A04.01 PWS_TARGET ROCK D-4234 EVO VALVES REV 1.doc.pdf

STATEMENT OF WORK (SOW)

FOR

OVERHAUL OF TARGET ROCK D-4234 EVO VALVES

1.0 BACKGROUND.

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS&IMF), TRF Bangor, in support of a NIMITZ class aircraft carrier requires Original Equipment Manufacturer (OEM) to provide

Subject Matter Expert (SME) for technical support and all required parts to assist PSNS & IMF and Ship’s

Force to overhaul nineteen JP-5 system Target Rock valves.

1.1 SCOPE:

1.1.1 Contractor will provide subject matter experts (SME) onsite at Puget Sound Naval

Shipyard and Intermediate Maintenance Facility (PSNS&IMF) knowledgeable on the design and function of Target Rock D-4234 EVO valves.

1.1.2 SME provide technical support to assist PSNS&IMF and Ships Force overhaul three (3)

5”x 6” and sixteen (16) 5”x 8” JP-5 system Target Rock EVO Valves.

2.0 REFERENCES

2.1. TM S6435-ZA-MMM-010 “JP-5 Electric Valve Operator (EVO) - Various sizes

3.0 REQUIREMENTS:

3.1 Location of Work: PSNS & IMF, Bremerton, WA., BLDG 431.

3.2 Period of Performance: See Contract

3.3 The Original Equipment Manufacturer (OEM) shall provide all necessary materials, travel, and technical representatives to perform the required overhaul.

3.4 Planning, supervising, or performing nuclear work is not authorized without the express approval of

Code 105, Code 300N, Code 1200N, and Code 230

3.5 Attend an arrival and safety brief with Project Team and Contracting Officer’s Representative

(COR), for all contractor and subcontractor employees, upon arrival.

3.6 Coordinate delivery and shipment of Contractor equipment and supplies with the COR:

Government Delivery and Shipping Address:

PUGET SOUND NAVAL SHIPYARD & IMF

1400 FARRAGUT AVENUE, BLDG 514

SHIPPING & RECEIVING

BREMERTON, WA 98314-5001

ATTN: CVN-71 Project Team

3.7 Security Requirements:

3.7.1 Contractor employees are required to have an individual identification badge as well as one (1) of the four (4) credentials listed below in their possession to gain access to job sites:

3.7.1.1 Common Access Card (CAC):

3.7.1.1.1 Contractors who have a need to access a government computer system may be eligible for a contractor CAC; most contractors are not eligible for a CAC. Contact the Contracting Officer’s Representative (COR) or Contracting Officer’s Security Officer for assistance as needed.

3.7.1.2 Single Day Pass:

3.7.1.2.1 Visiting vendors/contractors requiring infrequent access may obtain daily passes directly from the individual Navy Installation by submitting identification credentials for verification and undergoing a criminal screening/background check. A new pass is required to gain access each day. Passes are issued by Naval Base Kitsap (NBK). The

Federal Bureau of Investigation’s (FBI) National Crime Information

Center (NCIC) criminal database and FBI Terrorist Watch List will be checked daily prior to entry. In addition, NBK must check the Navy’s

Consolidated Law Enforcement Operations Center (CLEOC) database to ensure an unescorted visitor has no objectionable criminal record, is not on the Terrorist Watch List and has not been previously debarred from entry onto any Navy Installation.

3.7.1.3 Defense Biometric Identification System (DBIDS) Program: Commander, Navy

Installations Command (CNIC) has established the Defense Biometric

Identification System (DBIDS) for access control to CNIC Installations via Entry

Control Points (ECP). DBIDS is an enterprise identity management and perimeter installation access control solution in which Contractor personnel who enroll, and are approved, are subsequently granted access to the installation for a period up to three years, or the length of the contract, whichever is less, and are not required to obtain a new pass from the Base Pass and Identification Office for each visit. There are no fees associated with obtaining a DBIDS credential.

3.7.1.3.1 The Government performs background screening and credentialing.

Throughout the year the Contractor employee must continue to meet background screening standards. Periodic background screenings are conducted to verify continued DBIDS participation and installation access privileges. DBIDS access privileges will be immediately suspended or revoked if at any time a Contractor employee becomes ineligible.

3.7.1.3.2 Access to Installation. All Contractor personnel shall obtain access to the installation through enrollment and registration into the (DBIDS).

The Contractor shall provide the Contracting Officer with the name of their designated Service Contractor Administrator (SCA) for enrollment in DBIDS. Contact the (COR) or Contracting Officer’s

Security Officer for assistance as needed. Once enrolled, the

Contractor must provide the DBIDS Registrar with an approved employee list and then direct their employees to register into DBIDS.

3.7.1.3.3 DBIDS Credentials. Contractor employees shall furnish a completed copy of the SECNAV 5512/1 form to obtain the required background check and visit the local Navy Installation Visitor Control Center to obtain a DBIDS credential once approved. The SECNAV 5512/1 form and additional information about DBIDS can be found at:

https://www.cnic.navy.mil/om/dbids.html.

3.7.1.3.4 The Contractor may initiate the adjudication process when a background screen failure results in disqualification from participation in DBIDS and the Contractor employees do not agree with the reason for disqualification. The Contractor may also apply for a waiver when a background screening failure results in disqualification from participation in DBIDS. The Commanding Officer will be the final waiver determination authority.

3.7.1.3.5 The Contractor shall immediately collect employee DBIDS credentials and notify the Contracting Officer in writing:

3.7.1.3.5.1 That an employee has departed the company without having properly returned or surrendered their DBIDS credentials.

3.7.1.3.5.2 That there is a reasonable basis to conclude that an employee, or former employee, might pose a risk, compromise, or threat to the safety or security of the installation or anyone therein.

3.7.1.3.6 DBIDS Paper Passes. In the event that a visitor, vendor, or Contractor employee elects not to participate in DBIDS, the individual will be issued DBIDS paper pass from the Base Pass and Identification Office in order to access to the installation. The time standard for the validity of a pass to access an installation will be not more than thirty (30) days and may be further restricted based on local policy or by Federal, DOD, Navy, and CNIC guidance. The Government will not be responsible for any cost or lost time associated with obtaining paper passes or added vetting or inspections incurred by non-participants in the DBIDS credentialing process.

3.7.2 Coordinate all contractor employee badging and security issues via the Government representative: Christina Tobin, Christina.tobin@navy.mil , 360-627-3358 and the (COR).

https://www.cnic.navy.mil/om/dbids.html mailto:Christina.tobin@navy.mil

3.7.3 Computers in the PSNS & IMF CIA:

3.7.3.1 Contractor owned computers must be inspected by Code 109 prior to bringing them into the CIA and shall have a PSNS&IMF AIS Security Survey for Visitor

Computer Equipment Form PSNS&IMF 5239/49 (Rev. 9-2020), approved by

Code 109, on site at all times.

3.7.4 Contractor Employees shall adhere to PSNS&IMF NOTICE 5239.6B PORTABLE

ELECTRONIC DEVICE (PED) GUIDANCE.

3.7.4.1 Lap-top Computers and/or cell phones equipped with cameras are STRICTLY

PROHIBITED inside all PSNS & IMF owned or controlled spaces or property

(the CIA, DMF & YOKO Enclaves, etc.) and are subject to seizure by Installation

Police and Shipyard Security Personnel.

3.7.4.2 ALL portable electronic devices are STRICTLY PROHIBITED onboard submarines (e.g. phones, mp3 devices, computing devices, recording equipment, removable storage media, etc.).

3.8 Safety

3.8.1 Safety -Mishap Notification and Investigation: Notify (via telephone) the cognizant COR, and project within four hours of all contractor mishaps or incidents. If requested by the cognizant COR, and/or Project the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records until released by the investigating safety office. Cooperate, if the Government investigates the mishap, and assist the Government personnel until the investigation is completed.

3.8.2 Ensure employees understand fire safety requirements and actions taken when a fire or emergency occurs during work onboard the ship.

3.8.3 Ensure that personnel mark their areas shipboard for hazards created, using the local

Hazardous Area/Personal Protective Equipment (PPE) required signs. Signs are to be placed, at all entrances to the industrial work areas. Typical hazards are overhead work, rigging lifts, grinding, and welding, banding and electrical hazard.

3.9 General Practices:

3.9.1 Good Hygiene/Self-Assessment:

3.9.1.1 Employees and contractors are encouraged to regularly wash hands for at least 20 seconds. Hand wash stations will be provided at worksite locations and near ship brows.

3.9.1.2 Hand sanitizer will be provided in work areas off hull where washing stations are not readily available and near ship brows.

3.9.1.3 All personnel will self screen daily, prior to boarding.

3.10 Government Representatives:

3.10.1 COR: Located within the contract.

3.11 Technical Requirements:

3.11.1 Perform the following overhauls:

3.11.1.1 Provide technical oversight to overhaul nineteen (19) Target Rock D-4234 EVO valves, IAW with OEM specifications and ref 2.1.

4.0 GOVERNMENT WILL PROVIDE

4.1 Services provided as listed below:

4.1.1 Provide removal/reinstallation of Target Rock D-4234 EVO valves.

4.2 Provide required HAZMAT for overhaul.

4.3 Disposal HAZWASTE.

5.0 CONTRACTOR FURNISHED MATERIALS

5.1

DEF-100639-48.REV.A PIN,SOLENOID,.37,1.18,17-4 14

100639-48.REV.BF PIN,SOL,.37,1.18,17-4 3

104564-1.REV.C WASHER TAB,304SS,.035, 19

104569-1.REV.D SPR,COMP,INC750,1.235ODAMS5699 19

206035-1.REV.D JP5-WA02 19

852-0012.REV.E VAL,INVS SHTL,LEE#AAVX0508100B 19

852-0013.REV.C VAL,SEL SHTL,LEE#SVSX0500900B 19

104718-1.REV.B PISTON SEAL, 5" 19

203561-19.REV.V RG,WEAR,5",MN DISC 19

301-0201.REV.- O'RG,PARKER,3-907,VITON,V74775 19

301-0109.REV.- O'RG,ARP568-012,VITON,V747-75 19

301-0200.REV.- O'RG,PARKER,3-906,VITON,V74775 19

301-0071.REV.- O'RG,ARP568-011,VITON,V747-75 19

440-0009.REV.- PIN,SPIROL,12,.87,300SS 19

205153-1.REV.A NN-MACHINE112 14

104570-1.REV.C SPRING 4/5" DISC ASSY 19

205152-1.REV.E DISC,ROD,4/5" 13

205156-1.REV.A DISC RETAINER 19

104625-1.REV.C PLUG,SNORKEL RESTRICTER 19

303705-1.REV.L SEAT,5",MON 3