A02 SOW Tools and Shop Equip final.docx

MINNESOTA AIR NATIONAL GUARD

HEADQUARTERS 133RD AIRLIFT WING (AMC)

SAINT PAUL MINNESOTA

20 August 2024

STATEMENT OF WORK

3. General Scope: Require updated tools and equipment to replace old, worn out, and broken equipment currently being used. This is NOT Brand Name Specific or Brand Name or Equal. This list is to document what meets the Government’s minimum need.

a. Will conduct a Multiple Award Evaluation, so, partial quotes are acceptable.

b. Provide sufficient information and details to allow for a full and comprehensive evaluation of your quote.

4. Detailed Requirements:

a. Dual Evap / High Pressure Smoke Machine:

i. Qty: 1

ii. Capability to test low pressure EVAP systems

iii. Capability to test pressure Turbo systems

iv. Visual vapor producing fluid

v. Complete accessory packages for testing

b. Automotive Scan tool:

i. Qty: 1

ii. 12.9” Touch Screen

iii. 256G Memory

iv. VCI Interface with Updated J2534

v. Oscilloscope, multimeter, waveform generator, CAN BUS check capabilities

vi. Wi-Fi enabled

vii. Docking Station

viii. Carrying Case

c. Multipurpose Puller Set:

i. Qty: 1

ii. Tool control board w/ locking cabinet

iii. Includes bolt grip puller set

1. Two- and three-way yoke

2. 3 pressure screw tips

3. Assortment of SAE and Metric bolts

iv. Includes gear puller set

1. 6–10-ton capacity

v. Includes rear axle puller set

1. Slide hammer with attachments

vi. Interchangeable puller set

1. Three sets of jaws

d. Torque Multiplier:

i. Qty: 1

ii. ½ inch square input

iii. ¾ inch square output

iv. 740 ft-lbs. torque output

v. Quick change cranked reaction

e. Chassis/Engine Listening Device:

i. Qty:1

ii. Decibel meter

iii. Headphones

iv. 6 position control box

v. 6 microphone clamps

f. Wire Wheel Surface Cleaning Tool, Crud Thug

i. Qty 1

ii. Pneumatic

iii. 4-inch Wire Wheels

iv. Adjustable exhaust

v. Ergonomic grip

vi. Adjustable power/speed regulation

vii. Paddle style trigger

viii. 1 wire wheel

ix. 1 coarse wheel

g. Lubricant Dispensing Gun:

i. Qty: 14

ii. Compatible with oil and antifreeze

iii. Capable of up to 8 gpm flow rate

iv. Twist close nozzle

v. Flexible extension

h. Tool Box Foam

i. QTY 7

ii. Two layered foam with Black on top and red on bottom

iii. Exact Dimensions: 55 ¾” W x 25 ½” D

i. Tool Box Foam

i. QTY 36

ii. Two layered foam with black on top and red on bottom

iii. Exact Dimensions: 25 ½” W x 25 ½” D

j. Self-Closing Hazardous Locker:

i. Qty: 1

ii. Self-closing doors

iii. Double wall 18-gauge steel

iv. 350 lb. shelf capacity

v. Exact dimensions 43” W x 18” D x 65” H

vi. Yellow

k. Vacuum Hand Pump:

i. Qty: 1

ii. Handheld automotive vacuum pump

iii. 4.5 oz fluid reservoir

iv. Tapered manifold plugs

v. Bleed screw adapters

vi. Vacuum line adapters

vii. Master cylinder refill kit

viii. Case

l. 5-Ton Floor Jack:

i. Qty: 2

ii. 17” travel length

iii. Air/Hydraulic operation

iv. Heavy duty

v. 5-ton weight capacity

m. 20-Ton Floor Jack:

i. Qty: 2

ii. 24” travel length

iii. Air/Hydraulic operation

iv. Heavy duty

v. 20-ton weight capacity

n. Rechargeable LED Under hood Work Light:

i. Qty: 3

ii. Magnet or hook mounting

iii. Spring loaded carrier extension to 77 inches

o. Sure Shot Brake Clean Cans, 32 oz

i. Qty 1

ii. Pneumatic

iii. 4-inch Wire Wheels

iv. Adjustable exhaust

v. Ergonomic grip

vi. Adjustable power/speed regulation

vii. Paddle style trigger

p. Extension Cord Reel:

i. Qty: 8

ii. 12 Gauge 45 ft Wire

iii. 120 Volt

iv. 15 Amp

v. Triple outlet

vi. Self-retracting reel

q. Single Hose Reel:

i. Qty: 2

ii. I.D. 3/8 inch

iii. O.D. 5/8 inch

iv. 50 ft long hose included

v. 300 psi max pressure

r. Dual Hose Reel:

i. Qty: 3

ii. I.D. 3/8 inch

iii. O.D. 5/8 inch

iv. Two 50 ft long hose included

v. 300 psi max pressure

s. Cooling System Tester Filler:

i. Qty: 1

ii. Pressure and vacuum test capabilities

iii. Adaptors for most modern vehicles

iv. Hand pump and gauge

v. Quick connect adaptors

5. Warranty: All materials shall be warranted to be in compliance with this statement of work and to the highest standards of the industry. Minimum warranty of 1 year.

Refer technical questions and information to:

Lt Col Ann Feist Contracting Officer 610 Militia Drive St. Paul, MN 55111 612-713-2612 ann.feist.1@us.af.mil image1.png