A02 SOW Grinder.docx
DOCX document 15 KB Posted
- Attached to
- Grinder Repair
- Solicitation number
- W912CN-24-Q-0044
About this file
This document is a Statement of Work (SOW) for the repair of a Solid State Media Disintegrator (Shredder/Grinder) for the United States Army Pacific G6 command at Fort Shafter, Hawaii. The purpose of this SOW is to provide the minimal details required to repair the broken disintegrator device, which is used to destroy classified solid state hard drives.
The scope of the work includes the removal and replacement of the defective part (972-1042: SSMD Grinder Rotary Cutter Replacement Assembly) and the disposal of any material used and removed from the device. The work is to be performed onsite at the USARPAC HQ C2F facility and must be pre-coordinated at least 2 weeks in advance of the vendor's arrival. The related federal contract opportunity, Solicitation Number W912CN-24-Q-0044, is being issued by the Department of the Army Materiel Command Army Contracting Command for the repair of the grinder.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A02 SSMD-02mm Brochure.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Army Pacific G6 - Repair of SSMD-2MM Solid State Media Disintegrator (Shredder/Grinder) Statement of Work 08 August 2024 USARPAC G6 requires a vendor
1.0 INTRODUCTION
USARPAC G6 has a requirement to repair the broken disintegrator on site at USARPAC HQ C2F facility Building 600C, Fort Shafter, Hawaii. <410 Wisser Rd, Building 600C, Fort Shafter, HI 96858> This device is intended to destroy classified solid state hard drives for the command organization.
2.0 PURPOSE
The purpose of this SOW is to provide the minimal detail required to repair the device.
3.0 SCOPE
The scope of this SOW will encompass all requirements necessary to repair the device and bring it back to full functionality. The device needs to be repaired according to the initial diagnosis provided by vendor and identified in the Market Research quote. This includes removal and replacement of the defective part (972-1042: SSMD GRINDER ROTARY CUTTER REPLACEMENT ASSEMBLY) and disposal of any material used and removed from the device. The work needs to be done onsite and precoordinated at least 2 weeks in advance of arrival to do the work.
File details come from the government source that posted it. Updated .