A04.0 12777048 FF-S-86E 22Feb22.pdf
PDF 122 KB Posted
- Attached to
- CAPSCREW, FLT SKT HD
- Solicitation number
- N4523A22Q4028
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FF-S-86E
FEDERAL SPECIFICATION
(a) Title, number, and date of this specification:
Screw, Cap, Socket-head FF-S-86E dated 29 MAY 1987 and Amendment 4 dated 16 JAN 1991
(b) Type, material, size and length or standard part number (see 1.2):
Type: Type IV Material: 304 STAINLESS STEEL PER AMS-QQ-S-763 Size: 3/4 INCH Length: 1-1/2 INCHES Standard part number: NOT APPLICABLE
(c) Title, number and date including part number specified in accordance with military document (see 6.3):
Title: NOT APPLICABLE Number: NOT APPLICABLE Date & part number: NOT APPLICABLE
(d) Material certification, if required (see 3.1 and 4.3.4): NOT REQUIRED
(e) Protective coating or surface treatment, if required (see 3.3): PASSIVATE PER QQ-P-35.
(f) Cross drilling of cylindrical heads, if required (see 3.5.2): Not required
(g) Thread series and class (see 3.5.4.2):
Thread series: 10UNC Class: 3A
SPECIAL REQUIREMENTS:
SELF-LOCKING ELEMENT INSTALLED PER MIL-DTL-18240 – TYPE N ONLY
82 DEGREE COUNTERSUNK HEX SOCKET HEAD
HEADS SHALL BE MARKED WITH SIX DOTS, APPROXIMATELY 0.032 INCH DIAMETER, RAISED OR
DEPRESSED APPROXIMATELY 0.010 INCH
**CERTIFICATE OF COMPLIANCE REQUIRED**
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative Contracting Officer (ACO).
JOB ORDER
88MSM00001
KEY OP
KO ITEM
REV
IDN
1277-7048
IDN REV
2 PAGE 1 OF 1
2305.3 Form Rev 10/2017
File details come from the government source that posted it. Updated .