A02_Statement of Work_Circular Connector_ATC_12302035_20250625_Redacted.pdf
PDF 79 KB Posted
- Attached to
- Glenair Mighty Mouse Circular Connectors
- Solicitation number
- W91ZLK-25-Q-A010
About this file
This Statement of Work (SOW) details a procurement for 594 micro miniature circular connectors for the US Army Aberdeen Test Center's Automotive Instrumentation Division. The connectors are Series 801 "Mighty Mouse" plugs with seven different configurations and specific part numbers, including 801-007-16ZNU7-10SB (66 units), 801-007-16ZNU7-10PB (110 units), and five additional part number variations totaling 594 connectors. The procurement is intended to support automotive performance and endurance testing by providing connectors that interface signal sources to data acquisition systems, with requirements for appropriate size, electrical isolation, and environmental resistance.
The solicitation is a 100% Small Business Set-Aside under NAICS code 334419, with a Firm-Fixed Price contract anticipated. Delivery is expected 8 weeks after order receipt to 6850 Lanyard Road, Building 358, Aberdeen Proving Ground, MD 21005, with deliveries accepted Monday through Friday from 0800 to 1500. The government will use Lowest Price, Technically Acceptable (LPTA) source selection procedures, meaning the award will go to the lowest-priced offer that meets all technical specifications in the Statement of Work. Proposals are due by 1:00 PM EST on Friday, 11 July 2025, to be submitted via email to the Contract Specialist.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A03_Miscellaneous_Tech_Requirements_Redacted.docx | DOCX document | |
| A02_Justification_Circular Connector_ATC_12302035_20250617(KO Signed)r_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Circular Connector, Micro Miniature
Automotive Instrumentation Division, US Army Aberdeen Test Center (ATC)
1. Introduction: The contractor shall provide equipment necessary to support the ATC as defined in this Statement of Work (SOW). The fabrication of the equipment shall be conducted by the contractor to the specifications provided in the Technical Requirements document.
1.1 Background. The Automotive Instrumentation Division is responsible for the acquisition of engineering data during dynamic automotive operations to perform analysis of automotive performance and endurance of the system under test. To support the mission, the division requires cylindrical connectors that interface the signal sources to the data recorder. The connectors being procured will provide the appropriate size, ease of use, electrical isolation and environmental resistance in order that the signals are properly interfaced from source to data acquisition system. The equipment must also meet the electrical and physical interfacing specifications to be integrated with existing data acquisition equipment at ATC.
Objective. The objective of this contract is to acquire multiple micro miniature circular connectors that meet all the following requirements of this Statement of Work.
1.2 The contractor must possess the intellectual property to perform the manufacture the micro miniature circular connectors to the specifications listed in the Technical Requirements document. The contractor shall manufacture all connectors, shrink boots and banding clamps with quantities stated in the Technical Requirements document.
2. Applicable Documents:
2.1 Technical Requirements document, Micro Miniature Circular Connectors
3. Description of Services or Supplies:
Equipment manufacturer shall fabricate and ship to ATC a total of five-hundred ninety-four (594) micro miniature circular connectors in seven different configurations. The connectors are specified to interface directly to the ATC developed automotive on-board instrumentation systems. The cylindrical connectors that interface the signal sources to the data acquisition systems required to record engineering data during testing. The connectors shall be fabricated to meet or exceed the following specifications.
4. Requirements:
4.1 Items 001-007 Connector, Plug. Series 801 “Mighty Mouse”
Part numbers: 801-007-16ZNU7-10SB Qty: 66 801-007-16ZNU7-10PB Qty: 110
801-007-16ZNU8-13PB Qty: 22 801-007-16ZNU6-6SA Qty: 154
801-007-16ZNU8-13PC Qty: 44 801-007-16ZNU8-13PA Qty: 110 801-007-16ZNU6-6PA Qty: 88
5. Delivery Information Delivery is expected 8 weeks after receipt of order.
Delivery will be made to
6850 Lanyard Road, Bldg. 358, Aberdeen Proving Ground, MD
21005.
Deliveries are accepted from 0800 to 1500 Monday through Friday
File details come from the government source that posted it. Updated .