A02-Purchase Description_11945803_20230605_Redacted.pdf
PDF 186 KB Posted
- Solicitation number
- W91ZLK-23-Q-0039
About this file
This purchase description outlines requirements for a magnetic particle horizontal wet bench magnetic particle inspection system to be utilized by the Aberdeen Test Center for testing weapon systems, components, and other non-weapon items. The purchase description specifies that the system must produce 6000 amperes of three phase FWDC, include a 25-inch diameter magnetizing coil and auxiliary output cables, allow for reversing demagnetization, and include custom designed steady rests for mortar tube inspection. Additionally, the system must have a hood assembly with exhaust fan and white lights, pneumatically raising and lowering hood, two LED ultraviolet lights, and 20 ampere convenience outlets. The single point electrical connection requires 240V, three phase, 60Hz power and an 80-100 psi airline connection. Related items including carrier fluid and magnetic particles will be delivered separately. The vendor will be responsible for minor adjustments, leveling, and calibration of the equipment once installed at the Aberdeen Test Center facility.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description
Magnetic Particle Horizontal Wet Bench Magnetic Particle Inspection
Aberdeen Testing Center
PR # 11945803
The applied science test division non-destructive test branch (NDTB) at Aberdeen Test Center (ATC) requires the purchase of a horizontal wet bench magnetic particle inspection station of one (1) Each. This Equipment will be utilized to conduct magnetic particle inspections for weapon systems and weapon system components going through proof acceptance testing as well as various other non-weapon components being subjected to testing at ATC.
Required magnetic particle horizontal wet bench specifications:
QTY: 1ea
• Produce 6000 amperes of three phase FWDC
• Head opening to allow inspection of parts to 100 inches of length
• Unit to be equipped with a 25-inch diameter magnetizing coil
• Unit to be equipped with a with an auxiliary output with cables to allow inspection with central conductor
• Unit to be capable of reversing FWDC demagnetization
• The contacts and coil outputs are independently controlled
• Current output setting and selector switches shall be physical dials or switches.
• Unit to have custom designed steady rest to allow inspection of mortar tubes
• Unit to include a hood assembly with exhaust fan and white light
• Unit hood shall be equipped with a hood assist feature that pneumatically raises and lowers the hood
• Unit to include 2ea REL UV-3000NC LED ultraviolet lights with visible light capability
• Unit to include 20 ampere convivence outlets
• The MPI unit will have a single point connection requiring 240V, three phase, 60 hertz, and an airline requiring 80-100 psi. Each hook up will be clearly marked and meet industry requirements.
• The MPI unit will be shipped via truck to B525 at ATC. ATC will be responsible for unloading and placement of equipment. ATC will verify electrical and air connections.
• The (1) 55-gallon drums of Magnaflux Carrier II will be shipped via truck to ATC. This item is commonly sent to ATC. ATC is responsible for unloading the drum and placing it at the MPI unit. SEL will deliver (1) Magnaflux 14A Magnetic Particles, one pound container. This item will be hand delivered at time of set-up.
• The vendor is responsible to make minor adjustments to level the equipment and for final calibration once machine is set up. The vendor is not responsible for renovations or
File details come from the government source that posted it. Updated .