A04 DID Acceptance Test Report.pdf
PDF 22 KB Posted
- Attached to
- Ross Mixer Repair Federal contract opportunity
- Solicitation number
- N0016723Q0192
About this file
This document is a Data Item Description providing the format and content requirements for an Acceptance Test Report to be delivered under the federal contract opportunity for Ross Mixer Repair issued by the Department of the Navy Naval Sea Systems Command. The Acceptance Test Report must include test article identification and description, date and location of test, operator conducting the test, results including satisfactory and unsatisfactory objectives demonstrated, contractor conclusions and recommendations, and all supporting analysis and data sheets.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| A04 GFP DID.pdf | ||
| A04 CDRL A001_GFE - Ross Repair FY23.pdf | ||
| A04 CDRL A002_ATR - Ross Repair FY23.pdf | ||
| A03 SSJ - Ross Repair FY23_Redacted.pdf | ||
| N0016723Q0192 CSS.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: ACCEPTANCE TEST REPORT (ATR) Number: DI-QCIC-81891 Approval Date: 20130118 AMSC Number: N9313 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: AS/PMA251 Applicable Forms: N/A
Use/relationship:
The ATR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.
This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).
Requirements:
1. Format. Contractor’s format is acceptable.
2. Content. The ATR shall contain the following:
a. Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.
b. Date and location of test or evaluation.
c. The operator who conducted the test.
d. Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.
e. Contractor’s conclusions, corrective action anticipated, recommendation to correct. deficiencies, and suggested improvements based on evaluation of the test.
f. All analysis and supporting data.
g. All data sheets.
3. End of DI-QCIC-81891.
Source: http://assist.dla.mil -- Downloaded: 2022-02-09T20:21Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .