k) Comply with other current Federal and DoW information protection and reporting requirements for specified categories of information (e.g., medical, proprietary, Critical Program Information

(CPI), personally identifiable information, export controlled) as specified in contracts, grants, and other legal agreements.

(l) Report loss or unauthorized disclosure of unclassified DoW information in accordance with contract, grant, or other legal agreement requirements and mechanisms.

(m) Do not use external IT services (e.g., e-mail, content hosting, database, document processing) unless they provide at least the same level of protection as that specified in the contract or other written agreement.

7.7 Operations Security

Operations Security (OPSEC) is concerned with the protection of critical information: facts about intentions, capabilities, operations, or activities that are needed by adversaries or competitors to bring about failure or unacceptable consequences of mission accomplishment.

Critical information includes information regarding:

• Operations, missions, and exercises, test schedules or locations;

• Location/movement of sensitive information, equipment, or facilities;

• Force structure and readiness (e.g., recall rosters);

• Capabilities, vulnerabilities, limitations, security weaknesses;

• Intrusions/attacks of DoW networks or information systems;

• Network (and system) user identifications and passwords;

• Movements of key personnel or visitors (itineraries, agendas, etc.); and

• Security classification of equipment, systems, operations, etc.

The Contractor, subcontractors and their personnel shall employ the following countermeasures to mitigate the susceptibility of critical information to exploitation, when applicable:

• Practice OPSEC and facilitate OPSEC awareness;

• Immediately retrieve documents from printers assessable by the public;

• Shred sensitive and Controlled Unclassified Information (CUI) documents when no longer needed;

• Protect information from personnel without a need-to-know;

• When promulgating information, limit details to that essential for legitimacy;

During testing and evaluation, practice OPSEC methodologies of staging out of sight, desensitization, or speed of execution, whenever possible.

8.0 DISTRIBUTION LIMITATION STATEMENT

Technical documents provided under this contract carry the following distribution limitation statement and shall be handled accordingly.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE AND U. S. DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY. OTHER

U.S. REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, NAVAL SURFACE

WARFARE CENTER PANAMA CITY DIVISION, REDACTED.

DESTRUCTION NOTICE - FOR CLASSIFIED DOCUMENTS, FOLLOW PROCEDURES IN

DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL,

CHAPTER 5, SECTION 7 OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM

REGULATION. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION

OF THE DOCUMENT.