A02 - Statement of Work - Dredge Hurley Shackles and Winches.pdf

PDF 148 KB Posted

Attached to
DREDGE HURLEY SHACKLES AND WINCHES
Solicitation number
W912EQ22Q0053
Issued by

View the file

Other files

File Type Posted
B08 - Solicitation (W912EQ22Q0053).pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work

Dredge Hurley Shackles and Winches

Scope of Work The Dredge Hurley requires New Anchor Shackles and Winches.

1. 3.5” 120 TON SAFETY ANCHOR SHACKLE CROSBY G2130 or approve equal, QTY

10. Work Load Limit 120 Ton, galvanized finish, Safety Factor of 6.1.

2. Patterson Winch, or approved equal, WWP65E-12.5 PL, QTY 2. 480V 3 phase, Dog Holding Capacity of 130,000lbs, Brake Holding Capacity of 92,000lbs, Ultimate Shock Load of 130,000lbs.

3. Patterson Winch, or approved equal, WWP65E-12.5 PR, QTY 2. 480V 3 phase, Dog Holding Capacity of 130,000lbs, Brake Holding Capacity of 92,000lbs, Ultimate Shock Load of 130,000lbs.

Protection of Material and Work The Contractor shall comply with all reasonable requests of the government to enclose or specially protect such property. If, as determined by the COR, material, equipment, supplies, and work performed are not adequately protected by the Contractor, such property may be protected by the Government and the cost thereof may be charged to the Contractor or deducted from any payment due him.

Quality Assurance The Government will periodically evaluate the Contractor's performance by appointing a representative(s) to monitor performance. The COR or other government representative(s) will evaluate the contractor’s performance through intermittent on-site inspections.

Delivery

The Shackles and winches will be delivered to Ensley Engineering Yard 2915 Riverport Rd Memphis TN 38109

Deficiencies The Government will monitor the Contractor's performance under this contract using the following deficiency definitions or such other procedures as may be necessary to ascertain Contractor compliance with this contract.

• Failure to complete work during contract period is a deficiency.

• Damage to or loss of government property in the Contractor's possession is a deficiency.

• Damage to or loss of government property in the area where services are being performed is a deficiency.

• Damage to government facilities is a deficiency.

• Payment for this contract will be made upon the successful completion of work.

• Full payment will not be made for unsatisfactory performance. The Contracting Officer’s

Representative will determine whether performance is satisfactory.

Payment adjustments for performance deficiencies to the invoice may be based on actual Government costs for correcting deficiencies when the contractor cannot satisfy the terms of the contract.

Performance Period

The performance period will be 3 months from time of purchase.

Security Requirements All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection

Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

Protection of Material and Work
Quality Assurance
Delivery
Deficiencies
Performance Period
Security Requirements

File details come from the government source that posted it. Updated .