A02- SOW - DOZER LEASE.docx
DOCX document 38 KB Posted
- Attached to
- Synopsis for Bulldozer Rental/Lease
- Solicitation number
- W519TC-25-T-2003
- Issued by
-
Department of the Army
About this file
This document is a Statement of Work (SOW) for a 6-month lease of a bulldozer to be used at the Anniston Munitions Center (ANMC) located at the Anniston Army Depot. The SOW specifies that the bulldozer must meet certain technical requirements, including a minimum engine net power of 354 hp and a landfill-type blade with a capacity of 22.2 m3. The vendor will be responsible for delivering the bulldozer within 48 hours of the request, performing all maintenance and repairs at no additional cost, and replacing any wear items as needed. The document also outlines the security and safety requirements, as well as the normal operating hours for the facility.
The related federal contract opportunity is a synopsis for a small business set-aside solicitation to procure the same bulldozer rental/lease requirements. The solicitation number is W519TC-25-T-2003, and the anticipated award date is approximately October 15, 2024. The Department of the Army, specifically the ACC-Rock Island (Blue Grass Army Depot Contracting Office), is the issuing agency.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
FOR
ANMC BULLDOZER LEASE
SOW DATE: 11 September 2024
1. PROJECT DESCRIPTION
Provide Anniston Munitions Center (ANMC) dozer lease support for 6 months.
2. TECHNICAL SPECIFICATIONS
Bulldozer Specs Cat D8 or equivalent
Engine Net Power -minimum 354 hp
ISO 9249/SAE J1349
Engine Power - minimum 394 hp
ISO 14396
Bulldozer Blade +/- 10% Type - Landfill (U Blade) Capacity - 22.2 m³ | 29.0 yd³, Width over End Bits - 4543 mm | 14.9 ft, Height 2454 mm | 8.0 ft
Standard (single shank ripper) Size - 39 750 kg, 87,600 lb. +/- 10%
3. PROJECT REQUIREMENTS
Vendor/Contractor will provide the requested equipment to be delivered to Anniston Munitions Center (ANMC). Delivery (BLDG 727) will be required to be made within 48 hours of receiving the request.
Vendor/Contractor will perform all service calls for repairs and 500-hour (or Manufacturer Specified number of hours) regular maintenance (oil change, replace air filters, replace fuel filters) at no additional cost. Operators are required to inspect air filters, keep the machine greased, and check fluids daily. ANMC/U.S. Government are also required to call in/inform the vendor when the 500-hour (or Manufacturer Specified number if hours) service is due. Wear item cost will be the vendor/contractor’s responsibility for replacement as needed (blade cutting edges and teeth.) Vendor/Contractor will repair/replace dozer within 48 hours of service call if needed.
4. SECURITY/SAFETY
Bldg. 727 is located in the Restricted Area of Anniston Army Depot. All ANAD Security/Safety Requirements, including antiterrorism requirements, will be in effect for this project as per applicable contractual security requirements. Reference the contract clauses and Accident Prevention as prescribed in FAR 52.236-13 for more specific information regarding Security/Safety requirements.
5. SCHEDULING WORK
Building 727 is normally occupied from 0630 to 1700 Monday through Thursday. Please coordinate any deliveries or pickups within 48 hours if possible.
6. PERFORMANCE TIME
As soon as practical. Continue for 6 months.
END OF STATEMENT OF WORK
Restricted
File details come from the government source that posted it. Updated .