A02 SOW Security Forces Trucks FINAL.docx

MINNESOTA AIR NATIONAL GUARD

HEADQUARTERS 133RD AIRLIFT WING (AMC)

SAINT PAUL MINNESOTA

08 Sep 2023

STATEMENT OF WORK

1. Project Title: Security Forces Police Truck Accessory Upgrades

640 Hercules Avenue St Paul, MN 55111

3. General Scope: The Vendor shall provide the following equipment with installation on four 133rd Security Forces Police Trucks; Ford F-150s. All equipment provided must fit the existing 2020 Ford F-150 crew cab police trucks.

4. Detailed Requirements:

A. In-Bed 2-Drawer Storage System (Qty. 4 each)

· Aluminum pickup trucks with a bed length of 5'6"

a. Weight Capacities:

a. Payload of 1500 lb or greater

b. Payload 150 lb or greater per drawer

b. System Dimensions:

a. Not to exceed a length of 64.54"

b. Not to exceed a width of 63"-71"

c. Not to exceed a height of 12"

c. Drawer Dimensions and Specifications:

a. full bed-length drawers

b. At least 18” width (bottom of drawer width may be less to fit truck bed)

c. Not to exceed a height of 9”

d. All weather; to include protection for extreme UV light and temperatures.

e. Drawer Handles

f. Wheels

g. Includes a drawer system lock with bolt on; two sets of keys per lock – Qty. 8 Each

h. Includes additional set of four wide drawer dividers. – Qty. 4 Each

B. Roll Up Pickup Truck Bed Tonneau Cover

a. Black in color

b. Features auto latching dual locking system which releases with a downward pull

c. Low profile design with no more than 1” rise

d. Rapid open/closing operation

e. Made from a textured, double-coated commercial grade reinforced vinyl

f. Nylon straps for stowing when rolled up

g. Water resistant with front and rear seals that form a tight barrier between the truck and cover, as well as the hook and latch fastening side seals

h. No drilling required for installation

i. Uses a clamp system to mount to the truck bed

C. Running Boards

a. Rectangular shaped

b. Not to exceed step width of 7”

c. Mounts with rocker panel mount

d. Made of aluminum material

e. Black in color with Black powder coat finish

f. Equipped with metal treads for maximum traction and safety

g. Smooth, rounded end caps

h. Stainless steel fastners

D. Running Board Emergency Lights

a. Mounts to the running board end caps

b. LED optics

c. Hard-coated lenses

d. Must be able to synchronize with existing Whelen sync products

e. Split color Red/Blue pattern

E. 2020 Ford F-150 Pedestal System Kit

a. Not to exceed a height of 26”

b. Not to exceed a width of 18”

c. Not to exceed a depth of 18”

d. Heavy gauge steel vehicle base that attaches to the passenger side seat studs

e. Lower tube that provides vertical clearance over the center console and the seat

f. Center upper pole must allow for close mounting to the dash

g. Features a locking slide arm that can rotate around 360°

h. Capabale of multiple locking points

i. Extendable and automatic locking

j. Tilting capabilities

k. Compatible with a VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole patterns.

l. Features a support brace

F. Vehicle Laptop Cradle Mount

a. Compatible with existing GETAC S410 laptop

b. Has at least 120W Auto Power Supply

c. No RF

d. RoHS Compliant

e. Crash Simulation per SAE J1455 Compliant (Forward/Rearward/Side Impact Directions)

f. Small footprint designed to maximize available space.

g. Rugged composite/steel construction with black powder coat finish for durability.

h. Screen support is included with the dock.

i. Includes a power supply bracket attaching the LIND power supply to bottom of the dock.

j. Side Passenger Floor Mount

G. Vehicle Radar Speed Detection System

a. Single-zone directional radar capable of monitoring front or rear targets

b. Direction sensing technology

c. Automatic same direction mode – No slow button

d. Voice verification of lock targets

e. Strongest & faster targets are simultaneously displayed and can be individually locked

f. True audio doppler tones

g. Track-thru lock

h. Detachable 3-window multi-colored LED display

i. Includes two RFI immune, waterproof, directional, digital Ka-Band antennas

j. Backlit, cordless infrared remote

k. CAN/VSS cable for power and VSS

l. Includes two antennas

m. Includes 25 MPH and 40 MPH tuning forks

n. Includes antenna dash/deck mounts

o. Includes approx. 4ft and 16ft antenna cables

p. Includes 2020 Ford F-150 combination dash mount kit for mounting the counting unit/display and antenna

q. Includes 2020 Ford F-150 rear antenna mount kit for mounting the rear antenna

r. Includes manufacturer’s warranty

s. Must provide training and certification for use of radar system

H. Installation

a. Vendor shall provide installation for all equipment provided in 4A.-4G.

5. Warranty: All materials shall be warranted to be in compliance with this statement of work and to the highest standards of the industry. Minimum warranty of 1 year.

Refer technical questions and information to:

SMSgt Mikkael Hahn Contracting Officer 610 Militia Drive St. Paul, MN 55111 612-713-2613 Mikkael.hahn@us.af.mil image1.png