A02 SOW Cage and Bench.docx

MINNESOTA AIR NATIONAL GUARD

HEADQUARTERS 133RD AIRLIFT WING (AMC)

SAINT PAUL MINNESOTA

18 Sep 2021

STATEMENT OF WORK

1. Project Title: Mezzanine Cage and Work Benches

687 General Miller Dr.

St Paul, MN 55111

3. Description of Work: This project involves the work as described herein to be accomplished at the above location, with all labor, equipment, supplies and materials to be provided by the contractor. All work shall be accomplished under environmental conditions appropriate to the nature of the project. Work will comply with all local, state, and federal regulations; to include NEC, EPA, OSHA, Minnesota State Building Codes, as well as USAF and Air National Guard regulations. Work shall include but not necessarily limited to: provide materials to fully cage a mezzanine w/ lockable sliding doors and include a workbench with fluid drain capability.

4. Detailed Requirements:

A. Mezzanine Cage bldg. 687.

· Approximately 60 Linear feet of wire mesh enclosure material @ 8’2” high

· 2 Sliding mesh doors with standard keyed locks @ 5’7” high

· All included mounting hardware and bracing in the color of dark gray to match existing mezzanine

· Must fit existing Equipto Brand mezzanine

· Must cover a dimensioned space of at least 40 feet long by 8 feet tall and 10 feet long by 8 feet tall.

B. Fluid Drain Work Bench and Storage Shelving Bldg. 687.

· Two Tray rolling carts, Approximately 24”x36”x36” - Qty. 4 each.

· Approximately 30”x48”x34” workbench with casters and fluid Containing top w/drain

· Approximately 6” Hardwood Topped Work Bench

· Approximately 36”x24”x78” combination cabinet

· Approximately 36”x24”x78” wardrobe cabinet

· Approximately 6”x43 1/8” shelving unit with ability to lock and install dividers or bins for small parts. Must fit on Hardwood bench – Qty. 3each.

Demo material is to be hauled offsite by contractor and disposed of according to State of Minnesota and Federal laws. Disposal site and quantity will be provided to the 133rd Base Environmental Office prior to final walkthrough.

Contractor required to field verify all measurements and directional orientations prior to installation.

5. Warranty: All materials shall be warranted to be in compliance with this statement of work and to the highest standards of the industry. Minimum warranty of 1 year.

6. Work Hours: The Contractor shall provide services between the hours of 0700-1600 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at Building 687.

Refer technical questions and information to:

SMSgt Mikkael Hahn Contracting Officer 610 Militia Drive St. Paul, MN 55111 612-713-2613 Mikkael.hahn@us.af.mil image1.png